Saamec,
thanks for the tips but this seems to be for SFACT!
Will try, but could not manage dual extruder support (PLA+PVA) on second extruder with SFACT and therefore I had to use Kisslicer and I don't know if it can handle this as well.
Felix 3.0 Dual - Slizer setting shown in manual not availabl
OFF TOP. GOOGLE, EBAYmccube wrote:Привет, Любые предложения о том, где я должен купить ПВА нити?
New hotend -- http://forum.felixprinters.com/viewtopic.php?f=9&t=729
Hi mccube,
In terms of PVA filament I would suggest one place to look is at http://www.plastic2print.com. Please note we are not in any way affiliated with Plastic2Print, we just get good service, fast delivery, coupled with reasonable with prices.
Although our latest purchase last week was for HIPS filament (also dissolvable) we noticed the PVA prices looked reasonable.
Failing that, as Saamec has already said Google away.
Cheers,
Marc
In terms of PVA filament I would suggest one place to look is at http://www.plastic2print.com. Please note we are not in any way affiliated with Plastic2Print, we just get good service, fast delivery, coupled with reasonable with prices.
Although our latest purchase last week was for HIPS filament (also dissolvable) we noticed the PVA prices looked reasonable.
Failing that, as Saamec has already said Google away.
Cheers,
Marc
Felix 3.0 Dual Head * E3D Titan V6 * Repetier-Host V2.1.3 * Repetier-Firmware 0.92.9 (01/08/17 - Modified) * KISSlicer Pro - 1.6.3 * Arduino 1.8.5 *
Slowly I am getting along with the printer!
I learned to tweak material and print settings in Kisslicer (who is the only one which generates predictable results for single and dual).
I created diferent printer presets for single and dual printing (with PVA or only dual color).
I also realized that I have PLA from different vendors which need different temperatures and retracting
. Best is to test new PLY and check with some very small prints (3 layers) if settings are OK.
Dear Admin! Why are you displaying pictures without right orientation! p.s.: I gave up on Kapton, use only inkjet transparencies any more! Much easier to put onto the bed and sticks better than anything else without hairspray or other tools. I use also my self written post processor to automatically reduce bed temperature on 3rd layer to 40 degrees ...
I learned to tweak material and print settings in Kisslicer (who is the only one which generates predictable results for single and dual).
I created diferent printer presets for single and dual printing (with PVA or only dual color).
I also realized that I have PLA from different vendors which need different temperatures and retracting

Dear Admin! Why are you displaying pictures without right orientation! p.s.: I gave up on Kapton, use only inkjet transparencies any more! Much easier to put onto the bed and sticks better than anything else without hairspray or other tools. I use also my self written post processor to automatically reduce bed temperature on 3rd layer to 40 degrees ...
Hi all,
I am a newbie and having trouble to print a simple dual color model with my Felix 3.0 dual extruder (using PLA material). Can anyone share with me tips on a printing a dual color model? Would be really grateful if anyone could send me the STL file of the dual color print model, the printer and software settings/configuration, materials used, etc.
Thanks in advance.
Best regards,
mccube
I am a newbie and having trouble to print a simple dual color model with my Felix 3.0 dual extruder (using PLA material). Can anyone share with me tips on a printing a dual color model? Would be really grateful if anyone could send me the STL file of the dual color print model, the printer and software settings/configuration, materials used, etc.
Thanks in advance.
Best regards,
mccube
I bought them @Amazon:http://www.amazon.de/gp/product/B0002S4CRM
Look for same company and full sheet clear label on your amazon.
Look for same company and full sheet clear label on your amazon.