Page 1 of 1

5v or 12v power output for pi zero

Posted: Wed Aug 02, 2017 10:38 am
by KiekisNL
Hi,

i'm working on a mod to build in a Raspberry Pi Zero W in the housing of my Felix 3.1 (soon Tec4) and i was wondering if i there is a 5v or a 12v output on the board to power the Pi Zero.
if there is not a 5v iw will build in a small converter with the pi so thats not a problem.

further more i'm thinking of hardwire the usb port of the felix to the pi zero.
when its done i

are there more people that did this??

kind regards

Re: 5v or 12v power output for pi zero

Posted: Thu Aug 03, 2017 5:57 am
by DDME-Marc
Hello,

See attached links for 5V output on the Felix board. Just take note which version of board you have, as discussion in the links centres primarily around version 2.0 and 2.1 boards.

http://www.felixprinters.com/forum/view ... 8437#p8437

http://www.felixprinters.com/forum/view ... 9&start=20

Cheers,

Marc

Re: 5v or 12v power output for pi zero

Posted: Fri Aug 04, 2017 5:23 pm
by KiekisNL
I have the 3.0 board
Thanks, with my dc meter found the 5V power from the supply to the board. (Green and purple wire)
Image

Wired the pi zero not yet to the board but the pi is ready to be build in and the server works like a charm 8-) :D
Image
Image