FELIX printable spare parts

In here you will find news posted officially by FELIXprinters.

Moderator: speedake95

Post Reply
satoer
Posts: 436
Joined: Mon Oct 01, 2012 8:00 pm
Location: Netherlands

Re: FELIX printable spare parts

Post by satoer »

You can download the electonics box over here: http://www.felixprinters.com/forum/view ... p?f=7&t=86
My Felix 1.5 printed designs on Thingiverse
E3D V6 Hot end upgrade for your Felix
Tweezer bracket for your Felix
Led bar upgrade for your Felix

killejano
Posts: 92
Joined: Mon Apr 01, 2013 7:23 pm

Post by killejano »

Tanks a lot!

naser404
Posts: 22
Joined: Sat Jan 19, 2013 4:17 pm

Post by naser404 »

Can anyone post an .stl file for this part, Its getting cracked & need to print a spare one before it breaks, I would rather have the .stl file to print it at higher quality and give it a thicker fill but if not than a G-Code will do please.

here is the part

Image

Image

jayismyson
Posts: 3
Joined: Tue Jul 02, 2013 11:36 am

Post by jayismyson »

they would even be better i think.
___________________________________
Age Of Wushu Gold

aldaleze
Posts: 5
Joined: Fri Jul 05, 2013 8:59 am

Post by aldaleze »

Do any of you know if I can get the .stl file of the part "Extru_base_v9_F1_5" somewhere? I need to print it out using another printer, which doesn't accept the GCode provided in this post. Or maybe a way of converting GCode back to .stl... Thanks a lot!

Mayhem
Posts: 169
Joined: Tue Jan 08, 2013 4:15 pm
Location: Finland

Post by Mayhem »

Felix 2.0----> 3.0
V4 hot end
Simplyfy 3D
Kisslicer
Autodesk fusion 360

aldaleze
Posts: 5
Joined: Fri Jul 05, 2013 8:59 am

Post by aldaleze »

Cool! Thank you very much Mayhem!

CarterD
Posts: 3
Joined: Sat Sep 22, 2012 1:10 am
Location: USA

Post by CarterD »

I just noticed today that the belt mount for the x-axis on my Felix 1.0 is cracked. I've searched the forums and can't find a STL or gcode to print another one. Can someone please tell me where I can find it so I can print a replacement before it totally goes?

dognotdog
Posts: 181
Joined: Tue Sep 04, 2012 9:22 pm

Post by dognotdog »

If you do find the STLs (I can't either), I recommend printing the 2.0 version. I used the "two arm" version for a long time, and one arm completely broke eventually.

CarterD
Posts: 3
Joined: Sat Sep 22, 2012 1:10 am
Location: USA

Post by CarterD »

I'll take a file for any version I can get. All I'm finding is extruder assembly parts.

Post Reply