Felix 2.0 sample _40x10 print problem

[Asxetius]

Hi from Greece
(sorry for my english, google translate )

Α week ago a good friend of mine,
he made me a gift Felix 2.0 version 3- 2-september-2013.
Used for half filament.

Software
windows 7 ultimate
repetier v.1.0.6


Sample
_40x10.stl

Slice with SFact
2_1_Normal_quality_no_support

PLA 1.75mm color RED
Print Temp 170-240C

Feedrate 100
Flowrate 100
Fan 100
Bed Temp 57
Extruder Temp 195

The final result after several printouts
Any idea?

[aikx]

Slice with SFact
2_1_Normal_quality_no_support
PLA 1.75mm color RED
Print Temp 170-240C
Feedrate 100

First reduce the distance between Hotend and bed, use a sheet of paper.
Second try a Feedrate of 50%, to see if the extruder has a problem?

[Asxetius]

Thank you very much my friend.

I reduced the distance between the hotend and bed
and the result is 100% ok

Best regards

[Asxetius]

ok