Simplify3D Software

Discussions about firmware/slicing software, tweaks and settings
Post Reply
kiteboarder
Posts: 18
Joined: Wed May 21, 2014 9:38 pm

Re: Simplify3D Software

Post by kiteboarder »

How do i change the Baudrate on the printer Seaton?
seaton wrote:you need to change the baudrate to 115200 on both your printer and Simplify. For whatever reason Simplify for OSX does not support the faster baud rate.

Dreide
Posts: 176
Joined: Sun Sep 29, 2013 12:32 am
Location: Lausanne, Switzerland

Post by Dreide »

kiteboarder wrote:How do i change the Baudrate on the printer Seaton?
You have an LCD? Then go to Configuration -> General -> Baudrate.
Felix 2.0->3.0dual * Repetier (host+firmware) * KISSlicer Pro, Simplify3D * Cubify Design

kiteboarder
Posts: 18
Joined: Wed May 21, 2014 9:38 pm

Post by kiteboarder »

Yeah i have a LCD screen but not got them settings.

If i turn the knob i just get temp info etc, if i then push the knob in i get some menus

Quick Settings
Position
Extruder
Fan Speed
SD Card
Debugging

Ive gone into each of them menus and nothing.

Dreide
Posts: 176
Joined: Sun Sep 29, 2013 12:32 am
Location: Lausanne, Switzerland

Post by Dreide »

It should be the last menu, the next after Debugging. But I have a newer firmware installed, so maybe I should keep my mouth shut.
Felix 2.0->3.0dual * Repetier (host+firmware) * KISSlicer Pro, Simplify3D * Cubify Design

DBL
Posts: 4
Joined: Tue Apr 08, 2014 9:04 am

Post by DBL »

kiteboarder wrote:Yeah i have a LCD screen but not got them settings.

If i turn the knob i just get temp info etc, if i then push the knob in i get some menus

Quick Settings
Position
Extruder
Fan Speed
SD Card
Debugging

Ive gone into each of them menus and nothing.
I had same problem in the past.

I have observed that sometimes the Configuration Menu (below Debugging) does not show up. Try to insert a SD-card in the printer and check again. An other solution, connect the printer to the repetier host software and check again if the menu show up.
Felix 3.0 Dual downgraded to Single with E3D V6

kiteboarder
Posts: 18
Joined: Wed May 21, 2014 9:38 pm

Post by kiteboarder »

DBL thanks for that, put a sd card in and its shown up now, thank you. :) think thats maybe a bit of a bug? :)

Legion 2.3
Posts: 84
Joined: Sun Apr 20, 2014 6:23 pm

Post by Legion 2.3 »

I bought Simplify3d a few days ago and did some nice prints with it, so i started to print with 2 extruders. The first print was successful, but ONLY the first print.

Now, everytime i use multiple processes, the G-Code is buggy: If i have 2 STLs of 1 object and assign the 2 processes to the two STLs (1 for each), the first 2 layers print as expected, but then, the whole of the next layers are printed with the same extruder (ex0 or ex1). Even if i seperate the 2 STLs from each other (they´re not touching in the preview), the same happens.

Another strange thing is: Even if I assing both processes to extruder 0, only the first 2 layers are printed with this extruder, the next ones are printed with ex1. The only workarround is to delete the 2nd extruder, but then, I can´t print with 2 materials.

I´m currently using a customized .fff - profile with some additional G-code for the beginning and the end of the print, but nothing for the tool-change.
I´ve already tried the predefined Felix 3.0 single - profile and just changed the extruder toolhead index for the 2nd process to 1, but it´s not any better.

I´ve already tried this with other STLs.

S3d just seems to "forget" to include the tool change code in the G-code or randomly adds this code.

As mentioned above, it worked one time.

Any ideas?

Here´s a part of the G-Code (The entire code is too large to post)

