Support Material Removal

This is for general discussions. Also FAQ can be found here.

Moderator: speedake95

Post Reply
RobGer
Posts: 19
Joined: Thu Mar 07, 2013 10:45 pm

Support Material Removal

Post by RobGer »

Hello

I'm printing with PLA and have found that the support material is very difficult to remove as it seems to bond to the model.
With my previous UP! Plus printer the support material easily peeled away.
Any suggestions on how I can achieve this with the Felix printer?

Makron
Posts: 110
Joined: Wed Mar 20, 2013 1:29 pm

Post by Makron »

Try this settings .
Attachments
support.png

RobGer
Posts: 19
Joined: Thu Mar 07, 2013 10:45 pm

Post by RobGer »

Thanks. I will give it a go!

RobGer
Posts: 19
Joined: Thu Mar 07, 2013 10:45 pm

Post by RobGer »

Thanks Makron.

Those settings worked well.

Makron
Posts: 110
Joined: Wed Mar 20, 2013 1:29 pm

Post by Makron »

By clicking the ? mark you get an full explenation for all the settings (witch are alot) in skeinforge.
Attachments
support.png

Rhys9
Posts: 4
Joined: Tue Sep 10, 2013 11:00 am
Location: Queensland, Australia

Post by Rhys9 »

Hi Guys,

Could someone possibly Makron, re-attach the setting picture as i can't view it and would like to see what type of setting to help in removal of the support structure.

Thanks in advance.

Makron
Posts: 110
Joined: Wed Mar 20, 2013 1:29 pm

Post by Makron »

Sorry i dont work with repetier anymore.

Rhys9
Posts: 4
Joined: Tue Sep 10, 2013 11:00 am
Location: Queensland, Australia

Post by Rhys9 »

No problem i figured it out through trial and error. Thanks anyway.....

Post Reply