Hello,
Can someone help me for Kisslicer V.1.1.0.14 settings for Felix 3.0 dual-head or post ini files.
I am using PLA 1.75mm ordered from this website.
When I print (test_thinwall_v3_export.gcode) with Repetiter-Host for FelixPrinter V90c and Felix 3.0 running on firmware repetier 0.91 everything works fine.
But when I'm loading STL files and process it with Kisslicer the printer won't give inough PLA output to print correctly.
Kisslicer V.1.1.0.14
Have you tried the sample Kisslicer ini files posted in the download section here? I find that they made a good starting point for good quality prints.
__________________________________________
Andy Silverman, Technogeek in Seattle
Felix Tec4 Single-head
Andy Silverman, Technogeek in Seattle
Felix Tec4 Single-head
I use the following:
By the way, my version of Kisslicer is 1.2.01 from June 2013, upgrade yours!
p.s.: I use also some postprocessing, just remove this settings or install what I posted on other section.
I created two printers, duo and single. The reason is that single can use bigger bed and it's simpler and easier to configure.By the way, my version of Kisslicer is 1.2.01 from June 2013, upgrade yours!
p.s.: I use also some postprocessing, just remove this settings or install what I posted on other section.
Where did you get this 1.2.01 from? Is this the Pro/paid version? On Kisslicer.com, the versions available for download are all still labeled as 1.1.
__________________________________________
Andy Silverman, Technogeek in Seattle
Felix Tec4 Single-head
Andy Silverman, Technogeek in Seattle
Felix Tec4 Single-head
Hi Andy
With the forum no longer functioning at the KISSlicer website a group of user have set up an independent forum at: https://groups.google.com/forum/#!forum ... fugee-camp
Once you get accepted as a member you will find threads in which senior KISSlicer beta testers have released their latest release of KISSlicer (for various operating platforms).
Please note that 1.2.0.1 is a beta release. Having said that I have had no issues to date in using this release (Pro Version for Windows 64), furthermore it has numerous bug fixes and boasts several useful enhancements.
Cheers,
Marc
With the forum no longer functioning at the KISSlicer website a group of user have set up an independent forum at: https://groups.google.com/forum/#!forum ... fugee-camp
Once you get accepted as a member you will find threads in which senior KISSlicer beta testers have released their latest release of KISSlicer (for various operating platforms).
Please note that 1.2.0.1 is a beta release. Having said that I have had no issues to date in using this release (Pro Version for Windows 64), furthermore it has numerous bug fixes and boasts several useful enhancements.
Cheers,
Marc
Felix 3.0 Dual Head * E3D Titan V6 * Repetier-Host V2.1.3 * Repetier-Firmware 0.92.9 (01/08/17 - Modified) * KISSlicer Pro - 1.6.3 * Arduino 1.8.5 *
-
- Posts: 132
- Joined: Sat Jul 20, 2013 12:50 pm
- Location: Würzburg
So what's the main upgrades?
Real multi nozzle support?
AMF or multi SLT support?
Real multi nozzle support?
AMF or multi SLT support?
Felix 2.0
E3D Kraken Hotend
3mm Glas bed
LED light bar upgrade
E3D Kraken Hotend
3mm Glas bed
LED light bar upgrade
Hi Bachgassenbande,
In answer to your question no not entirely. Current changes/fixes listed by Jonathan Wong (Beta tester) include:
- fixed 0 wipe and pillar raft
- clears paths on transform
- segregates sub meshes
- changed wipe checkbox text
- flips triangles
- sub mesh slicing progressing
- seam angle
- preliminary sub-mesh overlap
- fixed some bugs
- can load multiple STLs into a single model
- label all model names
- fixed multi-STL bug
- transform keeps main groups
- fixed a mix up when the triangles were reordered
From a personal standpoint improvements to the seam overlap, jitter, seam angle, and slice paths in general are a welcomed improvement. Also you can import merged STL, however development has stopped short of providing full multi extruder functionality which effectively nullifies the STL import function.
Cheers,
Marc
In answer to your question no not entirely. Current changes/fixes listed by Jonathan Wong (Beta tester) include:
- fixed 0 wipe and pillar raft
- clears paths on transform
- segregates sub meshes
- changed wipe checkbox text
- flips triangles
- sub mesh slicing progressing
- seam angle
- preliminary sub-mesh overlap
- fixed some bugs
- can load multiple STLs into a single model
- label all model names
- fixed multi-STL bug
- transform keeps main groups
- fixed a mix up when the triangles were reordered
From a personal standpoint improvements to the seam overlap, jitter, seam angle, and slice paths in general are a welcomed improvement. Also you can import merged STL, however development has stopped short of providing full multi extruder functionality which effectively nullifies the STL import function.
Cheers,
Marc
Felix 3.0 Dual Head * E3D Titan V6 * Repetier-Host V2.1.3 * Repetier-Firmware 0.92.9 (01/08/17 - Modified) * KISSlicer Pro - 1.6.3 * Arduino 1.8.5 *
Oh Yes, I use Pro version, was really worth the money for dual extruder and printing nicer than other free versions. Slic3r is OK too but prints are different and movements are not so in sequence, and it's harder to handle because the interface is not showing so many details.
p.s.: I could use 1.2 for 64bit Windows also before I bought Pro!
p.s.: I could use 1.2 for 64bit Windows also before I bought Pro!