Code: Select all

; G-Code generated by Simplify3D(TM) Version 2.1.0
; Jun 13, 2014 at 7:01:53 
G90 ; use absolute coordinates
M82 ; absolute extrusion distances
G21 ; set units to millimeters
M106 S0
M140 S55
M190 S55
M104 S200 T0
M109 S200 T0
G28 ; home all axes
G1 Z5 F5000;
G92 E0
G1 E-1 F1800
G0 Z0.48 F1000
; layer 1, Z = 0.08
T0
; tool H-1 W-1
M106 S0
T0
; tool H0.2 W0.42
G0 X99.257 Y77.527 F7800
G0 Z0.08 F1000
G1 E0 F540
G92 E0
G1 X100.723 Y75.674 E0.0825 F2100
G1 X102.463 Y74.096 E0.1646
G1 X103.951 Y73.141 E0.2263
G1 X104.144 Y72.862 E0.2381
G1 X105.482 Y71.496 E0.3049
G1 X107.013 Y70.4 E0.3707
G1 X108.667 Y69.585 E0.4351
G1 X110.487 Y69.039 E0.5014
G1 X112.39 Y68.816 E0.5683
G1 X114.254 Y68.916 E0.6335
G1 X116.084 Y69.318 E0.699
G1 X117.85 Y70.042 E0.7656
G1 X118.634 Y70.533 E0.7979
G1 X121.342 Y70.529 E0.8925
G1 X121.369 Y70.53 E0.8934
G1 X122.102 Y70.066 E0.9237
G1 X123.864 Y69.334 E0.9904
G1 X125.682 Y68.925 E1.0554
G1 X127.509 Y68.815 E1.1194
G1 X129.426 Y69.019 E1.1867
G1 X131.265 Y69.561 E1.2537
G1 X132.947 Y70.373 E1.3189
G1 X134.493 Y71.479 E1.3853
G1 X135.801 Y72.802 E1.4502
G1 X136.034 Y73.132 E1.4643
G1 X137.526 Y74.088 E1.5262
G1 X139.275 Y75.671 E1.6086
G1 X140.729 Y77.513 E1.6906
G1 X141.857 Y79.564 E1.7723
G1 X142.558 Y81.565 E1.8463
G1 X143.121 Y84.081 E1.9364
G1 X143.491 Y86.402 E2.0185
G1 X143.712 Y88.73 E2.1001
G1 X143.785 Y91.049 E2.1812
G1 X143.713 Y93.408 E2.2636
G1 X143.493 Y95.731 E2.3451
G1 X143.13 Y98.02 E2.426
G1 X142.561 Y100.57 E2.5172
G1 X141.872 Y102.552 E2.5905
G1 X140.738 Y104.621 E2.6729
G1 X139.285 Y106.467 E2.755
G1 X137.537 Y108.052 E2.8374
G1 X136.039 Y109.014 E2.8995
G1 X135.834 Y109.306 E2.912
G1 X134.532 Y110.636 E2.977
G1 X132.993 Y111.748 E3.0433
G1 X131.324 Y112.563 E3.1082
G1 X129.516 Y113.11 E3.1741
G1 X127.605 Y113.331 E3.2414
G1 X125.746 Y113.233 E3.3063
G1 X123.914 Y112.83 E3.3719
G1 X122.149 Y112.106 E3.4385
G1 X121.364 Y111.615 E3.4708
G1 X118.656 Y111.619 E3.5654
G1 X118.629 Y111.618 E3.5664
G1 X117.896 Y112.082 E3.5966
G1 X116.135 Y112.814 E3.6632
G1 X114.317 Y113.223 E3.7283
G1 X112.483 Y113.333 E3.7925
G1 X110.58 Y113.129 E3.8593
G1 X108.729 Y112.588 E3.9267
G1 X107.059 Y111.776 E3.9915
G1 X105.521 Y110.684 E4.0574
G1 X104.177 Y109.326 E4.1241
G1 X103.957 Y109.01 E4.1376
G1 X102.474 Y108.061 E4.1991
G1 X100.732 Y106.484 E4.2811
G1 X99.267 Y104.635 E4.3635
G1 X98.139 Y102.573 E4.4456
G1 X97.444 Y100.588 E4.519
G1 X96.878 Y98.072 E4.6091
G1 X96.506 Y95.741 E4.6915
G1 X96.288 Y93.413 E4.7732
G1 X96.215 Y91.097 E4.8541
G1 X96.287 Y88.745 E4.9363
G1 X96.505 Y86.423 E5.0177
G1 X96.869 Y84.123 E5.0991
G1 X97.441 Y81.574 E5.1903
G1 X98.125 Y79.607 E5.263
G1 X99.257 Y77.527 E5.3457
G0 X99.609 Y77.759 F7800
G92 E0
G1 X101.03 Y75.962 E0.08 F2100
G1 X102.72 Y74.43 E0.1597
G1 X104.248 Y73.449 E0.2231
G1 X104.469 Y73.131 E0.2366
G1 X105.757 Y71.816 E0.3009
G1 X107.23 Y70.761 E0.3642
G1 X108.822 Y69.977 E0.4261
G1 X110.573 Y69.452 E0.49
G1 X112.403 Y69.238 E0.5543
G1 X114.198 Y69.333 E0.6171
G1 X115.959 Y69.721 E0.6801
G1 X117.657 Y70.417 E0.7442
G1 X118.513 Y70.954 E0.7795
G1 X121.334 Y70.949 E0.878
G1 X121.484 Y70.955 E0.8832
G1 X122.297 Y70.44 E0.9168
G1 X123.992 Y69.736 E0.9809
G1 X125.741 Y69.342 E1.0435
G1 X127.5 Y69.237 E1.105
G1 X129.343 Y69.432 E1.1698
G1 X131.114 Y69.954 E1.2343
G1 X132.732 Y70.735 E1.297
G1 X134.219 Y71.8 E1.3609
G1 X135.478 Y73.073 E1.4234
G1 X135.739 Y73.441 E1.4392
G1 X137.27 Y74.422 E1.5027
G1 X138.967 Y75.959 E1.5826
G1 X140.378 Y77.746 E1.6622
G1 X141.472 Y79.736 E1.7414
G1 X142.153 Y81.681 E1.8134
G1 X142.708 Y84.16 E1.9022
G1 X143.074 Y86.455 E1.9833
G1 X143.293 Y88.756 E2.064
G1 X143.365 Y91.05 E2.1442
G1 X143.293 Y93.382 E2.2257
G1 X143.076 Y95.678 E2.3062
G1 X142.717 Y97.942 E2.3862
G1 X142.156 Y100.455 E2.4762
G1 X141.486 Y102.381 E2.5474
G1 X140.387 Y104.389 E2.6273
G1 X138.977 Y106.18 E2.7069
G1 X137.281 Y107.718 E2.7869
G1 X135.743 Y108.705 E2.8507
G1 X135.51 Y109.037 E2.8649
G1 X134.257 Y110.317 E2.9274
G1 X132.776 Y111.387 E2.9912
G1 X131.17 Y112.171 E3.0536
G1 X129.431 Y112.697 E3.1171
G1 X127.591 Y112.91 E3.1818
G1 X125.803 Y112.816 E3.2443
G1 X124.04 Y112.428 E3.3074
G1 X122.342 Y111.731 E3.3715
G1 X121.485 Y111.195 E3.4068
G1 X118.664 Y111.199 E3.5053
G1 X118.514 Y111.193 E3.5105
G1 X117.702 Y111.707 E3.5441
G1 X116.007 Y112.412 E3.6082
G1 X114.257 Y112.806 E3.6708
G1 X112.493 Y112.912 E3.7326
G1 X110.662 Y112.715 E3.7969
G1 X108.881 Y112.195 E3.8617
G1 X107.273 Y111.413 E3.9241
G1 X105.793 Y110.363 E3.9875
G1 X104.501 Y109.056 E4.0517
G1 X104.253 Y108.702 E4.0668
G1 X102.73 Y107.726 E4.1299
G1 X101.04 Y106.196 E4.2096
G1 X99.618 Y104.402 E4.2895
G1 X98.524 Y102.402 E4.3691
G1 X97.848 Y100.472 E4.4405
G1 X97.291 Y97.993 E4.5292
G1 X96.923 Y95.688 E4.6108
G1 X96.707 Y93.387 E4.6915
G1 X96.635 Y91.097 E4.7715
G1 X96.706 Y88.771 E4.8528
G1 X96.921 Y86.475 E4.9333
G1 X97.282 Y84.202 E5.0137
G1 X97.845 Y81.689 E5.1036
G1 X98.51 Y79.777 E5.1743
G1 X99.609 Y77.759 E5.2545
G92 E0
G1 E-1 F1800
G0 Z0.48 F1000
G0 X121.152 Y81.21 F7800
G0 Z0.08 F1000
G1 E0 F1800
G92 E0
G1 X123.473 Y81.296 E0.0811 F1400
G1 X125.65 Y81.447 E0.1573
G1 X126.089 Y81.277 E0.1738
G1 X126.38 Y81.478 E0.1861
G1 X126.717 Y81.566 E0.1983
G1 X127.465 Y81.651 E0.2246
G1 X127.861 Y81.612 E0.2385
G1 X128.077 Y81.505 E0.2469
G1 X128.141 Y81.574 E0.2502
G1 X128.545 Y81.789 E0.2662
G1 X129.413 Y81.924 E0.2968
G1 X130.005 Y82.067 E0.3181
G1 X130.538 Y82.295 E0.3384
G1 X131.017 Y82.601 E0.3582
G1 X131.445 Y82.989 E0.3784
G1 X131.798 Y83.435 E0.3982
G1 X132.071 Y83.932 E0.418
G1 X132.272 Y84.506 E0.4393
G1 X132.626 Y86.09 E0.496
G1 X132.891 Y87.75 E0.5547
G1 X133.048 Y89.405 E0.6127
G1 X133.1 Y91.054 E0.6703
G1 X133.048 Y92.739 E0.7292
G1 X132.892 Y94.389 E0.7871
G1 X132.633 Y96.02 E0.8448
G1 X132.271 Y97.643 E0.9029
G1 X132.077 Y98.203 E0.9235
G1 X131.798 Y98.712 E0.9438
G1 X131.448 Y99.157 E0.9636
G1 X131.02 Y99.545 E0.9837
G1 X130.539 Y99.853 E1.0037
G1 X130.018 Y100.076 E1.0235
G1 X129.414 Y100.224 E1.0452
G1 X128.614 Y100.345 E1.0735
G1 X128.155 Y100.554 E1.0911
G1 X128.09 Y100.626 E1.0945
G1 X127.718 Y100.511 E1.1081
G1 X127.409 Y100.503 E1.1189
G1 X126.545 Y100.606 E1.1493
G1 X126.076 Y100.857 E1.1678
G1 X125.618 Y100.701 E1.1847
G1 X123.475 Y100.85 E1.2597
G1 X121.375 Y100.935 E1.3332
G1 X118.85 Y100.939 E1.4213
G1 X116.555 Y100.852 E1.5015
G1 X114.348 Y100.701 E1.5788
G1 X113.908 Y100.872 E1.5953
G1 X113.636 Y100.676 E1.607
G1 X113.289 Y100.584 E1.6195
G1 X112.559 Y100.499 E1.6452
G1 X112.2 Y100.525 E1.6577
G1 X111.915 Y100.637 E1.6685
G1 X111.89 Y100.612 E1.6697
G1 X111.628 Y100.434 E1.6808
G1 X111.307 Y100.333 E1.6925
G1 X110.585 Y100.224 E1.718
G1 X109.994 Y100.081 E1.7393
G1 X109.462 Y99.854 E1.7595
G1 X108.983 Y99.547 E1.7793
G1 X108.554 Y99.159 E1.7995
G1 X108.201 Y98.713 E1.8194
G1 X107.93 Y98.217 E1.8391
G1 X107.728 Y97.641 E1.8604
G1 X107.372 Y96.058 E1.9171
G1 X107.107 Y94.399 E1.9758
G1 X106.952 Y92.744 E2.0338
G1 X106.9 Y91.093 E2.0915
G1 X106.952 Y89.408 E2.1504
G1 X107.106 Y87.758 E2.2083
G1 X107.364 Y86.129 E2.2659
G1 X107.728 Y84.505 E2.324
G1 X107.924 Y83.944 E2.3447
G1 X108.2 Y83.436 E2.3649
G1 X108.552 Y82.992 E2.3847
G1 X108.98 Y82.604 E2.4049
G1 X109.461 Y82.295 E2.4249
G1 X109.98 Y82.072 E2.4446
G1 X110.586 Y81.924 E2.4664
G1 X111.389 Y81.803 E2.4947
G1 X111.883 Y81.574 E2.5138
G1 X111.931 Y81.512 E2.5165
G1 X112.247 Y81.638 E2.5284
G1 X112.606 Y81.644 E2.5409
G1 X113.425 Y81.54 E2.5697
G1 X113.735 Y81.413 E2.5814
G1 X113.899 Y81.28 E2.5888
G1 X114.384 Y81.448 E2.6067
G1 X116.522 Y81.296 E2.6816
G1 X118.625 Y81.214 E2.7551
G1 X121.152 Y81.21 E2.8433
G92 E0
G1 E-1 F1800
G0 Z0.48 F1000
G0 X118.685 Y81.613 F7800
G0 Z0.08 F1000
G1 E0 F1800
G92 E0
G1 X115.966 Y81.731 E0.095 F1400
G1 X113.301 Y81.967 E0.1885
G1 X110.574 Y82.329 E0.2845
G1 X110.111 Y82.441 E0.3012
G1 X109.645 Y82.64 E0.3189
G1 X109.217 Y82.915 E0.3366
G1 X108.843 Y83.256 E0.3543
G1 X108.529 Y83.653 E0.372
G1 X108.285 Y84.098 E0.3897
G1 X108.128 Y84.546 E0.4063
G1 X107.722 Y86.395 E0.4724
G1 X107.449 Y88.266 E0.5384
G1 X107.315 Y90.129 E0.6037
G1 X107.315 Y92.01 E0.6694
G1 X107.448 Y93.878 E0.7348
G1 X107.716 Y95.719 E0.7997
G1 X108.125 Y97.594 E0.8667
G1 X108.285 Y98.05 E0.8836
G1 X108.529 Y98.496 E0.9014
G1 X108.843 Y98.892 E0.919
G1 X109.217 Y99.233 E0.9367
G1 X109.645 Y99.508 E0.9545
G1 X110.111 Y99.707 E0.9722
G1 X110.566 Y99.817 E0.9885
G1 X113.256 Y100.177 E1.0833
G1 X115.959 Y100.417 E1.1781
G1 X118.639 Y100.535 E1.2717
G1 X121.346 Y100.535 E1.3663
G1 X124.032 Y100.417 E1.4602
G1 X126.697 Y100.182 E1.5536
G1 X129.426 Y99.819 E1.6498
G1 X129.886 Y99.707 E1.6663
G1 X130.354 Y99.509 E1.684
G1 X130.783 Y99.233 E1.7018
G1 X131.157 Y98.892 E1.7195
G1 X131.473 Y98.493 E1.7373
G1 X131.714 Y98.047 E1.755
G1 X131.87 Y97.602 E1.7715
G1 X132.278 Y95.751 E1.8377
G1 X132.549 Y93.883 E1.9036
G1 X132.685 Y92.02 E1.9688
G1 X132.685 Y90.159 E2.0338
G1 X132.55 Y88.271 E2.0999
G1 X132.284 Y86.427 E2.165
G1 X131.873 Y84.554 E2.2319
G1 X131.714 Y84.101 E2.2487
G1 X131.473 Y83.655 E2.2664
G1 X131.157 Y83.256 E2.2842
G1 X130.783 Y82.915 E2.3019
G1 X130.354 Y82.64 E2.3197
G1 X129.886 Y82.441 E2.3374
G1 X129.435 Y82.332 E2.3536
G1 X126.742 Y81.972 E2.4485
G1 X124.032 Y81.731 E2.5435
G1 X121.359 Y81.613 E2.637
G1 X118.685 Y81.613 E2.7304
G92 E0
G1 E-1 F1800
G0 Z0.48 F1000
G0 X121.159 Y80.789 F7800
G0 Z0.08 F1000
G1 E0 F1800
G92 E0
G1 X123.495 Y80.876 E0.0816 F1225
G1 X125.585 Y81.022 E0.1548
G1 X126.002 Y80.86 E0.1704
G1 X126.136 Y80.704 E0.1776
G1 X126.29 Y80.905 E0.1864
G1 X126.558 Y81.09 E0.1978
G1 X126.794 Y81.152 E0.2063
G1 X127.468 Y81.229 E0.23
G1 X127.743 Y81.202 E0.2397
G1 X128.019 Y81.065 E0.2504
G1 X128.16 Y80.943 E0.2569
G1 X128.214 Y81.037 E0.2607
G1 X128.4 Y81.236 E0.2702
G1 X128.68 Y81.385 E0.2813
G1 X129.494 Y81.512 E0.3101
G1 X130.137 Y81.667 E0.3332
G1 X130.735 Y81.922 E0.3559
G1 X131.273 Y82.266 E0.3782
G1 X131.753 Y82.701 E0.4008
G1 X132.149 Y83.202 E0.4231
G1 X132.456 Y83.76 E0.4454
G1 X132.676 Y84.391 E0.4687
G1 X133.039 Y86.011 E0.5267
G1 X133.308 Y87.697 E0.5863
G1 X133.468 Y89.378 E0.6453
G1 X133.52 Y91.053 E0.7038
G1 X133.468 Y92.766 E0.7636
G1 X133.309 Y94.442 E0.8224
G1 X133.046 Y96.098 E0.881
G1 X132.676 Y97.758 E0.9404
G1 X132.462 Y98.374 E0.9632
G1 X132.149 Y98.944 E0.9859
G1 X131.756 Y99.444 E1.0081
G1 X131.276 Y99.879 E1.0307
G1 X130.737 Y100.225 E1.0531
G1 X130.152 Y100.476 E1.0753
G1 X129.495 Y100.636 E1.0989
G1 X128.735 Y100.751 E1.1258
G1 X128.408 Y100.9 E1.1383
G1 X128.153 Y101.183 E1.1516
G1 X128.149 Y101.195 E1.1521
G1 X127.898 Y101.007 E1.163
G1 X127.649 Y100.93 E1.1722
G1 X127.429 Y100.924 E1.1799
G1 X126.673 Y101.014 E1.2064
G1 X126.342 Y101.191 E1.2195
G1 X126.135 Y101.443 E1.2309
G1 X125.974 Y101.266 E1.2393
G1 X125.563 Y101.126 E1.2545
G1 X123.499 Y101.27 E1.3267
G1 X121.384 Y101.355 E1.4007
G1 X118.843 Y101.359 E1.4894
G1 X116.532 Y101.271 E1.5702
G1 X114.413 Y101.127 E1.6443
G1 X113.991 Y101.29 E1.6601
G1 X113.863 Y101.444 E1.6671
G1 X113.719 Y101.253 E1.6755
G1 X113.453 Y101.062 E1.6869
G1 X113.211 Y100.998 E1.6957
G1 X112.551 Y100.92 E1.7189
G1 X112.295 Y100.939 E1.7278
G1 X112.058 Y101.032 E1.7367
G1 X111.843 Y101.201 E1.7463
G1 X111.824 Y101.148 E1.7482
G1 X111.618 Y100.935 E1.7586
G1 X111.443 Y100.816 E1.7659
G1 X111.212 Y100.743 E1.7744
G1 X110.504 Y100.636 E1.7994
G1 X109.861 Y100.481 E1.8225
G1 X109.265 Y100.226 E1.8451
G1 X108.727 Y99.882 E1.8675
G1 X108.247 Y99.447 E1.8901
G1 X107.849 Y98.946 E1.9124
G1 X107.545 Y98.389 E1.9346
G1 X107.324 Y97.757 E1.958
G1 X106.959 Y96.137 E2.016
G1 X106.691 Y94.452 E2.0755
G1 X106.532 Y92.771 E2.1345
G1 X106.48 Y91.093 E2.1931
G1 X106.532 Y89.382 E2.2529
G1 X106.689 Y87.706 E2.3117
G1 X106.952 Y86.05 E2.3703
G1 X107.324 Y84.39 E2.4297
G1 X107.538 Y83.774 E2.4525
