Felix 2.0 LCD display Fr Value

This is for general discussions. Also FAQ can be found here.

Moderator: speedake95

Post Reply
Bachgassenbande
Posts: 132
Joined: Sat Jul 20, 2013 12:50 pm
Location: Würzburg

Felix 2.0 LCD display Fr Value

Post by Bachgassenbande »

Can somebody tell me if the FR 0-100% is corresponding to the speed the Felixprinter is printing?
Can't find an answer in the manual right now.

Seems for me i can directly influence the speed of the prints by tweakink these value.
Felix 2.0
E3D Kraken Hotend
3mm Glas bed
LED light bar upgrade

Kjetilei
Posts: 334
Joined: Fri Mar 16, 2012 8:26 pm
Location: Stavanger, Norway

Post by Kjetilei »

FR=Feed rate, and can be more than 100% too.

FR below 100% = slower print speed and above 100% = faster.

Bachgassenbande
Posts: 132
Joined: Sat Jul 20, 2013 12:50 pm
Location: Würzburg

Post by Bachgassenbande »

thx
Felix 2.0
E3D Kraken Hotend
3mm Glas bed
LED light bar upgrade

Post Reply