hallo Jungs!
ich hab nun auch den Felix pro 1 ,ist ein schönes gerät.nu hab ich schon ein problem mit meinem Felix^^.... z sensor triggered,,,das zeigt er mir nu an und das druckbett fährt nur nach unten nicht nach oben zum Extruder, brauch da mal hilfe.
lg jünni
Felix Pro 1 druckt nicht
-
- Posts: 8
- Joined: Tue Apr 26, 2016 11:03 am
Hallo Junni,
Das tut uns leit zu horen. Aber zum gluck is das problem sehr einfach zu losen. Das problem is das deine z-sensor (im druckkopf) hangt und die ganze seit geschaltet ist. Daswegen fahr dein druckbett nicht mehr nach oben.
Um das problem zu losen hab ich Sie eine anleitung geschickt auf ihres email. Viel erfolg!
Mit freundlichen GruBen,
Sven
Das tut uns leit zu horen. Aber zum gluck is das problem sehr einfach zu losen. Das problem is das deine z-sensor (im druckkopf) hangt und die ganze seit geschaltet ist. Daswegen fahr dein druckbett nicht mehr nach oben.
Um das problem zu losen hab ich Sie eine anleitung geschickt auf ihres email. Viel erfolg!
Mit freundlichen GruBen,
Sven
-
- Posts: 8
- Joined: Tue Apr 26, 2016 11:03 am
Dear Senior800,
I'm glad to hear from my colleges that you have already received the manual. If you have any more questions please do not hesitate to ask them.
I'm glad to hear from my colleges that you have already received the manual. If you have any more questions please do not hesitate to ask them.
- gfeliksdal
- Site Admin
- Posts: 405
- Joined: Sat Feb 25, 2012 10:40 pm
- Location: Netherlands
- Contact:
Hi Migele,
I just send you the manual.
I just send you the manual.