Felix 2.0 LCD Menu structure

Discussions about firmware/slicing software, tweaks and settings
Post Reply
Danny-Lelystad
Posts: 19
Joined: Sun Mar 17, 2013 11:20 am
Location: Netherlands

Felix 2.0 LCD Menu structure

Post by Danny-Lelystad »

Today my LCD panel from felixprinters starts working with some help from Guillaume. In case you have problems with the lcd panel (shows only 2 rows of text) you should update the firmware from your Felix2.0 printer (get it from the download section). The right boardsetting for the Arduino software (get this on from http://www.arduino.cc) is: 'Arduino Mega 2560 or Mega ADK'. Also choose the right com port.

In the download you also find a pdf file with the menu structure, but that one is not very up-to-date, so i create a new version, see att.
Attachments
Felix_2.0_Menu_Plans.pdf
Felix 2.0 LCD Menu structure
(248.42 KiB) Downloaded 93 times

And326
Posts: 26
Joined: Wed Apr 17, 2013 7:06 pm
Location: Tallinn, Estonia
Contact:

Post by And326 »

Where can I find a complete description of the menu functions?

Post Reply