Felix 3.0 Dual - Slizer setting shown in manual not availabl

Discussions about firmware/slicing software, tweaks and settings
Post Reply
frankjoke
Posts: 150
Joined: Sat Dec 28, 2013 6:07 pm

Re: Felix 3.0 Dual - Slizer setting shown in manual not avai

Post by frankjoke »

Saamec,

thanks for the tips but this seems to be for SFACT!

Will try, but could not manage dual extruder support (PLA+PVA) on second extruder with SFACT and therefore I had to use Kisslicer and I don't know if it can handle this as well.

mccube
Posts: 3
Joined: Tue Feb 04, 2014 4:16 am

Post by mccube »

Hi,
Any suggestion on where I should buy the PVA filament?

Saamec
Posts: 157
Joined: Fri Jun 21, 2013 9:28 am

Post by Saamec »

mccube wrote:Привет, Любые предложения о том, где я должен купить ПВА нити?
OFF TOP. GOOGLE, EBAY

User avatar
DDME-Marc
Posts: 71
Joined: Sun Nov 24, 2013 11:04 pm
Location: New Zealand

Post by DDME-Marc »

Hi mccube,

In terms of PVA filament I would suggest one place to look is at http://www.plastic2print.com. Please note we are not in any way affiliated with Plastic2Print, we just get good service, fast delivery, coupled with reasonable with prices.

Although our latest purchase last week was for HIPS filament (also dissolvable) we noticed the PVA prices looked reasonable.

Failing that, as Saamec has already said Google away.

Cheers,

Marc
Felix 3.0 Dual Head * E3D Titan V6 * Repetier-Host V2.1.3 * Repetier-Firmware 0.92.9 (01/08/17 - Modified) * KISSlicer Pro - 1.6.3 * Arduino 1.8.5 *

mccube
Posts: 3
Joined: Tue Feb 04, 2014 4:16 am

Post by mccube »

Thanks much :)

frankjoke
Posts: 150
Joined: Sat Dec 28, 2013 6:07 pm

Post by frankjoke »

Slowly I am getting along with the printer!

I learned to tweak material and print settings in Kisslicer (who is the only one which generates predictable results for single and dual).

I created diferent printer presets for single and dual printing (with PVA or only dual color).
I also realized that I have PLA from different vendors which need different temperatures and retracting :(. Best is to test new PLY and check with some very small prints (3 layers) if settings are OK.

Dear Admin! Why are you displaying pictures without right orientation!
Valentine is coming! Gear heart with PVA support printing
Valentine is coming! Gear heart with PVA support printing
p.s.: I gave up on Kapton, use only inkjet transparencies any more! Much easier to put onto the bed and sticks better than anything else without hairspray or other tools. I use also my self written post processor to automatically reduce bed temperature on 3rd layer to 40 degrees ...

Bitpower
Posts: 10
Joined: Mon Dec 16, 2013 11:05 pm

Post by Bitpower »

Hi frank joke,
Want to share the settings for dual print (kisslicer pro)?
I myself do not have good results.
Where do you buy the inkjet transparencies?
Kind regards Bit

mccube
Posts: 3
Joined: Tue Feb 04, 2014 4:16 am

Post by mccube »

Hi all,
I am a newbie and having trouble to print a simple dual color model with my Felix 3.0 dual extruder (using PLA material). Can anyone share with me tips on a printing a dual color model? Would be really grateful if anyone could send me the STL file of the dual color print model, the printer and software settings/configuration, materials used, etc.

Thanks in advance.
Best regards,
mccube

frankjoke
Posts: 150
Joined: Sat Dec 28, 2013 6:07 pm

Post by frankjoke »

I bought them @Amazon:http://www.amazon.de/gp/product/B0002S4CRM
Look for same company and full sheet clear label on your amazon.

Post Reply

Return to “Software/Firmware”