I did this quick design of a camera mount for he Felix 3.0 Printer. Velcro works great for smart phones. The holes in the sides of the spherical joint are sized for a 1/4-20 tap. The holes in the mount are #8 flathead sheet metal screws. Use a #6 for the top one, the hole in the mating part is small.
Photo:
http://tinyurl.com/nt3pm8c
STL File:
https://drive.google.com/file/d/0B00Q4j ... sp=sharing
This is the first time lapse movie I made with the 4S as a test.
http://youtu.be/O9myKeSjiwQ
The Mark II design will follow shortly.
