thermistor case

Post Reply
Posts: 33
Joined: Sun Mar 30, 2014 1:59 pm

thermistor case

Post by stillcool40 »

I got a couple of bare thermistors and have been looking for the tube the felix ones are fitted to.

cant find anything with thin enough wall to take it.

anyone any idea where the tube comes from,

Posts: 436
Joined: Mon Oct 01, 2012 8:00 pm
Location: Netherlands

Post by satoer »

Just isolate the wire's with silicone tubing (I used the silicon isolation stripped from the heater resistor) and glue it in with the heat resistant silicone glue what came with the kit.
Use a piece of shrinkwrap or tie-wrap to bundle it with the heater resistor wire to restrain it.

My Felix 1.5 printed designs on Thingiverse
E3D V6 Hot end upgrade for your Felix
Tweezer bracket for your Felix
Led bar upgrade for your Felix

Post Reply