Longer extruder arm screw

This is the place to show off your felix printer hacks and improvements.
Post Reply
danielkschneider
Posts: 49
Joined: Thu Apr 12, 2012 3:29 pm
Location: Geneva
Contact:

Longer extruder arm screw

Post by danielkschneider »

This is a totally trivial mod. But I managed to rip off the screw that tensions the extruder arm twice while doing something in the area and collecting the fallen down washers is a pain ....

So, I just put in a bigger one I found in the plastic box. There is no space for 2 bolts so some day I may go and buy a proper replacement :)

Image

Kjetilei
Posts: 334
Joined: Fri Mar 16, 2012 8:26 pm
Location: Stavanger, Norway

Post by Kjetilei »

Nice solution :)

Hopefully the single nut will not loosen over time.

Post Reply