The whole head construction is a bit weak and would need some rework.
If Felix would provide us with some (s)cad files of the holders we could try to improve.
- The head without the screw!
Head lost Ventilator screw within print
Head lost Ventilator screw within print
My Felix 3.0 Dual head was printing and the right head's ventilator lost a screw, luckily it fell off the bed and did not crash between head bed and head or print!
The whole head construction is a bit weak and would need some rework.
If Felix would provide us with some (s)cad files of the holders we could try to improve.
By the way, I already lost once one fan together with it's air channel as well and it was hanging down on the cable and destroying print
The whole head construction is a bit weak and would need some rework.
If Felix would provide us with some (s)cad files of the holders we could try to improve.
By the way, I already lost once one fan together with it's air channel as well and it was hanging down on the cable and destroying print