Sensitivity menu selection knob

Post Reply
Hans
Posts: 2
Joined: Sat Feb 18, 2017 12:24 pm

Sensitivity menu selection knob

Post by Hans »

Hi,

Sometimes when i press the selection knob for selecting a menu item, one upper or lower menu item is selected and activated instead. Very anoying ! (especially if you want to change an item during printing, since the controller is below the moving bed)
Is it possibble to adjust the knob rotation sensitivity or improve software of the encoder readout to make it less sensitive ?
Maybe also an idea to move the LCD + knob in a seperate box to the top of the printer ? (LCD could be operated in serial mode or converted to e.g. I2C to save wiring)

Regards,

Hans

Post Reply