FELIX 3.0

This is for general discussions. Also FAQ can be found here.

Moderator: speedake95

Post Reply
Mayhem
Posts: 169
Joined: Tue Jan 08, 2013 4:15 pm
Location: Finland

FELIX 3.0

Post by Mayhem »

http://shop.felixprinters.com/product-c ... oFZg_nxr_c

Optional dual extrusion. Print your objects with two colors or with special water soluble support material. NICE :)
Look like the 3.0 has injection molded parts, good no more printing spares.
Although i have most of the parts printed in abs so i havent printed spares in a logn time :)
Finally we have removable hot end tips, heater and thermistor are hold in place whit set screws, no more silicon :)
Felix 2.0----> 3.0
V4 hot end
Simplyfy 3D
Kisslicer
Autodesk fusion 360

suraki
Posts: 27
Joined: Fri Aug 03, 2012 6:47 pm
Location: Hungary

Post by suraki »

time to upgrade my 1.0 to dual extrusion 3.0 :-)

twicx
Posts: 105
Joined: Fri Jan 11, 2013 1:26 pm

Post by twicx »

hmmm. Very tempting indeed. For me, it'll be a decision between upgrading to 2.0 and going with a 3rd party dual extruder, or just going to 3.0. The deciding factors will be price, and whether I can use the 3.0 dual extruders with the 1.5 Ramps board.

t800
Posts: 24
Joined: Sat May 11, 2013 10:28 am

Post by t800 »

I already own a 2.0 Felix.
I'm deffinatly going to upgrade to dual extruder 3.0 when upgrade kits become available. Almost can't wait....

Bachgassenbande
Posts: 132
Joined: Sat Jul 20, 2013 12:50 pm
Location: Würzburg

Post by Bachgassenbande »

Hopefully the Upgrade kits are comming soon;
Really need the injection molded parts as the original ones are starting to fall apart and I'm not willing to print spares as I'm anyways upgrading to 3.0 and have to pai for it.
Felix 2.0
E3D Kraken Hotend
3mm Glas bed
LED light bar upgrade

Mayhem
Posts: 169
Joined: Tue Jan 08, 2013 4:15 pm
Location: Finland

Post by Mayhem »

Felix 3.0 in action :)
http://youtu.be/0bHWLebPZ-Q
Felix 2.0----> 3.0
V4 hot end
Simplyfy 3D
Kisslicer
Autodesk fusion 360

aikx
Posts: 45
Joined: Sun May 13, 2012 1:14 pm
Location: Cologne, Germany

Post by aikx »

FElix 3 by heise.de Euromold (german): http://www.heise.de/newsticker/meldung/ ... 60229.html

Mayhem
Posts: 169
Joined: Tue Jan 08, 2013 4:15 pm
Location: Finland

Post by Mayhem »

Guillaume when you are planning to release the files for the new parts?
Felix 2.0----> 3.0
V4 hot end
Simplyfy 3D
Kisslicer
Autodesk fusion 360

Bachgassenbande
Posts: 132
Joined: Sat Jul 20, 2013 12:50 pm
Location: Würzburg

Post by Bachgassenbande »

I'm not sure if he will.
As the parts are injection molded. Don't know if they need to be optimized to be printable on the Felix.

There is no benefit besides the new Extruder/HotEnd design for the users.

So +1 for the upload of the new Design to the download section :D
Felix 2.0
E3D Kraken Hotend
3mm Glas bed
LED light bar upgrade

Mayhem
Posts: 169
Joined: Tue Jan 08, 2013 4:15 pm
Location: Finland

Post by Mayhem »

if i remember correctly i did see post somewhere where he mention that the new parts will be available for printing as well, or i could be totally wrong :)

Reason for this is that id like to test the dual extruder since i have all the electronics/parts required for the dual extruder.
Felix 2.0----> 3.0
V4 hot end
Simplyfy 3D
Kisslicer
Autodesk fusion 360

Post Reply