Filement removed after printing?

This is for general discussions. Also FAQ can be found here.

Moderator: speedake95

Post Reply
Bachgassenbande
Posts: 132
Joined: Sat Jul 20, 2013 12:50 pm
Location: Würzburg

Filement removed after printing?

Post by Bachgassenbande »

What is the common proceedure after printing?
Do you remove the filament, or let it as it was?
Do you heat up the noozle, cool,.....?


The manual is not that helpful provided from Felix.

Thanks for answering
Felix 2.0
E3D Kraken Hotend
3mm Glas bed
LED light bar upgrade

Mayhem
Posts: 169
Joined: Tue Jan 08, 2013 4:15 pm
Location: Finland

Post by Mayhem »

No need to remove the filament after print.
Felix 2.0----> 3.0
V4 hot end
Simplyfy 3D
Kisslicer
Autodesk fusion 360

Bachgassenbande
Posts: 132
Joined: Sat Jul 20, 2013 12:50 pm
Location: Würzburg

Post by Bachgassenbande »

Thanks
Felix 2.0
E3D Kraken Hotend
3mm Glas bed
LED light bar upgrade

Post Reply