Backlight on LCD Failed

General discussions regarding hardware
Post Reply
Posts: 23
Joined: Wed Feb 18, 2015 5:28 am

Backlight on LCD Failed

Post by Bobbystone »

Any thoughts on how to fix this? Or how to get a replacement?


User avatar
Posts: 37
Joined: Thu Dec 24, 2015 4:22 pm

Post by janwijbrand »

I guess I would send an email to Felix printers for more info as apparently no one can help you out here.

Hopefully it is something you can easily fix. Please let us know how you resolved the issue in the end!

Felix 3.1 single extruder, soon to be Tec 4 dual

Posts: 291
Joined: Tue May 14, 2013 9:04 am
Location: Bunbury, Western Australia

Post by seaton »

Is a standard 4x20 LCD with backlight you can buy on Get one for the Ramsp controller and will have all the connectors. I had bought one as a spare previously and when same thing happened to mine I just used the replacement no problems.

with LCD being on all the time the backlight eventually fades over time until you can't see it.


Felix 2.0 -> Felix 3.0 dual
Simplify3D Slicer, Kisslicer
Have you added your Felix to the Map?

Post Reply

Return to “General”