G1 X107.849 Y83.204 E2.4751
G1 X108.244 Y82.704 E2.4974
G1 X108.724 Y82.269 E2.52
G1 X109.263 Y81.923 E2.5424
G1 X109.846 Y81.672 E2.5645
G1 X110.505 Y81.512 E2.5882
G1 X111.267 Y81.397 E2.6151
G1 X111.614 Y81.236 E2.6285
G1 X111.845 Y80.938 E2.6417
G1 X111.993 Y81.085 E2.6489
G1 X112.331 Y81.22 E2.6617
G1 X112.582 Y81.224 E2.6704
G1 X113.317 Y81.13 E2.6963
G1 X113.518 Y81.048 E2.7039
G1 X113.742 Y80.866 E2.714
G1 X113.864 Y80.703 E2.7211
G1 X114.012 Y80.875 E2.729
G1 X114.44 Y81.023 E2.7448
G1 X116.499 Y80.877 E2.8169
G1 X118.616 Y80.794 E2.8909
G1 X121.159 Y80.789 E2.9797
G92 E0
G1 E-1 F1800
G0 Z0.48 F1000
G0 X118.694 Y82.033 F7800
G0 Z0.08 F1000
G1 E0 F1800
G92 E0
G1 X115.994 Y82.15 E0.0944 F1225
G1 X113.347 Y82.384 E0.1872
G1 X110.651 Y82.743 E0.2821
G1 X110.244 Y82.841 E0.2968
G1 X109.843 Y83.013 E0.312
G1 X109.474 Y83.25 E0.3273
G1 X109.151 Y83.544 E0.3426
G1 X108.88 Y83.886 E0.3578
G1 X108.67 Y84.27 E0.3731
G1 X108.533 Y84.661 E0.3876
G1 X108.135 Y86.471 E0.4523
G1 X107.866 Y88.311 E0.5172
G1 X107.735 Y90.144 E0.5814
G1 X107.735 Y91.995 E0.6461
G1 X107.866 Y93.833 E0.7104
G1 X108.13 Y95.644 E0.7743
G1 X108.53 Y97.479 E0.8399
G1 X108.67 Y97.878 E0.8547
G1 X108.88 Y98.263 E0.87
G1 X109.151 Y98.604 E0.8852
G1 X109.474 Y98.898 E0.9005
G1 X109.843 Y99.136 E0.9158
G1 X110.244 Y99.307 E0.931
G1 X110.643 Y99.403 E0.9454
G1 X113.302 Y99.759 E1.0391
G1 X115.987 Y99.998 E1.1332
G1 X118.648 Y100.115 E1.2262
G1 X121.337 Y100.115 E1.3201
G1 X124.004 Y99.998 E1.4134
G1 X126.651 Y99.764 E1.5061
G1 X129.349 Y99.405 E1.6012
G1 X129.754 Y99.307 E1.6158
G1 X130.157 Y99.136 E1.631
G1 X130.526 Y98.898 E1.6464
G1 X130.849 Y98.604 E1.6616
G1 X131.121 Y98.261 E1.6769
G1 X131.329 Y97.877 E1.6922
G1 X131.465 Y97.487 E1.7066
G1 X131.865 Y95.675 E1.7714
G1 X132.132 Y93.837 E1.8363
G1 X132.265 Y92.004 E1.9004
G1 X132.265 Y90.174 E1.9644
G1 X132.132 Y88.316 E2.0294
G1 X131.87 Y86.502 E2.0934
G1 X131.468 Y84.669 E2.159
G1 X131.329 Y84.271 E2.1737
G1 X131.121 Y83.887 E2.1889
G1 X130.849 Y83.544 E2.2042
G1 X130.526 Y83.25 E2.2195
G1 X130.157 Y83.012 E2.2348
G1 X129.754 Y82.841 E2.2501
G1 X129.357 Y82.745 E2.2644
G1 X126.696 Y82.389 E2.3581
G1 X124.004 Y82.15 E2.4525
G1 X121.35 Y82.033 E2.5453
G1 X118.694 Y82.033 E2.638
G92 E0
G1 E-1 F1800
G0 Z0.48 F1000
G0 X121.167 Y80.369 F7800
G0 Z0.08 F1000
G1 E0 F1800
G92 E0
G1 X123.518 Y80.457 E0.0822 F1050
G1 X125.521 Y80.596 E0.1523
G1 X125.752 Y80.506 E0.161
G1 X125.913 Y80.319 E0.1696
G1 X125.961 Y80.15 E0.1757
G1 X125.966 Y79.866 E0.1856
G1 X126 Y79.658 E0.193
G1 X126.072 Y79.451 E0.2006
G1 X126.176 Y79.262 E0.2082
G1 X126.311 Y79.091 E0.2158
G1 X126.471 Y78.946 E0.2233
G1 X126.654 Y78.83 E0.2309
G1 X126.854 Y78.747 E0.2385
G1 X127.066 Y78.7 E0.246
G1 X127.283 Y78.687 E0.2536
G1 X127.499 Y78.709 E0.2612
G1 X127.713 Y78.773 E0.269
G1 X127.909 Y78.867 E0.2766
G1 X128.084 Y78.992 E0.2841
G1 X128.237 Y79.147 E0.2917
G1 X128.362 Y79.324 E0.2993
G1 X128.455 Y79.52 E0.3069
G1 X128.515 Y79.729 E0.3145
G1 X128.537 Y79.943 E0.322
G1 X128.523 Y80.163 E0.3297
G1 X128.463 Y80.452 E0.34
G1 X128.475 Y80.613 E0.3456
G1 X128.512 Y80.712 E0.3493
G1 X128.554 Y80.786 E0.3523
G1 X128.659 Y80.898 E0.3576
G1 X128.815 Y80.981 E0.3638
G1 X129.576 Y81.099 E0.3907
G1 X130.27 Y81.267 E0.4156
G1 X130.932 Y81.549 E0.4408
G1 X131.529 Y81.932 E0.4655
G1 X132.061 Y82.413 E0.4906
G1 X132.5 Y82.97 E0.5154
G1 X132.84 Y83.588 E0.54
G1 X133.081 Y84.275 E0.5654
G1 X133.452 Y85.932 E0.6247
G1 X133.724 Y87.644 E0.6853
G1 X133.887 Y89.351 E0.7452
G1 X133.941 Y91.053 E0.8046
G1 X133.887 Y92.792 E0.8654
G1 X133.726 Y94.495 E0.9251
G1 X133.459 Y96.177 E0.9846
G1 X133.081 Y97.874 E1.0453
G1 X132.847 Y98.545 E1.0701
G1 X132.501 Y99.177 E1.0953
G1 X132.064 Y99.732 E1.12
G1 X131.533 Y100.214 E1.145
G1 X130.934 Y100.598 E1.1698
G1 X130.285 Y100.876 E1.1945
G1 X129.576 Y101.049 E1.22
G1 X128.856 Y101.158 E1.2454
G1 X128.662 Y101.246 E1.2529
G1 X128.528 Y101.395 E1.2599
G1 X128.456 Y101.629 E1.2684
G1 X128.523 Y101.984 E1.281
G1 X128.538 Y102.199 E1.2885
G1 X128.516 Y102.413 E1.2961
G1 X128.457 Y102.623 E1.3037
G1 X128.365 Y102.819 E1.3112
G1 X128.241 Y102.996 E1.3188
G1 X128.088 Y103.152 E1.3264
G1 X127.914 Y103.278 E1.3339
G1 X127.718 Y103.374 E1.3415
G1 X127.511 Y103.436 E1.3491
G1 X127.296 Y103.461 E1.3567
G1 X127.071 Y103.449 E1.3645
G1 X126.86 Y103.403 E1.3721
G1 X126.66 Y103.321 E1.3796
G1 X126.476 Y103.206 E1.3872
G1 X126.315 Y103.062 E1.3948
G1 X126.179 Y102.891 E1.4024
G1 X126.074 Y102.702 E1.4099
G1 X126.002 Y102.496 E1.4175
G1 X125.966 Y102.282 E1.4251
G1 X125.961 Y101.997 E1.4351
G1 X125.908 Y101.818 E1.4416
G1 X125.736 Y101.629 E1.4505
G1 X125.507 Y101.551 E1.459
G1 X123.522 Y101.689 E1.5285
G1 X121.392 Y101.775 E1.6029
G1 X118.835 Y101.779 E1.6922
G1 X116.51 Y101.691 E1.7735
G1 X114.477 Y101.552 E1.8446
G1 X114.244 Y101.642 E1.8533
G1 X114.082 Y101.837 E1.8622
G1 X114.037 Y102.003 E1.8682
G1 X114.034 Y102.282 E1.8779
G1 X113.998 Y102.49 E1.8853
G1 X113.928 Y102.697 E1.8929
G1 X113.823 Y102.886 E1.9005
G1 X113.687 Y103.057 E1.9081
G1 X113.527 Y103.202 E1.9157
G1 X113.344 Y103.318 E1.9232
G1 X113.144 Y103.401 E1.9308
G1 X112.932 Y103.449 E1.9384
G1 X112.715 Y103.462 E1.946
G1 X112.501 Y103.439 E1.9535
G1 X112.285 Y103.376 E1.9613
G1 X112.091 Y103.281 E1.9689
G1 X111.914 Y103.156 E1.9765
G1 X111.762 Y103.001 E1.984
G1 X111.638 Y102.824 E1.9916
G1 X111.543 Y102.628 E1.9992
G1 X111.485 Y102.419 E2.0068
G1 X111.461 Y102.204 E2.0143
G1 X111.475 Y101.983 E2.0221
G1 X111.542 Y101.609 E2.0353
G1 X111.459 Y101.375 E2.044
G1 X111.346 Y101.258 E2.0497
G1 X111.258 Y101.198 E2.0534
G1 X111.117 Y101.154 E2.0586
G1 X110.423 Y101.049 E2.0831
G1 X109.728 Y100.881 E2.108
G1 X109.068 Y100.599 E2.1331
G1 X108.471 Y100.217 E2.1579
G1 X107.939 Y99.735 E2.1829
G1 X107.498 Y99.179 E2.2077
G1 X107.16 Y98.56 E2.2323
G1 X106.919 Y97.873 E2.2578
G1 X106.546 Y96.216 E2.3171
G1 X106.274 Y94.505 E2.3776
G1 X106.113 Y92.797 E2.4375
G1 X106.059 Y91.093 E2.497
G1 X106.113 Y89.356 E2.5577
G1 X106.272 Y87.653 E2.6174
G1 X106.539 Y85.971 E2.6769
G1 X106.919 Y84.275 E2.7377
G1 X107.153 Y83.603 E2.7625
G1 X107.497 Y82.971 E2.7876
G1 X107.936 Y82.416 E2.8123
G1 X108.467 Y81.935 E2.8374
G1 X109.066 Y81.55 E2.8622
G1 X109.713 Y81.272 E2.8868
G1 X110.424 Y81.099 E2.9123
G1 X111.145 Y80.99 E2.9378
G1 X111.344 Y80.898 E2.9455
G1 X111.501 Y80.695 E2.9545
G1 X111.54 Y80.509 E2.9611
G1 X111.475 Y80.165 E2.9733
G1 X111.461 Y79.95 E2.9808
G1 X111.484 Y79.735 E2.9884
G1 X111.541 Y79.525 E2.996
G1 X111.635 Y79.329 E3.0036
G1 X111.758 Y79.151 E3.0111
G1 X111.91 Y78.996 E3.0187
G1 X112.086 Y78.87 E3.0263
G1 X112.28 Y78.775 E3.0338
G1 X112.489 Y78.712 E3.0415
G1 X112.703 Y78.687 E3.049
G1 X112.927 Y78.699 E3.0568
G1 X113.138 Y78.745 E3.0644
G1 X113.338 Y78.828 E3.0719
G1 X113.522 Y78.942 E3.0795
G1 X113.683 Y79.087 E3.087
G1 X113.82 Y79.257 E3.0947
G1 X113.926 Y79.446 E3.1022
G1 X113.996 Y79.652 E3.1098
G1 X114.034 Y79.867 E3.1175
G1 X114.039 Y80.162 E3.1278
G1 X114.089 Y80.322 E3.1336
G1 X114.256 Y80.515 E3.1425
G1 X114.496 Y80.598 E3.1514
G1 X116.476 Y80.457 E3.2207
G1 X118.608 Y80.374 E3.2952
G1 X121.167 Y80.369 E3.3846
G92 E0
G1 E-1 F1800
G0 Z0.48 F1000
G0 X118.703 Y82.453 F7800
G0 Z0.08 F1000
G1 E0 F1800
G92 E0
G1 X116.022 Y82.569 E0.0937 F1050
G1 X113.394 Y82.802 E0.1859
G1 X110.728 Y83.156 E0.2798
G1 X110.377 Y83.241 E0.2924
G1 X110.04 Y83.385 E0.3052
G1 X109.731 Y83.584 E0.318
G1 X109.459 Y83.831 E0.3309
G1 X109.231 Y84.119 E0.3437
G1 X109.055 Y84.441 E0.3565
G1 X108.937 Y84.776 E0.3689
G1 X108.549 Y86.546 E0.4322
G1 X108.284 Y88.356 E0.4961
G1 X108.155 Y90.159 E0.5592
G1 X108.155 Y91.981 E0.6228
G1 X108.284 Y93.787 E0.6861
G1 X108.543 Y95.569 E0.7489
G1 X108.935 Y97.364 E0.8131
G1 X109.055 Y97.707 E0.8258
G1 X109.231 Y98.03 E0.8386
G1 X109.459 Y98.317 E0.8514
G1 X109.731 Y98.564 E0.8643
G1 X110.04 Y98.763 E0.8771
G1 X110.377 Y98.907 E0.8899
G1 X110.72 Y98.99 E0.9022
G1 X113.349 Y99.342 E0.9948
G1 X116.015 Y99.579 E1.0883
G1 X118.657 Y99.695 E1.1807
G1 X121.328 Y99.695 E1.274
G1 X123.976 Y99.579 E1.3666
G1 X126.604 Y99.347 E1.4587
G1 X129.272 Y98.992 E1.5527
G1 X129.621 Y98.907 E1.5652
G1 X129.96 Y98.763 E1.5781
G1 X130.269 Y98.564 E1.5909
G1 X130.541 Y98.317 E1.6037
G1 X130.769 Y98.029 E1.6166
G1 X130.944 Y97.706 E1.6294
G1 X131.061 Y97.372 E1.6417
G1 X131.451 Y95.6 E1.7051
G1 X131.714 Y93.792 E1.7689
G1 X131.845 Y91.989 E1.8321
G1 X131.845 Y90.189 E1.8949
G1 X131.714 Y88.361 E1.9589
G1 X131.457 Y86.577 E2.0219
G1 X131.063 Y84.784 E2.086
G1 X130.944 Y84.442 E2.0986
G1 X130.769 Y84.119 E2.1115
G1 X130.541 Y83.831 E2.1243
G1 X130.269 Y83.584 E2.1371
G1 X129.96 Y83.385 E2.15
G1 X129.621 Y83.241 E2.1628
G1 X129.28 Y83.158 E2.1751
G1 X126.65 Y82.807 E2.2678
G1 X123.976 Y82.569 E2.3615
G1 X121.341 Y82.453 E2.4536
G1 X118.703 Y82.453 E2.5457
G92 E0
G1 E-1 F1800
G0 Z0.48 F1000
G0 X113.66 Y80.011 F7800
G0 Z0.08 F1000
G1 E0 F1800
G92 E0
G1 X113.652 Y79.854 E0.0055 F1050
G1 X113.619 Y79.701 E0.011
G1 X113.559 Y79.556 E0.0164
G1 X113.476 Y79.424 E0.0219
G1 X113.371 Y79.306 E0.0274
G1 X113.245 Y79.209 E0.0329
G1 X113.107 Y79.136 E0.0384
G1 X112.957 Y79.087 E0.0439
G1 X112.801 Y79.064 E0.0494
G1 X112.644 Y79.069 E0.0549
G1 X112.49 Y79.1 E0.0604
G1 X112.337 Y79.162 E0.0661
G1 X112.204 Y79.246 E0.0716
G1 X112.092 Y79.343 E0.0768
G1 X111.99 Y79.471 E0.0825
G1 X111.909 Y79.618 E0.0884
G1 X111.838 Y79.916 E0.0991
G1 X111.871 Y80.219 E0.1097
G1 X111.93 Y80.373 E0.1155
G1 X112.016 Y80.516 E0.1213
G1 X112.228 Y80.726 E0.1318
G1 X112.415 Y80.801 E0.1388
G1 X112.559 Y80.804 E0.1438
G1 X113.209 Y80.721 E0.1667
G1 X113.302 Y80.683 E0.1702
G1 X113.437 Y80.573 E0.1763
G1 X113.529 Y80.45 E0.1817
G1 X113.639 Y80.176 E0.192
G1 X113.66 Y80.011 E0.1978
G92 E0
G1 E-1 F1800
G0 Z0.48 F1000
G0 X126.341 Y80.02 F7800
G0 Z0.08 F1000
G1 E0 F1800
G92 E0
G1 X126.36 Y80.174 E0.0054 F1050
G1 X126.408 Y80.325 E0.011
G1 X126.479 Y80.461 E0.0163
G1 X126.583 Y80.597 E0.0223
G1 X126.736 Y80.703 E0.0288
G1 X126.871 Y80.738 E0.0337
G1 X127.472 Y80.806 E0.0548
G1 X127.626 Y80.791 E0.0602
G1 X127.784 Y80.713 E0.0664
G1 X127.892 Y80.619 E0.0713
G1 X127.992 Y80.503 E0.0767
G1 X128.072 Y80.365 E0.0823
G1 X128.127 Y80.218 E0.0877
G1 X128.155 Y80.063 E0.0933
G1 X128.158 Y79.908 E0.0987
G1 X128.133 Y79.743 E0.1045
G1 X128.012 Y79.472 E0.1149
G1 X127.901 Y79.335 E0.121
G1 X127.663 Y79.161 E0.1313
G1 X127.509 Y79.1 E0.1371
G1 X127.353 Y79.069 E0.1426
G1 X127.197 Y79.064 E0.1481
G1 X127.031 Y79.089 E0.154
G1 X126.761 Y79.204 E0.1642
G1 X126.624 Y79.311 E0.1703
G1 X126.518 Y79.43 E0.1759
G1 X126.436 Y79.563 E0.1813
G1 X126.379 Y79.702 E0.1866
G1 X126.345 Y79.864 E0.1924
G1 X126.341 Y80.02 E0.1978
G92 E0
G1 E-1 F1800
G0 Z0.48 F1000
G0 X126.802 Y101.422 F7800
G0 Z0.08 F1000
G1 E0 F1800
G92 E0
G1 X126.614 Y101.522 E0.0075 F1050
G1 X126.479 Y101.686 E0.0148
G1 X126.408 Y101.823 E0.0202
G1 X126.358 Y101.982 E0.0261
G1 X126.343 Y102.276 E0.0363
G1 X126.377 Y102.439 E0.0422
G1 X126.436 Y102.584 E0.0476
G1 X126.518 Y102.718 E0.0531
G1 X126.629 Y102.842 E0.0589
G1 X126.754 Y102.939 E0.0645
G1 X126.885 Y103.008 E0.0696
G1 X127.039 Y103.061 E0.0753
G1 X127.206 Y103.086 E0.0812
G1 X127.501 Y103.051 E0.0916
G1 X127.663 Y102.987 E0.0977
G1 X127.901 Y102.813 E0.108
G1 X128.006 Y102.683 E0.1138
G1 X128.082 Y102.546 E0.1193
G1 X128.134 Y102.397 E0.1248
G1 X128.159 Y102.231 E0.1306
G1 X128.13 Y101.938 E0.1409
G1 X128.072 Y101.783 E0.1467
G1 X127.992 Y101.647 E0.1522
G1 X127.887 Y101.524 E0.1579
G1 X127.704 Y101.386 E0.1659
G1 X127.58 Y101.348 E0.1704
G1 X127.448 Y101.344 E0.175
G1 X126.802 Y101.421 E0.1978
G92 E0
G1 E-1 F1800
G0 Z0.48 F1000
G0 X113.271 Y101.448 F7800
G0 Z0.08 F1000
G1 E0 F1800
G92 E0
G1 X113.132 Y101.411 E0.005 F1050
G1 X112.542 Y101.342 E0.0258
G1 X112.389 Y101.354 E0.0311
