Printing close to 100℅ metal parts with new filament on Kick

This is for general discussions. Also FAQ can be found here.

Moderator: speedake95

Post Reply
Hugues
Posts: 270
Joined: Thu Apr 04, 2013 5:36 pm

Printing close to 100℅ metal parts with new filament on Kick

Post by Hugues »

New PLA- metal filament allows you to print close to 100% metal parts:

https://www.kickstarter.com/projects/87 ... ists/posts

Almost funded, we need your help !
Hugues
Regards from Switzerland

Post Reply