5v or 12v power output for pi zero

Discussions about the electronics
Post Reply
KiekisNL
Posts: 2
Joined: Mon Jul 31, 2017 8:20 am

5v or 12v power output for pi zero

Post by KiekisNL »

Hi,

i'm working on a mod to build in a Raspberry Pi Zero W in the housing of my Felix 3.1 (soon Tec4) and i was wondering if i there is a 5v or a 12v output on the board to power the Pi Zero.
if there is not a 5v iw will build in a small converter with the pi so thats not a problem.

further more i'm thinking of hardwire the usb port of the felix to the pi zero.
when its done i

are there more people that did this??

kind regards

User avatar
DDME-Marc
Posts: 71
Joined: Sun Nov 24, 2013 11:04 pm
Location: New Zealand

Post by DDME-Marc »

Hello,

See attached links for 5V output on the Felix board. Just take note which version of board you have, as discussion in the links centres primarily around version 2.0 and 2.1 boards.

http://www.felixprinters.com/forum/view ... 8437#p8437

http://www.felixprinters.com/forum/view ... 9&start=20

Cheers,

Marc
Felix 3.0 Dual Head * E3D Titan V6 * Repetier-Host V2.1.3 * Repetier-Firmware 0.92.9 (01/08/17 - Modified) * KISSlicer Pro - 1.6.3 * Arduino 1.8.5 *

KiekisNL
Posts: 2
Joined: Mon Jul 31, 2017 8:20 am

Post by KiekisNL »

I have the 3.0 board
Thanks, with my dc meter found the 5V power from the supply to the board. (Green and purple wire)
Image

Wired the pi zero not yet to the board but the pi is ready to be build in and the server works like a charm 8-) :D
Image
Image

Post Reply