G1 X112.268 Y101.401 E0.0357
G1 X112.104 Y101.53 E0.043
G1 X111.933 Y101.767 E0.0532
G1 X111.874 Y101.921 E0.0589
G1 X111.844 Y102.076 E0.0644
G1 X111.84 Y102.233 E0.0699
G1 X111.864 Y102.388 E0.0754
G1 X111.913 Y102.537 E0.0809
G1 X111.99 Y102.677 E0.0864
G1 X112.097 Y102.812 E0.0925
G1 X112.33 Y102.983 E0.1026
G1 X112.49 Y103.048 E0.1086
G1 X112.644 Y103.079 E0.1141
G1 X112.801 Y103.084 E0.1196
G1 X112.957 Y103.061 E0.1251
G1 X113.107 Y103.012 E0.1306
G1 X113.245 Y102.939 E0.136
G1 X113.378 Y102.837 E0.1419
G1 X113.555 Y102.601 E0.1522
G1 X113.619 Y102.447 E0.158
G1 X113.652 Y102.294 E0.1635
G1 X113.66 Y102.137 E0.169
G1 X113.638 Y101.973 E0.1747
G1 X113.594 Y101.831 E0.1799
G1 X113.523 Y101.691 E0.1854
G1 X113.422 Y101.557 E0.1913
G1 X113.271 Y101.448 E0.1978
G92 E0
G1 E-1 F1800
G0 Z0.68 F1000
; layer 2, Z = 0.08
T1
; tool H0.2 W0.42
G0 X101.753 Y78.385 F7800
G0 Z0.08 F1000
G1 E0 F540
G92 E0
G1 X102.622 Y77.349 E0.0472 F2100
G1 X103.606 Y76.42 E0.0945
G1 X104.694 Y75.609 E0.1419
G1 X105.953 Y74.882 E0.1926
G1 X107.453 Y74.27 E0.2492
G1 X108.819 Y73.918 E0.2985
G1 X111.051 Y73.596 E0.3772
G1 X112.836 Y73.388 E0.44
G1 X114.641 Y73.224 E0.5033
G1 X116.429 Y73.109 E0.5659
G1 X118.198 Y73.04 E0.6277
G1 X120.009 Y73.016 E0.6909
G1 X121.808 Y73.039 E0.7538
G1 X123.598 Y73.108 E0.8163
G1 X125.386 Y73.223 E0.8789
G1 X127.169 Y73.384 E0.9414
G1 X128.948 Y73.59 E1.004
G1 X131.001 Y73.883 E1.0764
G1 X132.34 Y74.19 E1.1244
G1 X133.698 Y74.705 E1.1751
G1 X134.909 Y75.333 E1.2227
G1 X136.115 Y76.151 E1.2736
G1 X137.324 Y77.239 E1.3304
G1 X138.266 Y78.353 E1.3814
G1 X139.126 Y79.653 E1.4358
G1 X139.975 Y81.516 E1.5073
G1 X140.51 Y83.693 E1.5856
G1 X140.773 Y85.032 E1.6333
G1 X140.984 Y86.371 E1.6806
G1 X141.139 Y87.694 E1.7271
G1 X141.245 Y89.042 E1.7743
G1 X141.298 Y90.385 E1.8213
G1 X141.298 Y91.726 E1.8681
G1 X141.247 Y93.068 E1.915
G1 X141.144 Y94.407 E1.9619
G1 X140.988 Y95.741 E2.0088
G1 X140.782 Y97.067 E2.0557
G1 X140.524 Y98.385 E2.1026
G1 X140.176 Y99.858 E2.1554
G1 X139.82 Y100.981 E2.1966
G1 X139.253 Y102.23 E2.2445
G1 X138.552 Y103.392 E2.2919
G1 X137.723 Y104.463 E2.3392
G1 X136.777 Y105.429 E2.3864
G1 X135.721 Y106.281 E2.4338
G1 X134.57 Y107.006 E2.4813
G1 X133.347 Y107.591 E2.5286
G1 X132.064 Y108.029 E2.576
G1 X130.954 Y108.269 E2.6156
G1 X128.984 Y108.55 E2.6851
G1 X127.204 Y108.758 E2.7477
G1 X125.359 Y108.924 E2.8124
G1 X123.613 Y109.037 E2.8735
G1 X121.845 Y109.105 E2.9353
G1 X120.034 Y109.129 E2.9985
G1 X118.234 Y109.106 E3.0614
G1 X116.444 Y109.037 E3.124
G1 X114.657 Y108.922 E3.1865
G1 X112.873 Y108.761 E3.2491
G1 X111.075 Y108.552 E3.3123
G1 X108.498 Y108.175 E3.4032
G1 X106.755 Y107.629 E3.467
G1 X105.126 Y106.823 E3.5305
G1 X103.642 Y105.773 E3.594
G1 X102.405 Y104.569 E3.6543
G1 X101.51 Y103.421 E3.7051
G1 X100.703 Y102.092 E3.7594
G1 X99.989 Y100.349 E3.8252
G1 X99.529 Y98.431 E3.8941
G1 X99.267 Y97.102 E3.9414
G1 X99.057 Y95.761 E3.9888
G1 X98.901 Y94.426 E4.0357
G1 X98.798 Y93.102 E4.0821
G1 X98.745 Y91.763 E4.1289
G1 X98.744 Y90.419 E4.1758
G1 X98.796 Y89.079 E4.2227
G1 X98.899 Y87.741 E4.2695
G1 X99.055 Y86.396 E4.3168
G1 X99.263 Y85.065 E4.3639
G1 X99.521 Y83.748 E4.4107
G1 X99.887 Y82.202 E4.4662
G1 X100.35 Y80.829 E4.5168
G1 X101.01 Y79.515 E4.5682
G1 X101.753 Y78.385 E4.6154
G0 X102.091 Y78.636 F7800
G92 E0
G1 X102.928 Y77.637 E0.0455 F2100
G1 X103.876 Y76.742 E0.0911
G1 X104.925 Y75.96 E0.1367
G1 X106.138 Y75.26 E0.1856
G1 X107.585 Y74.669 E0.2402
G1 X108.901 Y74.331 E0.2877
G1 X111.105 Y74.013 E0.3655
G1 X112.879 Y73.806 E0.4278
G1 X114.673 Y73.643 E0.4908
G1 X116.451 Y73.528 E0.553
G1 X118.209 Y73.46 E0.6144
G1 X120.009 Y73.436 E0.6773
G1 X121.798 Y73.459 E0.7397
G1 X123.577 Y73.527 E0.8019
G1 X125.353 Y73.642 E0.8641
G1 X127.126 Y73.802 E0.9263
G1 X128.894 Y74.007 E0.9884
G1 X130.924 Y74.296 E1.06
G1 X132.218 Y74.593 E1.1064
G1 X133.527 Y75.089 E1.1553
G1 X134.693 Y75.694 E1.2012
G1 X135.855 Y76.482 E1.2502
G1 X137.022 Y77.532 E1.305
G1 X137.93 Y78.606 E1.3541
G1 X138.757 Y79.857 E1.4065
G1 X139.577 Y81.654 E1.4755
G1 X140.1 Y83.784 E1.5521
G1 X140.36 Y85.106 E1.5991
G1 X140.568 Y86.428 E1.6458
G1 X140.721 Y87.735 E1.6918
G1 X140.826 Y89.067 E1.7385
G1 X140.878 Y90.393 E1.7848
G1 X140.878 Y91.718 E1.8311
G1 X140.828 Y93.044 E1.8774
G1 X140.725 Y94.367 E1.9238
G1 X140.572 Y95.685 E1.9701
G1 X140.368 Y96.995 E2.0164
G1 X140.113 Y98.296 E2.0627
G1 X139.77 Y99.746 E2.1147
G1 X139.427 Y100.83 E2.1545
G1 X138.881 Y102.034 E2.2006
G1 X138.205 Y103.155 E2.2463
G1 X137.406 Y104.186 E2.2919
G1 X136.494 Y105.117 E2.3374
G1 X135.476 Y105.939 E2.3831
G1 X134.367 Y106.638 E2.4289
G1 X133.188 Y107.201 E2.4745
G1 X131.952 Y107.623 E2.5201
G1 X130.88 Y107.855 E2.5584
G1 X128.93 Y108.133 E2.6272
G1 X127.161 Y108.34 E2.6894
G1 X125.327 Y108.505 E2.7537
G1 X123.591 Y108.617 E2.8145
G1 X121.834 Y108.685 E2.8759
G1 X120.034 Y108.709 E2.9388
G1 X118.245 Y108.686 E3.0012
G1 X116.466 Y108.618 E3.0634
G1 X114.689 Y108.503 E3.1256
G1 X112.916 Y108.344 E3.1877
G1 X111.129 Y108.136 E3.2506
G1 X108.592 Y107.764 E3.3401
G1 X106.912 Y107.238 E3.4016
G1 X105.342 Y106.461 E3.4628
G1 X103.911 Y105.449 E3.524
G1 X102.718 Y104.288 E3.5821
G1 X101.856 Y103.182 E3.6311
G1 X101.08 Y101.903 E3.6834
G1 X100.39 Y100.22 E3.7469
G1 X99.939 Y98.342 E3.8143
G1 X99.681 Y97.029 E3.8611
G1 X99.473 Y95.704 E3.9079
G1 X99.319 Y94.386 E3.9542
G1 X99.217 Y93.078 E4.0001
G1 X99.165 Y91.754 E4.0463
G1 X99.164 Y90.427 E4.0927
G1 X99.215 Y89.103 E4.1389
G1 X99.317 Y87.781 E4.1852
G1 X99.471 Y86.452 E4.232
G1 X99.677 Y85.138 E4.2784
G1 X99.932 Y83.837 E4.3247
G1 X100.292 Y82.318 E4.3792
G1 X100.738 Y80.992 E4.4281
G1 X101.374 Y79.725 E4.4776
G1 X102.091 Y78.636 E4.5231
G92 E0
G1 E-1 F1800
G0 Z0.48 F1000
G0 X120.012 Y84.957 F7800
G0 Z0.08 F1000
G1 E0 F1800
G92 E0
G1 X121.502 Y84.976 E0.052 F1925
G1 X122.985 Y85.033 E0.1039
G1 X124.466 Y85.128 E0.1557
G1 X125.943 Y85.262 E0.2075
G1 X127.417 Y85.433 E0.2593
G1 X128.687 Y85.614 E0.3041
G1 X128.848 Y86.271 E0.3277
G1 X129.014 Y87.113 E0.3577
G1 X129.152 Y87.994 E0.3888
G1 X129.254 Y88.857 E0.4192
G1 X129.323 Y89.744 E0.4503
G1 X129.358 Y90.622 E0.4809
G1 X129.358 Y91.501 E0.5116
G1 X129.325 Y92.38 E0.5424
G1 X129.257 Y93.257 E0.5731
G1 X129.155 Y94.131 E0.6038
G1 X129.02 Y95 E0.6345
G1 X128.851 Y95.863 E0.6652
G1 X128.693 Y96.53 E0.6892
G1 X127.448 Y96.708 E0.7331
G1 X125.975 Y96.88 E0.7849
G1 X124.439 Y97.018 E0.8388
G1 X122.997 Y97.111 E0.8892
G1 X121.534 Y97.168 E0.9404
G1 X120.031 Y97.188 E0.9929
G1 X118.54 Y97.169 E1.0449
G1 X117.058 Y97.112 E1.0967
G1 X115.577 Y97.017 E1.1486
G1 X114.099 Y96.883 E1.2004
G1 X112.63 Y96.713 E1.252
G1 X111.35 Y96.525 E1.2972
G1 X111.196 Y95.883 E1.3203
G1 X111.027 Y95.023 E1.3509
G1 X110.889 Y94.142 E1.382
G1 X110.787 Y93.269 E1.4127
G1 X110.719 Y92.404 E1.443
G1 X110.685 Y91.525 E1.4737
G1 X110.684 Y90.644 E1.5045
G1 X110.718 Y89.767 E1.5351
G1 X110.786 Y88.89 E1.5659
G1 X110.888 Y88.007 E1.5969
G1 X111.024 Y87.136 E1.6277
G1 X111.194 Y86.273 E1.6584
G1 X111.349 Y85.617 E1.682
G1 X112.595 Y85.437 E1.7259
G1 X114.068 Y85.265 E1.7777
G1 X115.565 Y85.129 E1.8302
G1 X117.045 Y85.034 E1.882
G1 X118.508 Y84.977 E1.9331
G1 X120.012 Y84.957 E1.9857
G0 X120.012 Y84.537 F7800
G92 E0
G1 X121.513 Y84.556 E0.0524 F1750
G1 X123.007 Y84.614 E0.1046
G1 X124.498 Y84.71 E0.1568
G1 X125.987 Y84.844 E0.209
G1 X127.471 Y85.016 E0.2612
G1 X128.896 Y85.219 E0.3115
G1 X128.992 Y85.241 E0.3149
G1 X128.998 Y85.244 E0.3152
G1 X129.025 Y85.269 E0.3164
G1 X129.045 Y85.312 E0.3181
G1 X129.258 Y86.18 E0.3493
G1 X129.427 Y87.04 E0.3799
G1 X129.569 Y87.937 E0.4116
G1 X129.672 Y88.816 E0.4426
G1 X129.743 Y89.719 E0.4742
G1 X129.778 Y90.614 E0.5054
G1 X129.778 Y91.508 E0.5367
G1 X129.744 Y92.405 E0.568
G1 X129.675 Y93.298 E0.5993
G1 X129.571 Y94.188 E0.6306
G1 X129.433 Y95.073 E0.6619
G1 X129.261 Y95.952 E0.6932
G1 X129.063 Y96.791 E0.7233
G1 X129.045 Y96.848 E0.7254
G1 X129.041 Y96.858 E0.7257
G1 X129.034 Y96.868 E0.7262
G1 X129.027 Y96.878 E0.7266
G1 X129.018 Y96.887 E0.727
G1 X129.008 Y96.894 E0.7274
G1 X128.997 Y96.901 E0.7279
G1 X128.987 Y96.906 E0.7283
G1 X128.975 Y96.911 E0.7288
G1 X128.921 Y96.922 E0.7307
G1 X127.503 Y97.125 E0.7807
G1 X126.018 Y97.298 E0.8329
G1 X124.471 Y97.437 E0.8871
G1 X123.019 Y97.531 E0.938
G1 X121.545 Y97.588 E0.9895
G1 X120.031 Y97.608 E1.0424
G1 X118.529 Y97.589 E1.0948
G1 X117.036 Y97.532 E1.147
G1 X115.544 Y97.436 E1.1992
G1 X114.056 Y97.301 E1.2514
G1 X112.575 Y97.129 E1.3034
G1 X111.071 Y96.909 E1.3565
G1 X111.058 Y96.904 E1.357
G1 X111.043 Y96.897 E1.3576
G1 X111.03 Y96.888 E1.3582
G1 X111.014 Y96.873 E1.3589
G1 X110.984 Y96.8 E1.3617
G1 X110.786 Y95.973 E1.3914
G1 X110.613 Y95.096 E1.4226
G1 X110.473 Y94.199 E1.4543
G1 X110.369 Y93.31 E1.4856
G1 X110.3 Y92.429 E1.5164
G1 X110.265 Y91.533 E1.5477
G1 X110.264 Y90.637 E1.579
G1 X110.299 Y89.742 E1.6103
G1 X110.367 Y88.85 E1.6416
G1 X110.472 Y87.95 E1.6732
G1 X110.611 Y87.063 E1.7045
G1 X110.783 Y86.185 E1.7358
G1 X110.975 Y85.375 E1.7649
G1 X111.007 Y85.279 E1.7684
G1 X111.01 Y85.274 E1.7686
G1 X111.019 Y85.264 E1.7691
G1 X111.027 Y85.256 E1.7695
G1 X111.035 Y85.25 E1.7698
G1 X111.081 Y85.231 E1.7716
G1 X111.083 Y85.231 E1.7716
G1 X112.541 Y85.02 E1.8231
G1 X114.025 Y84.847 E1.8752
G1 X115.533 Y84.71 E1.9281
G1 X117.024 Y84.614 E1.9803
G1 X118.498 Y84.557 E2.0318
G1 X120.012 Y84.537 E2.0847
G0 X120.012 Y84.117 F7800
G92 E0
G1 X121.524 Y84.136 E0.0528 F1575
G1 X123.028 Y84.194 E0.1054
G1 X124.531 Y84.291 E0.158
G1 X126.03 Y84.426 E0.2105
G1 X127.525 Y84.6 E0.2631
G1 X128.973 Y84.806 E0.3142
G1 X129.117 Y84.839 E0.3194
G1 X129.161 Y84.856 E0.321
G1 X129.217 Y84.885 E0.3232
G1 X129.256 Y84.911 E0.3248
G1 X129.338 Y84.985 E0.3287
G1 X129.368 Y85.021 E0.3303
G1 X129.387 Y85.049 E0.3315
G1 X129.444 Y85.174 E0.3363
G1 X129.669 Y86.09 E0.3692
G1 X129.841 Y86.967 E0.4004
G1 X129.985 Y87.88 E0.4327
G1 X130.09 Y88.776 E0.4642
G1 X130.162 Y89.695 E0.4964
G1 X130.198 Y90.605 E0.5282
G1 X130.198 Y91.517 E0.5601
G1 X130.163 Y92.429 E0.5919
G1 X130.093 Y93.338 E0.6238
G1 X129.988 Y94.245 E0.6557
G1 X129.847 Y95.146 E0.6875
G1 X129.672 Y96.04 E0.7194
G1 X129.468 Y96.903 E0.7503
G1 X129.438 Y96.999 E0.7538
G1 X129.413 Y97.053 E0.7559
G1 X129.381 Y97.106 E0.7581
G1 X129.344 Y97.154 E0.7602
G1 X129.301 Y97.198 E0.7623
G1 X129.253 Y97.237 E0.7645
G1 X129.201 Y97.27 E0.7666
G1 X129.146 Y97.296 E0.7688
G1 X129.087 Y97.316 E0.7709
G1 X128.995 Y97.336 E0.7742
G1 X127.556 Y97.541 E0.825
G1 X126.062 Y97.716 E0.8775
G1 X124.504 Y97.856 E0.9321
G1 X123.041 Y97.95 E0.9834
G1 X121.556 Y98.008 E1.0353
G1 X120.031 Y98.028 E1.0885
G1 X118.519 Y98.009 E1.1413
G1 X117.015 Y97.951 E1.1939
G1 X115.512 Y97.854 E1.2465
G1 X114.013 Y97.719 E1.299
G1 X112.521 Y97.546 E1.3515
G1 X110.977 Y97.319 E1.406
G1 X110.901 Y97.295 E1.4088
G1 X110.827 Y97.259 E1.4117
G1 X110.761 Y97.212 E1.4145
G1 X110.691 Y97.144 E1.4179
G1 X110.662 Y97.108 E1.4195
G1 X110.645 Y97.079 E1.4207
G1 X110.583 Y96.929 E1.4263
G1 X110.375 Y96.062 E1.4575
G1 X110.2 Y95.169 E1.4893
G1 X110.056 Y94.256 E1.5215
G1 X109.951 Y93.351 E1.5534
G1 X109.881 Y92.453 E1.5848
G1 X109.845 Y91.542 E1.6167
G1 X109.844 Y90.629 E1.6486
G1 X109.879 Y89.718 E1.6804
G1 X109.949 Y88.809 E1.7122
G1 X110.056 Y87.894 E1.7444
G1 X110.197 Y86.991 E1.7763
G1 X110.372 Y86.096 E1.8082
G1 X110.57 Y85.259 E1.8382
G1 X110.62 Y85.113 E1.8436
G1 X110.64 Y85.074 E1.8451
G1 X110.673 Y85.023 E1.8473
G1 X110.712 Y84.976 E1.8494
G1 X110.757 Y84.934 E1.8515
G1 X110.806 Y84.897 E1.8537
G1 X110.848 Y84.873 E1.8554
G1 X110.949 Y84.832 E1.8592
G1 X111.001 Y84.818 E1.861
G1 X112.487 Y84.604 E1.9135
G1 X113.981 Y84.429 E1.966
G1 X115.5 Y84.292 E2.0193
G1 X117.002 Y84.195 E2.0718
G1 X118.487 Y84.137 E2.1237
G1 X120.012 Y84.117 E2.177
G0 X120.012 Y83.697 F7800
G92 E0
