Qualty of printed objects is getting bad (Felix 3.0)

Post Reply
Regenmacher
Posts: 4
Joined: Mon Feb 23, 2015 6:42 pm

Qualty of printed objects is getting bad (Felix 3.0)

Post by Regenmacher »

Hello,
unfortunately the results of my printer are lately getting worse. The individual layers appear to be slightly offset.
I already have the straps stretched, everything is cleaned and lubricated.

None of this helped.

Does anyone have a tip?

Greeting,
Manfred
Attachments
18672884_1368155539927706_1456702713232834052_o.jpg

Dreide
Posts: 176
Joined: Sun Sep 29, 2013 12:32 am
Location: Lausanne, Switzerland

Post by Dreide »

I recommend checking the set screws of the pulleys (X and Y) and, while you are at it, also the set screws of the Z spindle and the extruder drive.
Felix 2.0->3.0dual * Repetier (host+firmware) * KISSlicer Pro, Simplify3D * Cubify Design

Post Reply