material in bed

This is for general discussions. Also FAQ can be found here.

Moderator: speedake95

Post Reply
AnttiS
Posts: 6
Joined: Tue Feb 26, 2013 12:16 pm

material in bed

Post by AnttiS »

How material stay in place in printing bed during printing?

Kjetilei
Posts: 334
Joined: Fri Mar 16, 2012 8:26 pm
Location: Stavanger, Norway

Post by Kjetilei »

The easiest way: use Scotch Blue painters tape and 55-60 degrees on the hotbed. You'll find more information on possible solutions by searching this forum or forums.reprap.org.

Post Reply