WIP: Bowden Based Dual Extruder (More Reliable, Too!)

This is for general discussions. Also FAQ can be found here.

Moderator: speedake95

Post Reply
hanscl
Posts: 5
Joined: Fri Mar 21, 2014 7:27 am

Re: WIP: Bowden Based Dual Extruder (More Reliable, Too!)

Post by hanscl »

How do you calibrate with two hot ends?
See this blog post for a trick that works very well for me: http://www.cubicity.com/blog/3d-printin ... 3d-printer

Post Reply