G1 X121.534 Y83.716 E0.0532 F1400
G1 X123.05 Y83.775 E0.1061
G1 X124.563 Y83.872 E0.1591
G1 X126.073 Y84.008 E0.212
G1 X127.579 Y84.183 E0.265
G1 X129.049 Y84.393 E0.3169
G1 X129.239 Y84.436 E0.3237
G1 X129.333 Y84.472 E0.3272
G1 X129.432 Y84.523 E0.3311
G1 X129.515 Y84.579 E0.3346
G1 X129.64 Y84.692 E0.3404
G1 X129.705 Y84.769 E0.3439
G1 X129.755 Y84.845 E0.3471
G1 X129.842 Y85.035 E0.3544
G1 X130.079 Y85.999 E0.3891
G1 X130.255 Y86.894 E0.4209
G1 X130.401 Y87.823 E0.4538
G1 X130.508 Y88.735 E0.4858
G1 X130.581 Y89.67 E0.5186
G1 X130.618 Y90.597 E0.551
G1 X130.618 Y91.524 E0.5834
G1 X130.583 Y92.453 E0.6159
G1 X130.511 Y93.379 E0.6483
G1 X130.404 Y94.301 E0.6807
G1 X130.261 Y95.218 E0.7131
G1 X130.083 Y96.129 E0.7455
G1 X129.873 Y97.014 E0.7773
G1 X129.83 Y97.15 E0.7823
G1 X129.785 Y97.249 E0.7861
G1 X129.728 Y97.344 E0.7899
G1 X129.661 Y97.431 E0.7938
G1 X129.584 Y97.509 E0.7976
G1 X129.498 Y97.579 E0.8015
G1 X129.404 Y97.638 E0.8054
G1 X129.305 Y97.685 E0.8092
G1 X129.2 Y97.721 E0.8131
G1 X129.069 Y97.75 E0.8177
G1 X127.611 Y97.958 E0.8692
G1 X126.105 Y98.133 E0.9221
G1 X124.536 Y98.275 E0.9771
G1 X123.062 Y98.37 E1.0287
G1 X121.567 Y98.428 E1.081
G1 X120.031 Y98.448 E1.1346
G1 X118.508 Y98.429 E1.1878
G1 X116.993 Y98.371 E1.2408
G1 X115.48 Y98.273 E1.2937
G1 X113.97 Y98.137 E1.3467
G1 X112.466 Y97.962 E1.3995
G1 X110.883 Y97.73 E1.4554
G1 X110.744 Y97.686 E1.4605
G1 X110.611 Y97.621 E1.4657
G1 X110.491 Y97.536 E1.4708
G1 X110.377 Y97.425 E1.4764
G1 X110.316 Y97.347 E1.4798
G1 X110.269 Y97.268 E1.483
G1 X110.183 Y97.058 E1.491
G1 X109.965 Y96.152 E1.5235
G1 X109.786 Y95.242 E1.5559
G1 X109.64 Y94.313 E1.5887
G1 X109.532 Y93.391 E1.6211
G1 X109.461 Y92.478 E1.6531
G1 X109.425 Y91.55 E1.6856
G1 X109.424 Y90.621 E1.718
G1 X109.46 Y89.694 E1.7504
G1 X109.531 Y88.769 E1.7828
G1 X109.64 Y87.837 E1.8156
G1 X109.783 Y86.918 E1.8481
G1 X109.962 Y86.007 E1.8805
G1 X110.166 Y85.144 E1.9115
G1 X110.231 Y84.951 E1.9186
G1 X110.275 Y84.863 E1.922
G1 X110.336 Y84.771 E1.9258
G1 X110.406 Y84.687 E1.9297
G1 X110.486 Y84.612 E1.9335
G1 X110.575 Y84.545 E1.9374
G1 X110.662 Y84.495 E1.9409
G1 X110.817 Y84.432 E1.9467
G1 X110.918 Y84.406 E1.9504
G1 X112.432 Y84.187 E2.0038
G1 X113.938 Y84.012 E2.0568
G1 X115.468 Y83.873 E2.1104
G1 X116.98 Y83.775 E2.1633
G1 X118.476 Y83.717 E2.2156
G1 X120.012 Y83.697 E2.2693
G0 X120.011 Y83.277 F7800
G92 E0
G1 X121.545 Y83.296 E0.0536 F1225
G1 X123.071 Y83.355 E0.1069
G1 X124.595 Y83.453 E0.1602
G1 X126.116 Y83.59 E0.2136
G1 X127.633 Y83.767 E0.2669
G1 X129.126 Y83.979 E0.3196
G1 X129.361 Y84.033 E0.328
G1 X129.504 Y84.088 E0.3333
G1 X129.647 Y84.162 E0.339
G1 X129.775 Y84.248 E0.3443
G1 X129.942 Y84.399 E0.3522
G1 X130.042 Y84.517 E0.3576
G1 X130.124 Y84.641 E0.3628
G1 X130.241 Y84.897 E0.3726
G1 X130.489 Y85.908 E0.409
G1 X130.668 Y86.82 E0.4415
G1 X130.817 Y87.766 E0.4749
G1 X130.926 Y88.694 E0.5075
G1 X131.001 Y89.645 E0.5408
G1 X131.038 Y90.589 E0.5738
G1 X131.038 Y91.532 E0.6068
G1 X131.002 Y92.477 E0.6398
G1 X130.929 Y93.419 E0.6728
G1 X130.82 Y94.358 E0.7058
G1 X130.675 Y95.291 E0.7388
G1 X130.493 Y96.218 E0.7718
G1 X130.278 Y97.126 E0.8044
G1 X130.223 Y97.3 E0.8107
G1 X130.158 Y97.445 E0.8163
G1 X130.075 Y97.582 E0.8219
G1 X129.978 Y97.707 E0.8274
G1 X129.867 Y97.821 E0.833
G1 X129.743 Y97.921 E0.8385
G1 X129.607 Y98.007 E0.8441
G1 X129.464 Y98.075 E0.8497
G1 X129.313 Y98.127 E0.8552
G1 X129.143 Y98.163 E0.8613
G1 X127.665 Y98.374 E0.9135
G1 X126.148 Y98.551 E0.9668
G1 X124.568 Y98.694 E1.0222
G1 X123.084 Y98.789 E1.0741
G1 X121.577 Y98.848 E1.1268
G1 X120.031 Y98.868 E1.1808
G1 X118.497 Y98.849 E1.2344
G1 X116.971 Y98.79 E1.2877
G1 X115.447 Y98.692 E1.341
G1 X113.927 Y98.555 E1.3943
G1 X112.411 Y98.379 E1.4476
G1 X110.79 Y98.141 E1.5049
G1 X110.587 Y98.077 E1.5123
G1 X110.396 Y97.983 E1.5197
G1 X110.222 Y97.86 E1.5272
G1 X110.064 Y97.706 E1.5349
G1 X109.97 Y97.586 E1.5402
G1 X109.892 Y97.458 E1.5454
G1 X109.782 Y97.188 E1.5556
G1 X109.555 Y96.242 E1.5896
G1 X109.372 Y95.316 E1.6225
G1 X109.224 Y94.37 E1.656
G1 X109.114 Y93.432 E1.6889
G1 X109.042 Y92.502 E1.7215
G1 X109.005 Y91.558 E1.7545
G1 X109.004 Y90.613 E1.7875
G1 X109.04 Y89.67 E1.8205
G1 X109.113 Y88.728 E1.8535
G1 X109.223 Y87.78 E1.8868
G1 X109.369 Y86.845 E1.9199
G1 X109.551 Y85.918 E1.9528
G1 X109.762 Y85.028 E1.9848
G1 X109.842 Y84.789 E1.9936
G1 X109.911 Y84.653 E1.9989
G1 X109.998 Y84.52 E2.0045
G1 X110.1 Y84.398 E2.01
G1 X110.216 Y84.289 E2.0156
G1 X110.344 Y84.194 E2.0211
G1 X110.477 Y84.117 E2.0265
G1 X110.684 Y84.032 E2.0343
G1 X110.835 Y83.993 E2.0398
G1 X112.378 Y83.771 E2.0942
G1 X113.895 Y83.594 E2.1475
G1 X115.435 Y83.454 E2.2015
G1 X116.958 Y83.356 E2.2549
G1 X118.465 Y83.297 E2.3075
G1 X120.011 Y83.277 E2.3615
G0 X120.011 Y82.857 F7800
G92 E0
G1 X121.556 Y82.876 E0.0539 F1050
G1 X123.093 Y82.936 E0.1076
G1 X124.628 Y83.034 E0.1614
G1 X126.159 Y83.173 E0.2151
G1 X127.687 Y83.35 E0.2688
G1 X129.203 Y83.566 E0.3223
G1 X129.483 Y83.63 E0.3323
G1 X129.676 Y83.703 E0.3395
G1 X129.863 Y83.8 E0.3468
G1 X130.034 Y83.917 E0.3541
G1 X130.244 Y84.105 E0.3639
G1 X130.378 Y84.264 E0.3712
G1 X130.492 Y84.437 E0.3784
G1 X130.639 Y84.758 E0.3908
G1 X130.899 Y85.818 E0.4289
G1 X131.082 Y86.747 E0.4619
G1 X131.233 Y87.709 E0.4959
G1 X131.344 Y88.653 E0.5291
G1 X131.42 Y89.62 E0.563
G1 X131.458 Y90.58 E0.5966
G1 X131.458 Y91.54 E0.6301
G1 X131.421 Y92.501 E0.6637
G1 X131.347 Y93.46 E0.6973
G1 X131.236 Y94.414 E0.7308
G1 X131.088 Y95.364 E0.7644
G1 X130.904 Y96.307 E0.7979
G1 X130.684 Y97.238 E0.8314
G1 X130.616 Y97.451 E0.8392
G1 X130.53 Y97.641 E0.8465
G1 X130.422 Y97.82 E0.8537
G1 X130.295 Y97.984 E0.861
G1 X130.15 Y98.132 E0.8683
G1 X129.987 Y98.263 E0.8755
G1 X129.81 Y98.375 E0.8828
G1 X129.623 Y98.465 E0.8901
G1 X129.425 Y98.532 E0.8974
G1 X129.218 Y98.577 E0.9048
G1 X127.718 Y98.791 E0.9577
G1 X126.191 Y98.969 E1.0114
G1 X124.601 Y99.112 E1.0672
G1 X123.105 Y99.209 E1.1195
G1 X121.589 Y99.268 E1.1725
G1 X120.031 Y99.288 E1.2269
G1 X118.486 Y99.269 E1.2809
G1 X116.95 Y99.209 E1.3345
G1 X115.415 Y99.111 E1.3883
G1 X113.884 Y98.973 E1.442
G1 X112.356 Y98.795 E1.4957
G1 X110.696 Y98.552 E1.5543
G1 X110.43 Y98.468 E1.564
G1 X110.18 Y98.345 E1.5737
G1 X109.952 Y98.184 E1.5835
G1 X109.75 Y97.987 E1.5933
G1 X109.623 Y97.824 E1.6005
G1 X109.516 Y97.648 E1.6077
G1 X109.381 Y97.317 E1.6202
G1 X109.144 Y96.331 E1.6556
G1 X108.959 Y95.389 E1.6892
G1 X108.808 Y94.427 E1.7232
G1 X108.696 Y93.473 E1.7567
G1 X108.623 Y92.527 E1.7899
G1 X108.585 Y91.567 E1.8234
G1 X108.584 Y90.605 E1.857
G1 X108.621 Y89.646 E1.8905
G1 X108.695 Y88.688 E1.9241
G1 X108.807 Y87.724 E1.958
G1 X108.956 Y86.772 E1.9916
G1 X109.141 Y85.829 E2.0252
G1 X109.358 Y84.912 E2.0581
G1 X109.454 Y84.627 E2.0686
G1 X109.546 Y84.442 E2.0758
G1 X109.66 Y84.269 E2.083
G1 X109.794 Y84.11 E2.0903
G1 X109.945 Y83.967 E2.0976
G1 X110.112 Y83.843 E2.1048
G1 X110.292 Y83.739 E2.1121
G1 X110.552 Y83.633 E2.1219
G1 X110.753 Y83.581 E2.1291
G1 X112.324 Y83.354 E2.1846
G1 X113.851 Y83.176 E2.2383
G1 X115.403 Y83.035 E2.2927
G1 X116.937 Y82.936 E2.3464
G1 X118.454 Y82.877 E2.3994
G1 X120.011 Y82.857 E2.4538
G92 E0
G1 E-1 F1800
G0 Z0.48 F1000
G0 X111.604 Y86.087 F7800
G0 Z0.08 F1000
G1 E0 F1800
G92 E0
G1 X111.776 Y85.916 E0.0085 F2100
G1 X112.47 Y85.816 E0.0329
G1 X111.446 Y86.839 E0.0835
G1 X111.376 Y87.198 E0.0963
G1 X111.319 Y87.56 E0.1091
G1 X113.148 Y85.732 E0.1994
G1 X113.82 Y85.653 E0.223
G1 X111.219 Y88.255 E0.3515
G1 X111.141 Y88.924 E0.375
G1 X111.141 Y88.927 E0.3751
G1 X114.481 Y85.586 E0.5401
G1 X115.135 Y85.527 E0.563
G1 X111.091 Y89.57 E0.7627
G1 X111.074 Y89.787 E0.7703
G1 X111.059 Y90.197 E0.7846
G1 X115.782 Y85.473 E1.0179
G1 X116.417 Y85.432 E1.0401
G1 X111.041 Y90.808 E1.3056
G1 X111.042 Y91.402 E1.3264
G1 X117.052 Y85.391 E1.6232
G1 X117.064 Y85.39 E1.6236
G1 X117.671 Y85.367 E1.6448
G1 X111.06 Y91.977 E1.9713
G1 X111.076 Y92.383 E1.9855
G1 X111.088 Y92.543 E1.9911
G1 X118.289 Y85.343 E2.3467
G1 X118.518 Y85.334 E2.3547
G1 X118.896 Y85.329 E2.368
G1 X111.131 Y93.094 E2.7515
G1 X111.142 Y93.235 E2.7564
G1 X111.188 Y93.631 E2.7703
G1 X119.498 Y85.321 E3.1807
G1 X120.012 Y85.314 E3.1987
G1 X120.098 Y85.315 E3.2017
G1 X111.253 Y94.16 E3.6385
G1 X111.333 Y94.674 E3.6567
G1 X120.685 Y85.322 E4.1185
G1 X121.271 Y85.33 E4.139
G1 X111.422 Y95.18 E4.6255
G1 X111.519 Y95.676 E4.6431
G1 X121.849 Y85.346 E5.1533
G1 X122.42 Y85.369 E5.1733
G1 X111.63 Y96.159 E5.7062
G1 X111.641 Y96.207 E5.7079
G1 X112.108 Y96.275 E5.7244
G1 X122.992 Y85.391 E6.262
G1 X123.55 Y85.427 E6.2815
G1 X112.626 Y96.351 E6.821
G1 X112.677 Y96.359 E6.8228
G1 X113.156 Y96.414 E6.8397
G1 X124.108 Y85.463 E7.3806
G1 X124.438 Y85.484 E7.3921
G1 X124.661 Y85.504 E7.3999
G1 X113.689 Y96.476 E7.9418
G1 X114.136 Y96.528 E7.9575
G1 X114.223 Y96.536 E7.9606
G1 X125.205 Y85.553 E8.503
G1 X125.75 Y85.603 E8.5221
G1 X114.768 Y96.585 E9.0645
G1 X115.312 Y96.634 E9.0836
G1 X126.286 Y85.661 E9.6256
G1 X126.818 Y85.723 E9.6443
G1 X115.863 Y96.677 E10.1854
G1 X116.421 Y96.713 E10.2049
G1 X127.35 Y85.785 E10.7446
G1 X127.372 Y85.787 E10.7454
G1 X127.871 Y85.858 E10.763
G1 X116.979 Y96.749 E11.3009
G1 X117.076 Y96.756 E11.3043
G1 X117.549 Y96.774 E11.3208
G1 X128.391 Y85.932 E11.8563
G1 X128.398 Y85.933 E11.8565
G1 X128.5 Y86.348 E11.8714
G1 X128.511 Y86.406 E11.8735
G1 X118.121 Y96.796 E12.3866
G1 X118.55 Y96.812 E12.4016
G1 X118.696 Y96.814 E12.4068
G1 X128.609 Y86.902 E12.8963
G1 X128.662 Y87.175 E12.906
G1 X128.699 Y87.406 E12.9142
G1 X119.283 Y96.822 E13.3792
G1 X119.869 Y96.829 E13.3997
G1 X128.779 Y87.919 E13.8397
G1 X128.799 Y88.043 E13.8441
G1 X128.846 Y88.446 E13.8583
G1 X120.467 Y96.825 E14.2721
G1 X121.069 Y96.817 E14.2931
G1 X128.905 Y88.981 E14.6802
G1 X128.949 Y89.532 E14.6995
G1 X121.675 Y96.805 E15.0587
G1 X122.293 Y96.781 E15.0803
G1 X128.98 Y90.095 E15.4105
G1 X129.001 Y90.629 E15.4292
G1 X129.001 Y90.668 E15.4306
G1 X122.911 Y96.758 E15.7313
G1 X122.979 Y96.755 E15.7337
G1 X123.544 Y96.718 E15.7535
G1 X129.001 Y91.261 E16.023
G1 X129.001 Y91.494 E16.0311
G1 X128.987 Y91.87 E16.0443
G1 X124.179 Y96.678 E16.2817
G1 X124.411 Y96.663 E16.2899
G1 X124.825 Y96.625 E16.3044
G1 X128.958 Y92.493 E16.5085
G1 X128.908 Y93.136 E16.531
G1 X125.478 Y96.566 E16.7004
G1 X125.939 Y96.525 E16.7166
G1 X126.137 Y96.502 E16.7235
G1 X128.834 Y93.805 E16.8567
G1 X128.801 Y94.083 E16.8665
G1 X128.737 Y94.495 E16.8811
G1 X126.809 Y96.423 E16.9763
G1 X127.402 Y96.354 E16.9972
G1 X127.484 Y96.342 E17.0001
G1 X128.615 Y95.212 E17.0559
G1 X128.502 Y95.788 E17.0764
G1 X128.461 Y95.959 E17.0826
G1 X128.177 Y96.244 E17.0966
G1 X128.402 Y96.211 E17.1045
G1 X128.461 Y95.959 E17.1136
G92 E0
G1 E-1 F1800
G0 Z0.68 F1000
; layer 3, Z = 0.28
; tool H0.2 W0.42
M104 S185 T0
M106 S255
G0 X119.007 Y81.207 F7800
G0 Z0.28 F1000
G1 E0 F1800
G92 E0
G1 X121.435 Y81.215 E0.0848 F2400
G1 X123.464 Y81.296 E0.1557
G1 X125.631 Y81.447 E0.2316
G1 X126.097 Y81.278 E0.2489
G1 X126.344 Y81.467 E0.2597
G1 X126.709 Y81.565 E0.2729
G1 X127.437 Y81.649 E0.2985
G1 X127.776 Y81.627 E0.3104
G1 X128.09 Y81.512 E0.3221
G1 X128.334 Y81.701 E0.3328
G1 X128.688 Y81.815 E0.3458
G1 X129.416 Y81.925 E0.3716
G1 X129.985 Y82.061 E0.392
G1 X130.489 Y82.272 E0.4111
G1 X131.008 Y82.595 E0.4324
G1 X131.459 Y83.004 E0.4537
G1 X131.791 Y83.426 E0.4724
G1 X132.085 Y83.966 E0.4939
G1 X132.271 Y84.503 E0.5137
G1 X132.649 Y86.213 E0.5749
G1 X132.896 Y87.793 E0.6308
G1 X133.047 Y89.387 E0.6867
G1 X133.099 Y90.985 E0.7425
G1 X133.047 Y92.763 E0.8046
G1 X132.896 Y94.354 E0.8604
G1 X132.616 Y96.108 E0.9225
G1 X132.249 Y97.712 E0.9799
G1 X132.085 Y98.183 E0.9974
G1 X131.828 Y98.66 E1.0163
G1 X131.408 Y99.196 E1.0401
G1 X131.011 Y99.551 E1.0587
G1 X130.489 Y99.876 E1.0801
G1 X129.985 Y100.087 E1.0992
G1 X129.416 Y100.224 E1.1197
G1 X128.733 Y100.327 E1.1438


