Sloped printing when printing dual parts

This is for general discussions. Also FAQ can be found here.

Moderator: speedake95

Post Reply
tomasf
Posts: 5
Joined: Tue Apr 09, 2013 10:23 pm

Sloped printing when printing dual parts

Post by tomasf »

Hi,
any idea how do resolve this problem ?
Printing a single box works fine.
Printing two boxes at the same time ( command "copy object" ) gives a sloped result...
Attachments
Dual printing sloped.jpg

dognotdog
Posts: 181
Joined: Tue Sep 04, 2012 9:22 pm

Post by dognotdog »

That looks very strange. Could be step loss, if the gcode is alright. Maybe try printing simple cubes to test?

rad
Posts: 36
Joined: Thu Apr 18, 2013 7:33 pm

Post by rad »

if its object position depending then maybe your table turns/rotates in x/y when moving in Z

Post Reply