Axels goes wrong direction

Post Reply
Posts: 3
Joined: Tue Oct 22, 2013 7:58 am

Axels goes wrong direction

Post by chevyman »

Here is 2 Felix 2.0 printers what I have just assebled.

First one X-axis goes wrog direction
Second one X- and Y-axis goes wrong direction.

I have changed optosensors at least 3 times, no help.

What to do?

Posts: 132
Joined: Sat Jul 20, 2013 12:50 pm
Location: Würzburg

Post by Bachgassenbande »

If you axes are dirceting in the wrong direction I would assume that someting wring with the nema 17 motor cabeling not the optosensors
Felix 2.0
E3D Kraken Hotend
3mm Glas bed
LED light bar upgrade

Posts: 88
Joined: Thu Aug 08, 2013 10:01 am
Location: Queensland, Australia

Post by Capella_Ben »

Or the opto sensors keep blowing because they have too much voltage. Measure the voltage to them. they need 5V.

Felix 3.0 (upgraded from 2.0)

Post Reply

Return to “Troubleshooting”