Try to make object sketchup but don't work

Discussions about firmware/slicing software, tweaks and settings
Post Reply
martingaud
Posts: 7
Joined: Wed Jan 01, 2014 11:36 pm

Try to make object sketchup but don't work

Post by martingaud »

Hi everyone!

I just purchased my felix 2.0 and I like it a lot!

I know a lot sketchup and try to get the .stl extension...

It work and don't work... so I transfer to .obj, take it to another software (desingspark mecanical 1.0) and transfer it to .stl...

The big problem was the proportions.... in sketchup the object mesurement is 0.378" and in the felix repetier host it was to big for print.....

Do you have a free software to suggest ???

Thanks a lot!!!!!!!!!!!!!

Mayhem
Posts: 169
Joined: Tue Jan 08, 2013 4:15 pm
Location: Finland

Post by Mayhem »

Download stl plugin for the sketchup and then you can export stl.
Felix 2.0----> 3.0
V4 hot end
Simplyfy 3D
Kisslicer
Autodesk fusion 360

martingaud
Posts: 7
Joined: Wed Jan 01, 2014 11:36 pm

Post by martingaud »

It's done, everything work... Look at my desktop you will see that the ''newcube'' is a .stl file that I downloaded and skipole is a .stl created by sketchup.......It look like it wasn't .stl....
.stl trouble.JPG
.stl trouble 2.JPG

Post Reply

Return to “Software/Firmware”