Bug Repetier Mac Host with gcode from kisslicer

Discussions about firmware/slicing software, tweaks and settings
Post Reply
Marcio Ambrosio
Posts: 3
Joined: Sun Mar 30, 2014 1:51 pm

Bug Repetier Mac Host with gcode from kisslicer

Post by Marcio Ambrosio »

Hello Guys!
I have a problem printing gcode created with kisslicer (on PC) and loaded in Repetier host on a mac system. It seems that it doesn't extrude and doesn't recognize the good x/y/z values. Cant' print anything…
When loading this same gcode in Repetier Pc host, works perfect!

Does anybody have this bug and solve it?
I'm working with Felix 3.0 last firmware.

Thank's for helping

Posts: 35
Joined: Fri Dec 05, 2014 11:14 pm
Location: Luxembourg

Post by fesch »

I have a Mac an do not have in problems in any combination with these software. I use a PC, my Mac as well as direct printing from the SD-card ...

Post Reply

Return to “Software/Firmware”