Simple E3D V6 Upgrade to our felix 3.0

This is the place to show off your felix printer hacks and improvements.
Post Reply
Pacificimc
Posts: 13
Joined: Tue Oct 22, 2013 7:43 pm

Simple E3D V6 Upgrade to our felix 3.0

Post by Pacificimc »

We just bolted a aluminum hotend mounting plates to our existing Injection molded Felix 3.0 holder. It is very solid and you can remove the whole E3D very easily when needed. I think the reduction in wight of the E3D increased our print quality as well.....Thanks B
Attachments
Screen Shot 2014-10-01.png
photo-10.JPG

satoer
Posts: 436
Joined: Mon Oct 01, 2012 8:00 pm
Location: Netherlands

Post by satoer »

I love the E3D hot-end! No more jaming.
Coincidently I’ve just updated my V5 design to the V6. It has a extruded filament cooler and the hotend is on the same height as the original hot end (so you won’t lose precious Z space).
http://forum.felixprinters.com/viewtopic.php?f=9&t=1078
My Felix 1.5 printed designs on Thingiverse
E3D V6 Hot end upgrade for your Felix
Tweezer bracket for your Felix
Led bar upgrade for your Felix

Post Reply

Return to “Hacks and printer upgrades”