SFACT / SKEINFORGE Settings embedded in GCODE?

This is for general discussions. Also FAQ can be found here.

Moderator: speedake95

Post Reply
stratogavster
Posts: 120
Joined: Tue Jul 17, 2012 9:04 pm
Location: United Kingdom

SFACT / SKEINFORGE Settings embedded in GCODE?

Post by stratogavster »

Hope this isn't a silly question....but I wondered if the SFACT parameters / settings are embedded within the GCODE? if not can they be?

I think it's a useful addition to create for tracking tweaks vs prints

If it's already in there can somebody guide me to it....(can't see anything useful)...if it is possible anybody show me how to enable this?

:)

satoer
Posts: 436
Joined: Mon Oct 01, 2012 8:00 pm
Location: Netherlands

Post by satoer »

Nope, there not embedded. But you can add comments yourself by adding a ";" before the comment. This way the Marlin firmware will ignore this comment.
My Felix 1.5 printed designs on Thingiverse
E3D V6 Hot end upgrade for your Felix
Tweezer bracket for your Felix
Led bar upgrade for your Felix

stratogavster
Posts: 120
Joined: Tue Jul 17, 2012 9:04 pm
Location: United Kingdom

Post by stratogavster »

I managed to find a feature called SYNOPSIS which (if I understand correctly) exports the settings in a CSV file....but sadly can't get it to work.

Don't really want to be manually recording settings, seems a slow method and one prone to human error.

http://fabmetheus.crsndoo.com/wiki/inde ... e_Synopsis

Sündi
Posts: 16
Joined: Fri Oct 12, 2012 7:32 pm

Post by Sündi »

I have tried it. And it worked. Take a look in the working directory of Repetier host? In my case there was a file called: composition_export_synopsis.csv

stratogavster
Posts: 120
Joined: Tue Jul 17, 2012 9:04 pm
Location: United Kingdom

Post by stratogavster »

Not working for me :(

No file in the working directory, though there is a file in the active profile folder, though it's untouched and only states the settings of the synopsis feature itself :(

Post Reply