...


G1 X114.886 Y90.213 E0.8468
G1 X115.009 Y89.984 E0.8559
G1 X115.104 Y89.729 E0.8654
G1 X115.145 Y89.545 E0.872
G1 X115.171 Y89.283 E0.8812
G1 X115.149 Y89.027 E0.8902
G1 X115.079 Y88.73 E0.9008
G1 X115.008 Y88.544 E0.9078
G1 X114.899 Y88.339 E0.9159
G1 X114.759 Y88.136 E0.9245
G1 X114.564 Y87.915 E0.9348
G1 X114.28 Y87.661 E0.9481
G1 X113.922 Y87.43 E0.963
G1 X113.633 Y87.3 E0.974
G1 X113.262 Y87.203 E0.9875
G1 X112.8 Y87.157 E1.0037
G1 X112.498 Y87.207 E1.0143
G1 X112.289 Y87.285 E1.0221
G1 X112.069 Y87.422 E1.0312
G1 X111.907 Y87.586 E1.0392
G1 X111.756 Y87.858 E1.0501
G1 X111.547 Y88.556 E1.0755
G1 X111.423 Y88.76 E1.0839
G1 X111.347 Y88.829 E1.0875
G1 X111.268 Y88.872 E1.0906
G1 X111.229 Y88.883 E1.092
G1 X111.03 Y88.907 E1.099
G1 X110.887 Y88.884 E1.1041
G1 X110.775 Y88.823 E1.1085
G1 X110.705 Y88.761 E1.1118
G1 X110.642 Y88.681 E1.1154
G1 X110.587 Y88.569 E1.1197
G1 X110.558 Y88.451 E1.1239
G1 X110.552 Y88.311 E1.1289
G1 X110.579 Y88.151 E1.1345
G1 X110.692 Y87.882 E1.1447
G1 X110.788 Y87.741 E1.1507
G1 X110.921 Y87.595 E1.1576
G1 X111.195 Y87.373 E1.1699
G1 X111.367 Y87.262 E1.177
G1 X111.573 Y87.16 E1.185
G1 X111.955 Y87.036 E1.1991
G1 X112.061 Y87.014 E1.2028
G1 X112.331 Y86.972 E1.2124
G1 X112.633 Y86.955 E1.223
G1 X113.014 Y86.976 E1.2363
G1 X113.264 Y87.007 E1.2451
G1 X113.621 Y87.078 E1.2578
G1 X114.085 Y87.225 E1.2748
G1 X114.566 Y87.451 E1.2933
G1 X114.873 Y87.638 E1.3059
G92 E0
G1 E-1 F1800
G0 Z2.68 F1000
; layer 22, Z = 2.08
G0 X120.021 Y90.877 F7800
G0 Z2.08 F1000
G1 E0 F1800
G92 E0
G1 X120.454 Y90.93 E0.0152 F560
G1 X120.638 Y91.127 E0.0247
G1 X120.533 Y91.203 E0.0292
G1 X120.519 Y91.208 E0.0297
G1 X120.021 Y91.268 E0.0472
G1 X119.523 Y91.208 E0.0647
G1 X119.509 Y91.203 E0.0653
G1 X119.354 Y91.092 E0.0719
G1 X119.349 Y91.073 E0.0726
G1 X119.354 Y91.054 E0.0733
G1 X119.509 Y90.943 E0.08
G1 X119.523 Y90.938 E0.0805
G1 X120.021 Y90.877 E0.098
G0 X120.021 Y90.454 F7800
G92 E0
G1 X120.618 Y90.527 E0.021 F490
G1 X120.67 Y90.546 E0.0229
G1 X120.999 Y90.899 E0.0398
G1 X121.14 Y91.152 E0.0499
G1 X121.111 Y91.255 E0.0537
G1 X121.095 Y91.293 E0.0551
G1 X121.06 Y91.341 E0.0572
G1 X120.731 Y91.577 E0.0713
G1 X120.618 Y91.619 E0.0755
G1 X120.021 Y91.692 E0.0965
G1 X119.424 Y91.619 E0.1175
G1 X119.31 Y91.577 E0.1218
G1 X118.982 Y91.342 E0.1359
G1 X118.981 Y91.341 E0.1359
G1 X118.918 Y91.073 E0.1455
G1 X118.981 Y90.805 E0.1552
G1 X118.982 Y90.804 E0.1552
G1 X119.311 Y90.568 E0.1693
G1 X119.424 Y90.526 E0.1735
G1 X120.021 Y90.454 E0.1945
G0 X120.021 Y90.031 F7800
G92 E0
G1 X120.717 Y90.116 E0.0245 F420
G1 X120.909 Y90.186 E0.0316
G1 X121.342 Y90.65 E0.0538
G1 X121.591 Y91.099 E0.0717
G1 X121.508 Y91.397 E0.0825
G1 X121.462 Y91.502 E0.0865
G1 X121.362 Y91.642 E0.0925
G1 X120.93 Y91.952 E0.1111
G1 X120.717 Y92.03 E0.119
G1 X120.021 Y92.115 E0.1435
G1 X119.325 Y92.03 E0.168
G1 X119.112 Y91.952 E0.1759
G1 X118.681 Y91.643 E0.1944
G1 X118.591 Y91.517 E0.1998
G1 X118.486 Y91.073 E0.2158
G1 X118.591 Y90.628 E0.2317
G1 X118.681 Y90.503 E0.2371
G1 X119.113 Y90.193 E0.2557
G1 X119.325 Y90.115 E0.2636
G1 X120.021 Y90.031 E0.2881
G92 E0
G1 E-1 F1800
; layer 23, Z = 2.28
G0 X115.58 Y89.121 F7800
G0 Z2.28 F1000
G1 E0 F1800
G92 E0
G1 X115.629 Y89.254 E0.0049 F490
G1 X115.671 Y89.427 E0.0112
G1 X115.702 Y89.75 E0.0225
G1 X115.689 Y89.876 E0.0269
G1 X115.599 Y90.208 E0.039
G1 X115.507 Y90.413 E0.0468
G1 X115.397 Y90.598 E0.0543
G1 X115.17 Y90.906 E0.0676
G1 X114.799 Y91.328 E0.0873
G1 X114.146 Y92.003 E0.1201
G1 X113.96 Y92.219 E0.13
G1 X113.762 Y92.482 E0.1415
G1 X113.58 Y92.825 E0.1551
G1 X113.484 Y93.161 E0.1673
G1 X113.452 Y93.473 E0.1783
G1 X113.427 Y93.406 E0.1808
G1 X113.39 Y93.234 E0.1869
G1 X113.374 Y93.092 E0.1919
G1 X113.385 Y92.932 E0.1975
G1 X113.411 Y92.76 E0.2036
G1 X113.478 Y92.551 E0.2112
G1 X113.556 Y92.387 E0.2176
G1 X113.654 Y92.218 E0.2244
G1 X113.928 Y91.901 E0.239
G1 X114.09 Y91.731 E0.2472
G1 X114.886 Y90.912 E0.2871
G1 X115.076 Y90.683 E0.2975
G1 X115.252 Y90.422 E0.3085
G1 X115.439 Y90.049 E0.3231
G1 X115.534 Y89.745 E0.3342
G1 X115.595 Y89.288 E0.3503
G1 X115.58 Y89.121 E0.3562
G92 E0
G1 E-1 F1800
G0 Z2.68 F1000
G0 X115.098 Y87.81 F7800
G0 Z2.28 F1000
G1 E0 F1800
G92 E0
G1 X115.439 Y88.12 E0.0161 F420
G1 X115.668 Y88.399 E0.0287
G1 X115.74 Y88.509 E0.0333
G1 X115.952 Y88.914 E0.0493
G1 X116.032 Y89.132 E0.0574
G1 X116.086 Y89.357 E0.0655
G1 X116.124 Y89.751 E0.0793
G1 X116.104 Y89.953 E0.0864
G1 X115.995 Y90.351 E0.1008
G1 X115.88 Y90.606 E0.1105
G1 X115.748 Y90.83 E0.1196
G1 X115.498 Y91.169 E0.1344
G1 X115.108 Y91.613 E0.155
G1 X114.457 Y92.287 E0.1877
G1 X114.287 Y92.483 E0.1968
G1 X114.118 Y92.708 E0.2066
G1 X113.972 Y92.984 E0.2175
G1 X113.898 Y93.241 E0.2268
G1 X113.865 Y93.562 E0.2381
G1 X113.905 Y93.94 E0.2514
G1 X114.016 Y94.277 E0.2638
G1 X114.158 Y94.525 E0.2737
G1 X114.394 Y94.807 E0.2866
G1 X114.718 Y95.07 E0.3012
G1 X114.948 Y95.197 E0.3103
G1 X115.188 Y95.284 E0.3193
G1 X115.546 Y95.339 E0.3319
G1 X115.836 Y95.326 E0.3421
G1 X116.084 Y95.263 E0.351
G1 X116.318 Y95.132 E0.3604
G1 X116.476 Y94.98 E0.368
G1 X116.627 Y94.747 E0.3777
G1 X116.712 Y94.49 E0.3872
G1 X116.743 Y94.157 E0.3988
G1 X116.716 Y93.549 E0.4201
G1 X116.688 Y93.203 E0.4322
G1 X116.884 Y93.203 E0.439
G1 X116.983 Y93.877 E0.4628
G1 X117.098 Y94.528 E0.4859
G1 X117.214 Y95.001 E0.5029
G1 X117.309 Y95.322 E0.5146
G1 X116.406 Y95.461 E0.5465
G1 X115.974 Y95.502 E0.5617
G1 X115.742 Y95.507 E0.5698
G1 X115.229 Y95.456 E0.5878
G1 X114.811 Y95.353 E0.6028
G1 X114.424 Y95.191 E0.6175
G1 X114.031 Y94.944 E0.6337
G1 X113.745 Y94.703 E0.6468
G1 X113.554 Y94.502 E0.6564
G1 X113.375 Y94.271 E0.6666
G1 X113.289 Y94.139 E0.6721
G1 X113.162 Y93.901 E0.6816
G1 X113.023 Y93.523 E0.6956
G1 X112.975 Y93.301 E0.7035
G1 X112.953 Y93.101 E0.7106
G1 X112.967 Y92.887 E0.7181
G1 X113.001 Y92.664 E0.726
G1 X113.087 Y92.396 E0.7358
G1 X113.184 Y92.191 E0.7437
G1 X113.31 Y91.973 E0.7525
G1 X113.617 Y91.619 E0.7689
G1 X113.787 Y91.44 E0.7775
G1 X114.574 Y90.631 E0.8169
G1 X114.739 Y90.431 E0.826
G1 X114.889 Y90.209 E0.8353
G1 X115.049 Y89.891 E0.8477
G1 X115.123 Y89.654 E0.8564
G1 X115.172 Y89.278 E0.8697
G1 X115.153 Y89.05 E0.8777
G1 X115.065 Y88.684 E0.8908
G1 X114.92 Y88.368 E0.9029
G1 X114.696 Y88.05 E0.9165
G1 X114.371 Y87.714 E0.9328
G1 X114.135 Y87.526 E0.9434
G1 X113.959 Y87.411 E0.9507
G1 X113.702 Y87.277 E0.9609
G1 X113.399 Y87.162 E0.9722
G1 X113.204 Y87.117 E0.9791
G1 X113.261 Y87.113 E0.9811
G1 X113.471 Y87.124 E0.9885
G1 X113.769 Y87.176 E0.999
G1 X114.109 Y87.274 E1.0114
G1 X114.367 Y87.376 E1.0211
G1 X114.696 Y87.543 E1.034
G1 X115.098 Y87.81 E1.0508
G92 E0
G1 E-1 F1800
G0 Z2.88 F1000
; layer 24, Z = 2.48
G0 X119.708 Y92.59 F7800
G0 Z2.48 F1000
G1 E0 F1800
G92 E0
G1 X119.86 Y92.608 E0.0053 F420
G1 X119.962 Y92.654 E0.0092
G1 X120.044 Y92.729 E0.0131
G1 X120.095 Y92.804 E0.0163
G1 X120.125 Y92.882 E0.0192
G1 X120.131 Y92.942 E0.0213
G1 X120.127 Y92.972 E0.0224
G1 X120.034 Y93.216 E0.0315
G1 X119.947 Y93.392 E0.0384
G1 X119.882 Y93.583 E0.0454
G1 X119.854 Y93.763 E0.0518
G1 X119.868 Y94.002 E0.0601
G1 X119.913 Y94.201 E0.0672
G1 X119.962 Y94.32 E0.0717
G1 X119.857 Y94.325 E0.0754
G1 X119.785 Y94.271 E0.0786
G1 X119.625 Y94.074 E0.0874
G1 X119.495 Y93.844 E0.0966
G1 X119.404 Y93.584 E0.1063
G1 X119.373 Y93.458 E0.1108
G1 X119.346 Y93.235 E0.1186
G1 X119.357 Y93.039 E0.1255
G1 X119.381 Y92.92 E0.1297
G1 X119.481 Y92.722 E0.1375
G1 X119.514 Y92.683 E0.1393
G1 X119.586 Y92.625 E0.1425
G1 X119.68 Y92.593 E0.146
G1 X119.708 Y92.59 E0.147
G92 E0
G1 E-1 F1800
G0 Z2.88 F1000
G0 X121.103 Y88.462 F7800
G0 Z2.48 F1000
G1 E0 F1800
G92 E0
G1 X121.258 Y88.468 E0.0054 F490
G1 X121.663 Y89.921 E0.0581
G1 X122.079 Y91.558 E0.1171
G1 X122.219 Y91.796 E0.1267
G1 X122.516 Y92.01 E0.1395
G1 X122.825 Y92.056 E0.1504
G1 X122.662 Y92.165 E0.1573
G1 X122.499 Y92.419 E0.1678
G1 X122.424 Y92.721 E0.1787
G1 X122.54 Y93.293 E0.1991
G1 X122.496 Y93.317 E0.2008
G1 X122.343 Y92.858 E0.2177
G1 X122.109 Y92.061 E0.2467
G1 X121.531 Y89.928 E0.3239
G1 X121.103 Y88.462 E0.3772
G92 E0
G1 E-1 F1800
G0 Z2.88 F1000
G0 X120.139 Y87.939 F7800
G0 Z2.48 F1000
G1 E0 F1800
G92 E0
G1 X120.92 Y88.035 E0.0275 F420
G1 X121.293 Y88.049 E0.0405
G1 X121.735 Y88.041 E0.0559
G1 X121.785 Y88.057 E0.0578
G1 X121.616 Y88.19 E0.0653
G1 X122.069 Y89.813 E0.1241
G1 X122.471 Y91.396 E0.1812
G1 X122.536 Y91.506 E0.1856
G1 X122.679 Y91.61 E0.1918
G1 X122.869 Y91.638 E0.1985
G1 X123.015 Y91.591 E0.2039
G1 X123.144 Y91.472 E0.21
G1 X123.593 Y90.512 E0.247
G1 X124.028 Y89.478 E0.2862
G1 X124.154 Y89.631 E0.2931
G1 X124.214 Y89.75 E0.2978
G1 X124.297 Y89.85 E0.3023
G1 X124.443 Y90.172 E0.3147
G1 X124.403 Y90.388 E0.3224
G1 X124.246 Y90.896 E0.3409
G1 X124.101 Y91.265 E0.3548
G1 X124.017 Y91.437 E0.3615
G1 X123.796 Y91.799 E0.3763
G1 X123.426 Y92.285 E0.3976
G1 X123.983 Y92.68 E0.4214
G1 X124.012 Y92.705 E0.4228
G1 X123.796 Y92.589 E0.4314
G1 X123.479 Y92.391 E0.4444
G1 X123.326 Y92.336 E0.4501
G1 X123.127 Y92.359 E0.4571
G1 X122.969 Y92.466 E0.4637
G1 X122.89 Y92.587 E0.4688
G1 X122.855 Y92.73 E0.4739
G1 X122.962 Y93.26 E0.4928
G1 X123.003 Y93.486 E0.5008
G1 X123.007 Y93.547 E0.503
G1 X122.859 Y93.6 E0.5084
G1 X122.349 Y93.87 E0.5286
G1 X122.26 Y93.905 E0.5319
G1 X122.229 Y93.842 E0.5344
G1 X121.942 Y92.983 E0.566
G1 X121.705 Y92.175 E0.5954
G1 X121.127 Y90.042 E0.6726
G1 X120.706 Y88.604 E0.725
G1 X120.583 Y88.347 E0.7349
G1 X120.456 Y88.169 E0.7425
G1 X120.331 Y88.048 E0.7486
G1 X120.139 Y87.939 E0.7563
G92 E0
G1 E-1 F1800
G0 Z2.88 F1000
G0 X116.823 Y93.273 F7800
G0 Z2.48 F1000
G1 E0 F1800
G92 E0
G1 X116.825 Y93.284 E0.0004 F420
G1 X116.838 Y93.47 E0.0069
G1 X116.833 Y93.468 E0.0071
G1 X116.797 Y93.338 E0.0118
G1 X116.787 Y93.274 E0.0141
G1 X116.823 Y93.273 E0.0153
G92 E0
G1 E-1 F1800
G0 Z2.88 F1000
G0 X116.008 Y89.44 F7800
G0 Z2.48 F1000
G1 E0 F1800
G92 E0
G1 X116.057 Y89.753 E0.0111 F420
G1 X116.02 Y90.07 E0.0222
G1 X115.947 Y90.316 E0.0312
G1 X115.835 Y90.564 E0.0406
G1 X115.695 Y90.794 E0.0501
G1 X115.426 Y91.123 E0.0649
G1 X115.418 Y91.132 E0.0653
G1 X115.416 Y91.002 E0.0699
G1 X115.406 Y90.978 E0.0708
G1 X115.434 Y90.708 E0.0802
G1 X115.455 Y90.674 E0.0817
G1 X115.56 Y90.168 E0.0997
G1 X115.594 Y90.088 E0.1027
G1 X115.857 Y89.704 E0.119
G1 X116.008 Y89.44 E0.1296
G92 E0
G1 E-1 F1800
; layer end
M104 S0 T0 ; turn off extruder 0
M104 S0 T1 ; turn off extruder 0
M140 S0 ; turn off bed
G28 X0;
G28 Y0;
M84 ; disable motors
; Build Summary
;   Build time: 6.59 min (0.11 hr)
;   Plastic volume: 1118.22 mm^3 (1.12 cc)
;   Filament length: 464.9 mm
;   Material cost: $0.05 (€0.04)
Attachments
1 Extruder selected in both processes
1 Extruder selected in both processes
The outer rim and the letters are a seperate STL, assigned to ex1
The outer rim and the letters are a seperate STL, assigned to ex1

