Just had issues with the washers and nuts falling off during printing,
so I removed the washers and crincled washeres and installed stiff springs.
Running right now for one week with these improvement and had good experience according printing and leveling the bed.
Springs are operational from -40°C to 200°C
See data sheet enclosed
Pictures of tweak are following
If someone wants to have some springs I still have a bunch of them send me a PM
Heated bed - Remove of washers and usage of Springs
-
- Posts: 132
- Joined: Sat Jul 20, 2013 12:50 pm
- Location: Würzburg
Heated bed - Remove of washers and usage of Springs
Last edited by Bachgassenbande on Tue Sep 10, 2013 4:15 pm, edited 1 time in total.
Felix 2.0
E3D Kraken Hotend
3mm Glas bed
LED light bar upgrade
E3D Kraken Hotend
3mm Glas bed
LED light bar upgrade
Thanks for that as I'm having the same problem and had just ordered some springs to do the same thing. I don't know if they are the same specs as yours though, will see how they go once they arrive.
Stephen...
Felix 2.0 -> Felix 3.0 dual
Simplify3D Slicer, Kisslicer
Have you added your Felix to the Map? http://goo.gl/maps/HajnZ
http://blog.strobotics.com.au
Felix 2.0 -> Felix 3.0 dual
Simplify3D Slicer, Kisslicer
Have you added your Felix to the Map? http://goo.gl/maps/HajnZ
http://blog.strobotics.com.au
Hi,Bachgassenbande wrote:Just had issues with the washers and nuts falling off during printing,
so I removed the washers and crincled washeres and installed stiff springs.
Running right now for one week with these improvement and had good experience according printing and leveling the bed.
Springs are operational from -40°C to 200°C
See data sheet enclosed
Pictures of tweak are following
If someone wants to have some springs I still have a bunch of them send me a PM
Wher did you buy them?
BR,
Magnus
-
- Posts: 132
- Joined: Sat Jul 20, 2013 12:50 pm
- Location: Würzburg
My firm ordered these parts for protypes,
just laying around as we found out that we need diffrent springs.
I asked if I can have some of them to use them (so got 100)
I will not sell them, just donate
Ordered from: Reiber Fabrik für Präzesionsfedern
Lowest quanity 2000 parts
just laying around as we found out that we need diffrent springs.
I asked if I can have some of them to use them (so got 100)
I will not sell them, just donate
Ordered from: Reiber Fabrik für Präzesionsfedern
Lowest quanity 2000 parts

Felix 2.0
E3D Kraken Hotend
3mm Glas bed
LED light bar upgrade
E3D Kraken Hotend
3mm Glas bed
LED light bar upgrade
I'm new here and PM doesn't work yet, can you email me at sm4rwi(at)gmail.com?Bachgassenbande wrote:My firm ordered these parts for protypes,
just laying around as we found out that we need diffrent springs.
I asked if I can have some of them to use them (so got 100)
I will not sell them, just donate
Ordered from: Reiber Fabrik für Präzesionsfedern
Lowest quanity 2000 parts
Last edited by ham2 on Sun Sep 01, 2013 1:33 pm, edited 2 times in total.
-
- Posts: 132
- Joined: Sat Jul 20, 2013 12:50 pm
- Location: Würzburg
At least this would be nice.
Depends really where to send these springs.
Maybe some of you can take some countries (so I send some more...) and spread them there if requested.....
Depends really where to send these springs.
Maybe some of you can take some countries (so I send some more...) and spread them there if requested.....
Felix 2.0
E3D Kraken Hotend
3mm Glas bed
LED light bar upgrade
E3D Kraken Hotend
3mm Glas bed
LED light bar upgrade
I'm in Ghent, Belgium. I can take care of Benelux, since I have a post office below my appartment if you want! But who wants more?
The one who sends needs to buy at least a bubblewrap envelope of sorts and post them I think it is about 3 to 5 euros. (?)
The one who sends needs to buy at least a bubblewrap envelope of sorts and post them I think it is about 3 to 5 euros. (?)
Felix 2.0