Extruder does not react

General discussions regarding hardware
Post Reply
immi1988
Posts: 5
Joined: Thu Jul 24, 2014 10:17 am

Extruder does not react

Post by immi1988 »

Hello all,

my extruder does not react in manual control.
After trying to replace the filament the extruder does not react with manual control in Repetier host.
I am using FW 0.91 and Repetierhost 1.05.

How to find the error?

Kind regards
Immanuel

immi1988
Posts: 5
Joined: Thu Jul 24, 2014 10:17 am

Post by immi1988 »

I can insert filament using LCD control panel.

immi1988
Posts: 5
Joined: Thu Jul 24, 2014 10:17 am

Post by immi1988 »

And another Update:
The printer shows after one action in manual control: "Idle" on the LCD.

kerog
Posts: 117
Joined: Mon Jun 09, 2014 1:54 am

Post by kerog »

Do you have the extruder heated up? It won't respond if not close to the set temperature...

immi1988
Posts: 5
Joined: Thu Jul 24, 2014 10:17 am

Post by immi1988 »

Thank you, that solved the "problem".

Post Reply