FELIX 3: Wrong time calculation

Discussions about firmware/slicing software, tweaks and settings
Post Reply
Posts: 3
Joined: Fri Jan 02, 2015 8:41 pm

FELIX 3: Wrong time calculation

Post by Rafjax »

i use the Felix 3.0 printer with dual head.
The software on the pc is "Repetier-Host V1.0.5"

The time calculation for my print job stands on 8 hours 5 mins. (Slicer preview)

I start the print at 14:11 pm. Now it is 08:48 pm and the software (pc) says me that the balance time for finisch is 2 hours 48 mins.

Have somebody this problem ?

Post Reply