Latest Software/firmware for Felix 1.0

Discussions about firmware/slicing software, tweaks and settings
Post Reply
takka
Posts: 2
Joined: Mon Oct 08, 2012 4:49 am

Re: Latest Software/firmware for Felix 1.0

Post by takka »

But there is no need to re-install if code is removed? Are there any other changes to the program?
Top
aikx
Posts: 45
Joined: Sun May 13, 2012 1:14 pm
Location: Cologne, Germany

Post by aikx »

Guillaume, please support Download of the new slicing profiles (integrated in RepetierHost v0.83) for macs!
Top
Mayhem
Posts: 169
Joined: Tue Jan 08, 2013 4:15 pm
Location: Finland

Post by Mayhem »

New version for repertierhost is released, you can download it from the downloads section.
Felix 2.0----> 3.0
V4 hot end
Simplyfy 3D
Kisslicer
Autodesk fusion 360
Top
frankjoke
Posts: 150
Joined: Sat Dec 28, 2013 6:07 pm

Post by frankjoke »

Just a quick update: There is also a new Slic3r 1.1.7.
You can download it and copy them just above the new repetir host slic3r files (in my case @ C:\Program Files\Repetier-Host-FELIXPrinters\Slic3r).
Anyhow, very nice update!
Top
kerog
Posts: 117
Joined: Mon Jun 09, 2014 1:54 am

Post by kerog »

How do you install the new version on a Mac?
Top
frankjoke
Posts: 150
Joined: Sat Dec 28, 2013 6:07 pm

Post by frankjoke »

Did anybody try the 0.92 firmware from October 28th? 0.92 did not work for me so far at all and therefore I am careful.
Top
frankjoke
Posts: 150
Joined: Sat Dec 28, 2013 6:07 pm

Post by frankjoke »

Printed first project with new 0.92 from yesterday (November 11th)!
Ok, finally I leave it on new FW :)
Top
Post Reply

Return to “Software/Firmware”