Formatize
Posts: 16
Joined: Thu May 29, 2014 5:17 pm

Post by Formatize »

Legion 2.3 wrote:I bought Simplify3d a few days ago and did some nice prints with it, so i started to print with 2 extruders. The first print was successful, but ONLY the first print.

Now, everytime i use multiple processes, the G-Code is buggy: If i have 2 STLs of 1 object and assign the 2 processes to the two STLs (1 for each), the first 2 layers print as expected, but then, the whole of the next layers are printed with the same extruder (ex0 or ex1). Even if i seperate the 2 STLs from each other (they´re not touching in the preview), the same happens.

Another strange thing is: Even if I assing both processes to extruder 0, only the first 2 layers are printed with this extruder, the next ones are printed with ex1. The only workarround is to delete the 2nd extruder, but then, I can´t print with 2 materials.

I´m currently using a customized .fff - profile with some additional G-code for the beginning and the end of the print, but nothing for the tool-change.
I´ve already tried the predefined Felix 3.0 single - profile and just changed the extruder toolhead index for the 2nd process to 1, but it´s not any better.

I´ve already tried this with other STLs.

S3d just seems to "forget" to include the tool change code in the G-code or randomly adds this code.

As mentioned above, it worked one time.

Any ideas?

Here´s a part of the G-Code (The entire code is too large to post)

