Help with LCD controller!

This is for general discussions. Also FAQ can be found here.

Moderator: speedake95

Post Reply
Posts: 120
Joined: Tue Jul 17, 2012 9:04 pm
Location: United Kingdom

Help with LCD controller!

Post by stratogavster »

Hi All,

Just reposting this as actually had moved on fro mit in pursuit of other thins but back on the LCD again.

The 4th line of my LCD rarely shows anything.....only the 'Felix 1.0' on startup and 'card inserted' or 'card removed'.

Examples of this LCD show other info being shown, like 'Heating done' etc etc.....I was wondering is there something in the firmware that needs to be enabled?


Post Reply

Return to “General”