Gcode straight on sd card?

Discussions about firmware/slicing software, tweaks and settings
Post Reply
wilco02
Posts: 8
Joined: Sat Mar 14, 2015 6:39 pm

Gcode straight on sd card?

Post by wilco02 »

Is it possible to convert the Gcode straight to the sd card, without using the usb cable between printer and computer. This will save me alot of time. Hopefully this is possible.. :D

Already thanks.

Wilco.

kerog
Posts: 117
Joined: Mon Jun 09, 2014 1:54 am

Post by kerog »

Yes, simply insert the SD card in your computer and copy the file. You'll need an adapter from MicroSD to SD if your computer has an SD port; if not, you'll need a MicroSD to USB adapter.

wilco02
Posts: 8
Joined: Sat Mar 14, 2015 6:39 pm

Post by wilco02 »

Hmmm, that easy. Thanks :D
And do you know what the reason that the file that are uploaded through the printer are complete different?

Greetz.

Post Reply