Dual head repetier host firemwar for Felix 3.0 now awailable

Discussions about firmware/slicing software, tweaks and settings
Post Reply
Bachgassenbande
Posts: 132
Joined: Sat Jul 20, 2013 12:50 pm
Location: Würzburg

Dual head repetier host firemwar for Felix 3.0 now awailable

Post by Bachgassenbande »

Felix 2.0
E3D Kraken Hotend
3mm Glas bed
LED light bar upgrade

dsnijders
Posts: 30
Joined: Fri Jul 26, 2013 4:13 pm

Post by dsnijders »

Did you try it? How does repetier firmware compare to marlin?
I have a Felix 2.0 with the 2.0 electronics board, but assume that is compatible with repetier firmware.

Makron
Posts: 110
Joined: Wed Mar 20, 2013 1:29 pm

Post by Makron »

I would like to know this to , in the 3.0 manual you see a 2.1 board.

Mayhem
Posts: 169
Joined: Tue Jan 08, 2013 4:15 pm
Location: Finland

Post by Mayhem »

I did that but it gave me somekind of error pointing to the extruder so i installed
Old firmware back.
Felix 2.0----> 3.0
V4 hot end
Simplyfy 3D
Kisslicer
Autodesk fusion 360

Post Reply