Common problems/Tips and tricks

Moderator: speedake95

Post Reply
Posts: 2
Joined: Tue Oct 18, 2016 9:13 pm

Re: Common problems/Tips and tricks

Post by Muyz »

How can you bed heat up to 100degC? Do you use an enclosure?

User avatar
Posts: 71
Joined: Sun Nov 24, 2013 11:04 pm
Location: New Zealand

Post by DDME-Marc »

Try insulating the bottom surface of the bed.

Various solutions have been used, ranging from cardboard, ironing board pad, etc, etc.

Personally I would be cautious using cardboard, and opted for aluminium foil tape instead as these are typically rated for 120 or more degrees Celsius (with the added bonus being one of the the lightest options).
Most tapes have an adhesive backing so simply stick on as many layers as needed to improve insulation. As it stands my configuration can just reach 100 degrees, and I recall guys reaching over 105 degrees with other materials.


Felix 3.0 Dual Head * E3D Titan V6 * Repetier-Host V2.1.3 * Repetier-Firmware 0.92.9 (01/08/17 - Modified) * KISSlicer Pro - 1.6.3 * Arduino 1.8.5 *

Post Reply

Return to “Tips and Tricks”