Simplify3D Software

Discussions about firmware/slicing software, tweaks and settings
Post Reply
Mayhem
Posts: 169
Joined: Tue Jan 08, 2013 4:15 pm
Location: Finland

Re: Simplify3D Software

Post by Mayhem »

Just downloaded simplify3d and it dosent connect to my felix.
it says: WARNING: framing error detected by hardware?
Any ideas what is causing that error.
Felix 2.0----> 3.0
V4 hot end
Simplyfy 3D
Kisslicer
Autodesk fusion 360

Saamec
Posts: 157
Joined: Fri Jun 21, 2013 9:28 am

Post by Saamec »

free downloaded? you changed something in the firmware? generally developers slicer Felix pointed in the list of supported devices.

Mayhem
Posts: 169
Joined: Tue Jan 08, 2013 4:15 pm
Location: Finland

Post by Mayhem »

Not free, ordered it from them.
i didint change anything in the firmware.
Those that have it working what firmware are you using? I have felix 2.0 marlin, i tried the repetier firmware but same error.
Felix 2.0----> 3.0
V4 hot end
Simplyfy 3D
Kisslicer
Autodesk fusion 360

Saamec
Posts: 157
Joined: Fri Jun 21, 2013 9:28 am

Post by Saamec »

repetier... use. I was just going to buy too, and then you write this. So he does not print? I think there is a meaning to write. The program costs $ 140 and it very much. Let solve the issue may need some sort of patch.

Mayhem
Posts: 169
Joined: Tue Jan 08, 2013 4:15 pm
Location: Finland

Post by Mayhem »

Solved, i had to change the baud rate to 250000.
Felix 2.0----> 3.0
V4 hot end
Simplyfy 3D
Kisslicer
Autodesk fusion 360

Saamec
Posts: 157
Joined: Fri Jun 21, 2013 9:28 am

Post by Saamec »

)))))))))))))))))))

packman
Posts: 8
Joined: Sat Sep 22, 2012 2:02 am
Location: Cedar Grove, New Jersey, USA
Contact:

Post by packman »

Hi All, I have been using Simply 3D with the provided Felix Printer set up. I have had numerous extruder head clogs. I do not encounter this with KISSlicer or SFACT. Any suggestions as to what settings I may have need to change?

felix GH
Posts: 6
Joined: Sat Nov 09, 2013 4:44 pm

Post by felix GH »

I really don't think that Simplify3D is any better than the rest if all configured correct,
maybe the default settings are better optimized at the beginning. Ok the support is a niffty feature but
the outside perimeter are all settings and the printers ability to follow and non oozing filament etc.
For me to pay $140 for a delveloment slicer is a no no ( no try no buy ).

For example Android gcodePrintr, tried free, liked and paid for full.

kiteboarder
Posts: 18
Joined: Wed May 21, 2014 9:38 pm

Post by kiteboarder »

Hi,

Is anyone able to help me, I've just purchased Simplify3D and installed it on my Mac, connected my Felix 3.0 and selected the Felix 3.0 profile, however its not finding my printer.

seaton
Posts: 291
Joined: Tue May 14, 2013 9:04 am
Location: Bunbury, Western Australia
Contact:

Post by seaton »

you need to change the baudrate to 115200 on both your printer and Simplify. For whatever reason Simplify for OSX does not support the faster baud rate.
Stephen...

Felix 2.0 -> Felix 3.0 dual
Simplify3D Slicer, Kisslicer
Have you added your Felix to the Map? http://goo.gl/maps/HajnZ

http://blog.strobotics.com.au

Post Reply