Repetier Host Freezes/ gets stuck

Discussions about firmware/slicing software, tweaks and settings
Post Reply
Posts: 9
Joined: Fri Nov 22, 2013 4:12 pm

Repetier Host Freezes/ gets stuck

Post by retsac »


Wanted to start printing today, but when I push 'start print' in repetier host it gets stuck after a few seconds. And the printer stops, with repetier host saying: 'repetier doesn't react anymore. I tried different gcode, all with the same end result so its the software or the software on the printer itself.

I tried 2 different repertiers (latest one, and a old one: 0.90) the same problem after a few seconds.

Can someone help?
Felix 3.0
DUAL extruder
LCD display

Post Reply