Search found 4 matches

by DocMooney
Thu Sep 03, 2015 5:25 pm
Forum: Assembly
Topic: 3.1 upgrade, Fan Assembly
Replies: 4
Views: 1407

Re: 3.1 upgrade, Fan Assembly

The one you have labelled as correct (which I suspected was the case), can't get the nut on the bolt (see the attached image *04). If you compare the two bolt on the side closest to the camera, the bolt is simply not long enough to reach beyond the plastic frame. I could compress the shroud, elimina...
by DocMooney
Tue Sep 01, 2015 1:14 am
Forum: Assembly
Topic: 3.1 upgrade, Fan Assembly
Replies: 4
Views: 1407

Re: 3.1 upgrade, Fan Assembly

Yep.. (hence the reference to step 49a) The assembly showing in the images I attached was just while I was trying to figure it out and take the images. The side the nut goes on seems to be the thicker side, leading the bolt to be of inadequate length unless you 'collapse' the shroud around the fan. ...
by DocMooney
Sun Aug 30, 2015 11:59 pm
Forum: Assembly
Topic: 3.1 upgrade, Fan Assembly
Replies: 4
Views: 1407

3.1 upgrade, Fan Assembly

Working on the upgrade (dual 3.0 to dual 3.1), and step 49a ( in the 3.1 assembly manual) is a problem... The thickness of the frame seems to allow attaching the fans in only one way, which is not the way pictured. To have the bolt into the nut, I would have to warp the fan shroud. Am I missing some...
by DocMooney
Sat Jan 11, 2014 4:29 pm
Forum: Assembly
Topic: v3 Filament cleaner & other bits?
Replies: 2
Views: 869

v3 Filament cleaner & other bits?

I've received the v3(dual extruder), and I'm trying to figure out the 'extra bits' that came in the package. Unfortunately, there was absolutely no documentation in the shipment (though the hardware was really well packed. Bravo). I've gotten that the triangular bits go with the bearings to form spo...