Code: Select all

; G-Code generated by Simplify3D(TM) Version 2.1.0
; Jun 13, 2014 at 7:01:53 
G90 ; use absolute coordinates
M82 ; absolute extrusion distances
G21 ; set units to millimeters
M106 S0
M140 S55
M190 S55
M104 S200 T0
M109 S200 T0
G28 ; home all axes
G1 Z5 F5000;
G92 E0
G1 E-1 F1800
G0 Z0.48 F1000
; layer 1, Z = 0.08
T0
; tool H-1 W-1
M106 S0
T0
; tool H0.2 W0.42
G0 X99.257 Y77.527 F7800
G0 Z0.08 F1000
G1 E0 F540
G92 E0
G1 X100.723 Y75.674 E0.0825 F2100
G1 X102.463 Y74.096 E0.1646
G1 X103.951 Y73.141 E0.2263
G1 X104.144 Y72.862 E0.2381
G1 X105.482 Y71.496 E0.3049
G1 X107.013 Y70.4 E0.3707
G1 X108.667 Y69.585 E0.4351
G1 X110.487 Y69.039 E0.5014
G1 X112.39 Y68.816 E0.5683
G1 X114.254 Y68.916 E0.6335
G1 X116.084 Y69.318 E0.699
G1 X117.85 Y70.042 E0.7656
G1 X118.634 Y70.533 E0.7979
G1 X121.342 Y70.529 E0.8925
G1 X121.369 Y70.53 E0.8934
G1 X122.102 Y70.066 E0.9237
G1 X123.864 Y69.334 E0.9904
G1 X125.682 Y68.925 E1.0554
G1 X127.509 Y68.815 E1.1194
G1 X129.426 Y69.019 E1.1867
G1 X131.265 Y69.561 E1.2537
G1 X132.947 Y70.373 E1.3189
G1 X134.493 Y71.479 E1.3853
G1 X135.801 Y72.802 E1.4502
G1 X136.034 Y73.132 E1.4643
G1 X137.526 Y74.088 E1.5262
G1 X139.275 Y75.671 E1.6086
G1 X140.729 Y77.513 E1.6906
G1 X141.857 Y79.564 E1.7723
G1 X142.558 Y81.565 E1.8463
G1 X143.121 Y84.081 E1.9364
G1 X143.491 Y86.402 E2.0185
G1 X143.712 Y88.73 E2.1001
G1 X143.785 Y91.049 E2.1812
G1 X143.713 Y93.408 E2.2636
G1 X143.493 Y95.731 E2.3451
G1 X143.13 Y98.02 E2.426
G1 X142.561 Y100.57 E2.5172
G1 X141.872 Y102.552 E2.5905
G1 X140.738 Y104.621 E2.6729
G1 X139.285 Y106.467 E2.755
G1 X137.537 Y108.052 E2.8374
G1 X136.039 Y109.014 E2.8995
G1 X135.834 Y109.306 E2.912
G1 X134.532 Y110.636 E2.977
G1 X132.993 Y111.748 E3.0433
G1 X131.324 Y112.563 E3.1082
G1 X129.516 Y113.11 E3.1741
G1 X127.605 Y113.331 E3.2414
G1 X125.746 Y113.233 E3.3063
G1 X123.914 Y112.83 E3.3719
G1 X122.149 Y112.106 E3.4385
G1 X121.364 Y111.615 E3.4708
G1 X118.656 Y111.619 E3.5654
G1 X118.629 Y111.618 E3.5664
G1 X117.896 Y112.082 E3.5966
G1 X116.135 Y112.814 E3.6632
G1 X114.317 Y113.223 E3.7283
G1 X112.483 Y113.333 E3.7925
G1 X110.58 Y113.129 E3.8593
G1 X108.729 Y112.588 E3.9267
G1 X107.059 Y111.776 E3.9915
G1 X105.521 Y110.684 E4.0574
G1 X104.177 Y109.326 E4.1241
G1 X103.957 Y109.01 E4.1376
G1 X102.474 Y108.061 E4.1991
G1 X100.732 Y106.484 E4.2811
G1 X99.267 Y104.635 E4.3635
G1 X98.139 Y102.573 E4.4456
G1 X97.444 Y100.588 E4.519
G1 X96.878 Y98.072 E4.6091
G1 X96.506 Y95.741 E4.6915
G1 X96.288 Y93.413 E4.7732
G1 X96.215 Y91.097 E4.8541
G1 X96.287 Y88.745 E4.9363
G1 X96.505 Y86.423 E5.0177
G1 X96.869 Y84.123 E5.0991
G1 X97.441 Y81.574 E5.1903
G1 X98.125 Y79.607 E5.263
G1 X99.257 Y77.527 E5.3457
G0 X99.609 Y77.759 F7800
G92 E0
G1 X101.03 Y75.962 E0.08 F2100
G1 X102.72 Y74.43 E0.1597
G1 X104.248 Y73.449 E0.2231
G1 X104.469 Y73.131 E0.2366
G1 X105.757 Y71.816 E0.3009
G1 X107.23 Y70.761 E0.3642
G1 X108.822 Y69.977 E0.4261
G1 X110.573 Y69.452 E0.49
G1 X112.403 Y69.238 E0.5543
G1 X114.198 Y69.333 E0.6171
G1 X115.959 Y69.721 E0.6801
G1 X117.657 Y70.417 E0.7442
G1 X118.513 Y70.954 E0.7795
G1 X121.334 Y70.949 E0.878
G1 X121.484 Y70.955 E0.8832
G1 X122.297 Y70.44 E0.9168
G1 X123.992 Y69.736 E0.9809
G1 X125.741 Y69.342 E1.0435
G1 X127.5 Y69.237 E1.105
G1 X129.343 Y69.432 E1.1698
G1 X131.114 Y69.954 E1.2343
G1 X132.732 Y70.735 E1.297
G1 X134.219 Y71.8 E1.3609
G1 X135.478 Y73.073 E1.4234
G1 X135.739 Y73.441 E1.4392
G1 X137.27 Y74.422 E1.5027
G1 X138.967 Y75.959 E1.5826
G1 X140.378 Y77.746 E1.6622
G1 X141.472 Y79.736 E1.7414
G1 X142.153 Y81.681 E1.8134
G1 X142.708 Y84.16 E1.9022
G1 X143.074 Y86.455 E1.9833
G1 X143.293 Y88.756 E2.064
G1 X143.365 Y91.05 E2.1442
G1 X143.293 Y93.382 E2.2257
G1 X143.076 Y95.678 E2.3062
G1 X142.717 Y97.942 E2.3862
G1 X142.156 Y100.455 E2.4762
G1 X141.486 Y102.381 E2.5474
G1 X140.387 Y104.389 E2.6273
G1 X138.977 Y106.18 E2.7069
G1 X137.281 Y107.718 E2.7869
G1 X135.743 Y108.705 E2.8507
G1 X135.51 Y109.037 E2.8649
G1 X134.257 Y110.317 E2.9274
G1 X132.776 Y111.387 E2.9912
G1 X131.17 Y112.171 E3.0536
G1 X129.431 Y112.697 E3.1171
G1 X127.591 Y112.91 E3.1818
G1 X125.803 Y112.816 E3.2443
G1 X124.04 Y112.428 E3.3074
G1 X122.342 Y111.731 E3.3715
G1 X121.485 Y111.195 E3.4068
G1 X118.664 Y111.199 E3.5053
G1 X118.514 Y111.193 E3.5105
G1 X117.702 Y111.707 E3.5441
G1 X116.007 Y112.412 E3.6082
G1 X114.257 Y112.806 E3.6708
G1 X112.493 Y112.912 E3.7326
G1 X110.662 Y112.715 E3.7969
G1 X108.881 Y112.195 E3.8617
G1 X107.273 Y111.413 E3.9241
G1 X105.793 Y110.363 E3.9875
G1 X104.501 Y109.056 E4.0517
G1 X104.253 Y108.702 E4.0668
G1 X102.73 Y107.726 E4.1299
G1 X101.04 Y106.196 E4.2096
G1 X99.618 Y104.402 E4.2895
G1 X98.524 Y102.402 E4.3691
G1 X97.848 Y100.472 E4.4405
G1 X97.291 Y97.993 E4.5292
G1 X96.923 Y95.688 E4.6108
G1 X96.707 Y93.387 E4.6915
G1 X96.635 Y91.097 E4.7715
G1 X96.706 Y88.771 E4.8528
G1 X96.921 Y86.475 E4.9333
G1 X97.282 Y84.202 E5.0137
G1 X97.845 Y81.689 E5.1036
G1 X98.51 Y79.777 E5.1743
G1 X99.609 Y77.759 E5.2545
G92 E0
G1 E-1 F1800
G0 Z0.48 F1000
G0 X121.152 Y81.21 F7800
G0 Z0.08 F1000
G1 E0 F1800
G92 E0
G1 X123.473 Y81.296 E0.0811 F1400
G1 X125.65 Y81.447 E0.1573
G1 X126.089 Y81.277 E0.1738
G1 X126.38 Y81.478 E0.1861
G1 X126.717 Y81.566 E0.1983
G1 X127.465 Y81.651 E0.2246
G1 X127.861 Y81.612 E0.2385
G1 X128.077 Y81.505 E0.2469
G1 X128.141 Y81.574 E0.2502
G1 X128.545 Y81.789 E0.2662
G1 X129.413 Y81.924 E0.2968
G1 X130.005 Y82.067 E0.3181
G1 X130.538 Y82.295 E0.3384
G1 X131.017 Y82.601 E0.3582
G1 X131.445 Y82.989 E0.3784
G1 X131.798 Y83.435 E0.3982
G1 X132.071 Y83.932 E0.418
G1 X132.272 Y84.506 E0.4393
G1 X132.626 Y86.09 E0.496
G1 X132.891 Y87.75 E0.5547
G1 X133.048 Y89.405 E0.6127
G1 X133.1 Y91.054 E0.6703
G1 X133.048 Y92.739 E0.7292
G1 X132.892 Y94.389 E0.7871
G1 X132.633 Y96.02 E0.8448
G1 X132.271 Y97.643 E0.9029
G1 X132.077 Y98.203 E0.9235
G1 X131.798 Y98.712 E0.9438
G1 X131.448 Y99.157 E0.9636
G1 X131.02 Y99.545 E0.9837
G1 X130.539 Y99.853 E1.0037
G1 X130.018 Y100.076 E1.0235
G1 X129.414 Y100.224 E1.0452
G1 X128.614 Y100.345 E1.0735
G1 X128.155 Y100.554 E1.0911
G1 X128.09 Y100.626 E1.0945
G1 X127.718 Y100.511 E1.1081
G1 X127.409 Y100.503 E1.1189
G1 X126.545 Y100.606 E1.1493
G1 X126.076 Y100.857 E1.1678
G1 X125.618 Y100.701 E1.1847
G1 X123.475 Y100.85 E1.2597
G1 X121.375 Y100.935 E1.3332
G1 X118.85 Y100.939 E1.4213
G1 X116.555 Y100.852 E1.5015
G1 X114.348 Y100.701 E1.5788
G1 X113.908 Y100.872 E1.5953
G1 X113.636 Y100.676 E1.607
G1 X113.289 Y100.584 E1.6195
G1 X112.559 Y100.499 E1.6452
G1 X112.2 Y100.525 E1.6577
G1 X111.915 Y100.637 E1.6685
G1 X111.89 Y100.612 E1.6697
G1 X111.628 Y100.434 E1.6808
G1 X111.307 Y100.333 E1.6925
G1 X110.585 Y100.224 E1.718
G1 X109.994 Y100.081 E1.7393
G1 X109.462 Y99.854 E1.7595
G1 X108.983 Y99.547 E1.7793
G1 X108.554 Y99.159 E1.7995
G1 X108.201 Y98.713 E1.8194
G1 X107.93 Y98.217 E1.8391
G1 X107.728 Y97.641 E1.8604
G1 X107.372 Y96.058 E1.9171
G1 X107.107 Y94.399 E1.9758
G1 X106.952 Y92.744 E2.0338
G1 X106.9 Y91.093 E2.0915
G1 X106.952 Y89.408 E2.1504
G1 X107.106 Y87.758 E2.2083
G1 X107.364 Y86.129 E2.2659
G1 X107.728 Y84.505 E2.324
G1 X107.924 Y83.944 E2.3447
G1 X108.2 Y83.436 E2.3649
G1 X108.552 Y82.992 E2.3847
G1 X108.98 Y82.604 E2.4049
G1 X109.461 Y82.295 E2.4249
G1 X109.98 Y82.072 E2.4446
G1 X110.586 Y81.924 E2.4664
G1 X111.389 Y81.803 E2.4947
G1 X111.883 Y81.574 E2.5138
G1 X111.931 Y81.512 E2.5165
G1 X112.247 Y81.638 E2.5284
G1 X112.606 Y81.644 E2.5409
G1 X113.425 Y81.54 E2.5697
G1 X113.735 Y81.413 E2.5814
G1 X113.899 Y81.28 E2.5888
G1 X114.384 Y81.448 E2.6067
G1 X116.522 Y81.296 E2.6816
G1 X118.625 Y81.214 E2.7551
G1 X121.152 Y81.21 E2.8433
G92 E0
G1 E-1 F1800
G0 Z0.48 F1000
G0 X118.685 Y81.613 F7800
G0 Z0.08 F1000
G1 E0 F1800
G92 E0
G1 X115.966 Y81.731 E0.095 F1400
G1 X113.301 Y81.967 E0.1885
G1 X110.574 Y82.329 E0.2845
G1 X110.111 Y82.441 E0.3012
G1 X109.645 Y82.64 E0.3189
G1 X109.217 Y82.915 E0.3366
G1 X108.843 Y83.256 E0.3543
G1 X108.529 Y83.653 E0.372
G1 X108.285 Y84.098 E0.3897
G1 X108.128 Y84.546 E0.4063
G1 X107.722 Y86.395 E0.4724
G1 X107.449 Y88.266 E0.5384
G1 X107.315 Y90.129 E0.6037
G1 X107.315 Y92.01 E0.6694
G1 X107.448 Y93.878 E0.7348
G1 X107.716 Y95.719 E0.7997
G1 X108.125 Y97.594 E0.8667
G1 X108.285 Y98.05 E0.8836
G1 X108.529 Y98.496 E0.9014
G1 X108.843 Y98.892 E0.919
G1 X109.217 Y99.233 E0.9367
G1 X109.645 Y99.508 E0.9545
G1 X110.111 Y99.707 E0.9722
G1 X110.566 Y99.817 E0.9885
G1 X113.256 Y100.177 E1.0833
G1 X115.959 Y100.417 E1.1781
G1 X118.639 Y100.535 E1.2717
G1 X121.346 Y100.535 E1.3663
G1 X124.032 Y100.417 E1.4602
G1 X126.697 Y100.182 E1.5536
G1 X129.426 Y99.819 E1.6498
G1 X129.886 Y99.707 E1.6663
G1 X130.354 Y99.509 E1.684
G1 X130.783 Y99.233 E1.7018
G1 X131.157 Y98.892 E1.7195
G1 X131.473 Y98.493 E1.7373
G1 X131.714 Y98.047 E1.755
G1 X131.87 Y97.602 E1.7715
G1 X132.278 Y95.751 E1.8377
G1 X132.549 Y93.883 E1.9036
G1 X132.685 Y92.02 E1.9688
G1 X132.685 Y90.159 E2.0338
G1 X132.55 Y88.271 E2.0999
G1 X132.284 Y86.427 E2.165
G1 X131.873 Y84.554 E2.2319
G1 X131.714 Y84.101 E2.2487
G1 X131.473 Y83.655 E2.2664
G1 X131.157 Y83.256 E2.2842
G1 X130.783 Y82.915 E2.3019
G1 X130.354 Y82.64 E2.3197
G1 X129.886 Y82.441 E2.3374
G1 X129.435 Y82.332 E2.3536
G1 X126.742 Y81.972 E2.4485
G1 X124.032 Y81.731 E2.5435
G1 X121.359 Y81.613 E2.637
G1 X118.685 Y81.613 E2.7304
G92 E0
G1 E-1 F1800
G0 Z0.48 F1000
G0 X121.159 Y80.789 F7800
G0 Z0.08 F1000
G1 E0 F1800
G92 E0
G1 X123.495 Y80.876 E0.0816 F1225
G1 X125.585 Y81.022 E0.1548
G1 X126.002 Y80.86 E0.1704
G1 X126.136 Y80.704 E0.1776
G1 X126.29 Y80.905 E0.1864
G1 X126.558 Y81.09 E0.1978
G1 X126.794 Y81.152 E0.2063
G1 X127.468 Y81.229 E0.23
G1 X127.743 Y81.202 E0.2397
G1 X128.019 Y81.065 E0.2504
G1 X128.16 Y80.943 E0.2569
G1 X128.214 Y81.037 E0.2607
G1 X128.4 Y81.236 E0.2702
G1 X128.68 Y81.385 E0.2813
G1 X129.494 Y81.512 E0.3101
G1 X130.137 Y81.667 E0.3332
G1 X130.735 Y81.922 E0.3559
G1 X131.273 Y82.266 E0.3782
G1 X131.753 Y82.701 E0.4008
G1 X132.149 Y83.202 E0.4231
G1 X132.456 Y83.76 E0.4454
G1 X132.676 Y84.391 E0.4687
G1 X133.039 Y86.011 E0.5267
G1 X133.308 Y87.697 E0.5863
G1 X133.468 Y89.378 E0.6453
G1 X133.52 Y91.053 E0.7038
G1 X133.468 Y92.766 E0.7636
G1 X133.309 Y94.442 E0.8224
G1 X133.046 Y96.098 E0.881
G1 X132.676 Y97.758 E0.9404
G1 X132.462 Y98.374 E0.9632
G1 X132.149 Y98.944 E0.9859
G1 X131.756 Y99.444 E1.0081
G1 X131.276 Y99.879 E1.0307
G1 X130.737 Y100.225 E1.0531
G1 X130.152 Y100.476 E1.0753
G1 X129.495 Y100.636 E1.0989
G1 X128.735 Y100.751 E1.1258
G1 X128.408 Y100.9 E1.1383
G1 X128.153 Y101.183 E1.1516
G1 X128.149 Y101.195 E1.1521
G1 X127.898 Y101.007 E1.163
G1 X127.649 Y100.93 E1.1722
G1 X127.429 Y100.924 E1.1799
G1 X126.673 Y101.014 E1.2064
G1 X126.342 Y101.191 E1.2195
G1 X126.135 Y101.443 E1.2309
G1 X125.974 Y101.266 E1.2393
G1 X125.563 Y101.126 E1.2545
G1 X123.499 Y101.27 E1.3267
G1 X121.384 Y101.355 E1.4007
G1 X118.843 Y101.359 E1.4894
G1 X116.532 Y101.271 E1.5702
G1 X114.413 Y101.127 E1.6443
G1 X113.991 Y101.29 E1.6601
G1 X113.863 Y101.444 E1.6671
G1 X113.719 Y101.253 E1.6755
G1 X113.453 Y101.062 E1.6869
G1 X113.211 Y100.998 E1.6957
G1 X112.551 Y100.92 E1.7189
G1 X112.295 Y100.939 E1.7278
G1 X112.058 Y101.032 E1.7367
G1 X111.843 Y101.201 E1.7463
G1 X111.824 Y101.148 E1.7482
G1 X111.618 Y100.935 E1.7586
G1 X111.443 Y100.816 E1.7659
G1 X111.212 Y100.743 E1.7744
G1 X110.504 Y100.636 E1.7994
G1 X109.861 Y100.481 E1.8225
G1 X109.265 Y100.226 E1.8451
G1 X108.727 Y99.882 E1.8675
G1 X108.247 Y99.447 E1.8901
G1 X107.849 Y98.946 E1.9124
G1 X107.545 Y98.389 E1.9346
G1 X107.324 Y97.757 E1.958
G1 X106.959 Y96.137 E2.016
G1 X106.691 Y94.452 E2.0755
G1 X106.532 Y92.771 E2.1345
G1 X106.48 Y91.093 E2.1931
G1 X106.532 Y89.382 E2.2529
G1 X106.689 Y87.706 E2.3117
G1 X106.952 Y86.05 E2.3703
G1 X107.324 Y84.39 E2.4297
G1 X107.538 Y83.774 E2.4525
G1 X107.849 Y83.204 E2.4751
G1 X108.244 Y82.704 E2.4974
G1 X108.724 Y82.269 E2.52
G1 X109.263 Y81.923 E2.5424
G1 X109.846 Y81.672 E2.5645
G1 X110.505 Y81.512 E2.5882
G1 X111.267 Y81.397 E2.6151
G1 X111.614 Y81.236 E2.6285
G1 X111.845 Y80.938 E2.6417
G1 X111.993 Y81.085 E2.6489
G1 X112.331 Y81.22 E2.6617
G1 X112.582 Y81.224 E2.6704
G1 X113.317 Y81.13 E2.6963
G1 X113.518 Y81.048 E2.7039
G1 X113.742 Y80.866 E2.714
G1 X113.864 Y80.703 E2.7211
G1 X114.012 Y80.875 E2.729
G1 X114.44 Y81.023 E2.7448
G1 X116.499 Y80.877 E2.8169
G1 X118.616 Y80.794 E2.8909
G1 X121.159 Y80.789 E2.9797
G92 E0
G1 E-1 F1800
G0 Z0.48 F1000
G0 X118.694 Y82.033 F7800
G0 Z0.08 F1000
G1 E0 F1800
G92 E0
G1 X115.994 Y82.15 E0.0944 F1225
G1 X113.347 Y82.384 E0.1872
G1 X110.651 Y82.743 E0.2821
G1 X110.244 Y82.841 E0.2968
G1 X109.843 Y83.013 E0.312
G1 X109.474 Y83.25 E0.3273
G1 X109.151 Y83.544 E0.3426
G1 X108.88 Y83.886 E0.3578
G1 X108.67 Y84.27 E0.3731
G1 X108.533 Y84.661 E0.3876
G1 X108.135 Y86.471 E0.4523
G1 X107.866 Y88.311 E0.5172
G1 X107.735 Y90.144 E0.5814
G1 X107.735 Y91.995 E0.6461
G1 X107.866 Y93.833 E0.7104
G1 X108.13 Y95.644 E0.7743
G1 X108.53 Y97.479 E0.8399
G1 X108.67 Y97.878 E0.8547
G1 X108.88 Y98.263 E0.87
G1 X109.151 Y98.604 E0.8852
G1 X109.474 Y98.898 E0.9005
G1 X109.843 Y99.136 E0.9158
G1 X110.244 Y99.307 E0.931
G1 X110.643 Y99.403 E0.9454
G1 X113.302 Y99.759 E1.0391
G1 X115.987 Y99.998 E1.1332
G1 X118.648 Y100.115 E1.2262
G1 X121.337 Y100.115 E1.3201
G1 X124.004 Y99.998 E1.4134
G1 X126.651 Y99.764 E1.5061
G1 X129.349 Y99.405 E1.6012
G1 X129.754 Y99.307 E1.6158
G1 X130.157 Y99.136 E1.631
G1 X130.526 Y98.898 E1.6464
G1 X130.849 Y98.604 E1.6616
G1 X131.121 Y98.261 E1.6769
G1 X131.329 Y97.877 E1.6922
G1 X131.465 Y97.487 E1.7066
G1 X131.865 Y95.675 E1.7714
G1 X132.132 Y93.837 E1.8363
G1 X132.265 Y92.004 E1.9004
G1 X132.265 Y90.174 E1.9644
G1 X132.132 Y88.316 E2.0294
G1 X131.87 Y86.502 E2.0934
G1 X131.468 Y84.669 E2.159
G1 X131.329 Y84.271 E2.1737
G1 X131.121 Y83.887 E2.1889
G1 X130.849 Y83.544 E2.2042
G1 X130.526 Y83.25 E2.2195
G1 X130.157 Y83.012 E2.2348
G1 X129.754 Y82.841 E2.2501
G1 X129.357 Y82.745 E2.2644
G1 X126.696 Y82.389 E2.3581
G1 X124.004 Y82.15 E2.4525
G1 X121.35 Y82.033 E2.5453
G1 X118.694 Y82.033 E2.638
G92 E0
G1 E-1 F1800
G0 Z0.48 F1000
G0 X121.167 Y80.369 F7800
G0 Z0.08 F1000
G1 E0 F1800
G92 E0
G1 X123.518 Y80.457 E0.0822 F1050
G1 X125.521 Y80.596 E0.1523
G1 X125.752 Y80.506 E0.161
G1 X125.913 Y80.319 E0.1696
G1 X125.961 Y80.15 E0.1757
G1 X125.966 Y79.866 E0.1856
G1 X126 Y79.658 E0.193
G1 X126.072 Y79.451 E0.2006
G1 X126.176 Y79.262 E0.2082
G1 X126.311 Y79.091 E0.2158
G1 X126.471 Y78.946 E0.2233
G1 X126.654 Y78.83 E0.2309
G1 X126.854 Y78.747 E0.2385
G1 X127.066 Y78.7 E0.246
G1 X127.283 Y78.687 E0.2536
G1 X127.499 Y78.709 E0.2612
G1 X127.713 Y78.773 E0.269
G1 X127.909 Y78.867 E0.2766
G1 X128.084 Y78.992 E0.2841
G1 X128.237 Y79.147 E0.2917
G1 X128.362 Y79.324 E0.2993
G1 X128.455 Y79.52 E0.3069
G1 X128.515 Y79.729 E0.3145
G1 X128.537 Y79.943 E0.322
G1 X128.523 Y80.163 E0.3297
G1 X128.463 Y80.452 E0.34
G1 X128.475 Y80.613 E0.3456
G1 X128.512 Y80.712 E0.3493
G1 X128.554 Y80.786 E0.3523
G1 X128.659 Y80.898 E0.3576
G1 X128.815 Y80.981 E0.3638
G1 X129.576 Y81.099 E0.3907
G1 X130.27 Y81.267 E0.4156
G1 X130.932 Y81.549 E0.4408
G1 X131.529 Y81.932 E0.4655
G1 X132.061 Y82.413 E0.4906
G1 X132.5 Y82.97 E0.5154
G1 X132.84 Y83.588 E0.54
G1 X133.081 Y84.275 E0.5654
G1 X133.452 Y85.932 E0.6247
G1 X133.724 Y87.644 E0.6853
G1 X133.887 Y89.351 E0.7452
G1 X133.941 Y91.053 E0.8046
G1 X133.887 Y92.792 E0.8654
G1 X133.726 Y94.495 E0.9251
G1 X133.459 Y96.177 E0.9846
G1 X133.081 Y97.874 E1.0453
G1 X132.847 Y98.545 E1.0701
G1 X132.501 Y99.177 E1.0953
G1 X132.064 Y99.732 E1.12
G1 X131.533 Y100.214 E1.145
G1 X130.934 Y100.598 E1.1698
G1 X130.285 Y100.876 E1.1945
G1 X129.576 Y101.049 E1.22
G1 X128.856 Y101.158 E1.2454
G1 X128.662 Y101.246 E1.2529
G1 X128.528 Y101.395 E1.2599
G1 X128.456 Y101.629 E1.2684
G1 X128.523 Y101.984 E1.281
G1 X128.538 Y102.199 E1.2885
G1 X128.516 Y102.413 E1.2961
G1 X128.457 Y102.623 E1.3037
G1 X128.365 Y102.819 E1.3112
G1 X128.241 Y102.996 E1.3188
G1 X128.088 Y103.152 E1.3264
G1 X127.914 Y103.278 E1.3339
G1 X127.718 Y103.374 E1.3415
G1 X127.511 Y103.436 E1.3491
G1 X127.296 Y103.461 E1.3567
G1 X127.071 Y103.449 E1.3645
G1 X126.86 Y103.403 E1.3721
G1 X126.66 Y103.321 E1.3796
G1 X126.476 Y103.206 E1.3872
G1 X126.315 Y103.062 E1.3948
G1 X126.179 Y102.891 E1.4024
G1 X126.074 Y102.702 E1.4099
G1 X126.002 Y102.496 E1.4175
G1 X125.966 Y102.282 E1.4251
G1 X125.961 Y101.997 E1.4351
G1 X125.908 Y101.818 E1.4416
G1 X125.736 Y101.629 E1.4505
G1 X125.507 Y101.551 E1.459
G1 X123.522 Y101.689 E1.5285
G1 X121.392 Y101.775 E1.6029
G1 X118.835 Y101.779 E1.6922
G1 X116.51 Y101.691 E1.7735
G1 X114.477 Y101.552 E1.8446
G1 X114.244 Y101.642 E1.8533
G1 X114.082 Y101.837 E1.8622
G1 X114.037 Y102.003 E1.8682
G1 X114.034 Y102.282 E1.8779
G1 X113.998 Y102.49 E1.8853
G1 X113.928 Y102.697 E1.8929
G1 X113.823 Y102.886 E1.9005
G1 X113.687 Y103.057 E1.9081
G1 X113.527 Y103.202 E1.9157
G1 X113.344 Y103.318 E1.9232
G1 X113.144 Y103.401 E1.9308
G1 X112.932 Y103.449 E1.9384
G1 X112.715 Y103.462 E1.946
G1 X112.501 Y103.439 E1.9535
G1 X112.285 Y103.376 E1.9613
G1 X112.091 Y103.281 E1.9689
G1 X111.914 Y103.156 E1.9765
G1 X111.762 Y103.001 E1.984
G1 X111.638 Y102.824 E1.9916
G1 X111.543 Y102.628 E1.9992
G1 X111.485 Y102.419 E2.0068
G1 X111.461 Y102.204 E2.0143
G1 X111.475 Y101.983 E2.0221
G1 X111.542 Y101.609 E2.0353
G1 X111.459 Y101.375 E2.044
G1 X111.346 Y101.258 E2.0497
G1 X111.258 Y101.198 E2.0534
G1 X111.117 Y101.154 E2.0586
G1 X110.423 Y101.049 E2.0831
G1 X109.728 Y100.881 E2.108
G1 X109.068 Y100.599 E2.1331
G1 X108.471 Y100.217 E2.1579
G1 X107.939 Y99.735 E2.1829
G1 X107.498 Y99.179 E2.2077
G1 X107.16 Y98.56 E2.2323
G1 X106.919 Y97.873 E2.2578
G1 X106.546 Y96.216 E2.3171
G1 X106.274 Y94.505 E2.3776
G1 X106.113 Y92.797 E2.4375
G1 X106.059 Y91.093 E2.497
G1 X106.113 Y89.356 E2.5577
G1 X106.272 Y87.653 E2.6174
G1 X106.539 Y85.971 E2.6769
G1 X106.919 Y84.275 E2.7377
G1 X107.153 Y83.603 E2.7625
G1 X107.497 Y82.971 E2.7876
G1 X107.936 Y82.416 E2.8123
G1 X108.467 Y81.935 E2.8374
G1 X109.066 Y81.55 E2.8622
G1 X109.713 Y81.272 E2.8868
G1 X110.424 Y81.099 E2.9123
G1 X111.145 Y80.99 E2.9378
G1 X111.344 Y80.898 E2.9455
G1 X111.501 Y80.695 E2.9545
G1 X111.54 Y80.509 E2.9611
G1 X111.475 Y80.165 E2.9733
G1 X111.461 Y79.95 E2.9808
G1 X111.484 Y79.735 E2.9884
G1 X111.541 Y79.525 E2.996
G1 X111.635 Y79.329 E3.0036
G1 X111.758 Y79.151 E3.0111
G1 X111.91 Y78.996 E3.0187
G1 X112.086 Y78.87 E3.0263
G1 X112.28 Y78.775 E3.0338
G1 X112.489 Y78.712 E3.0415
G1 X112.703 Y78.687 E3.049
G1 X112.927 Y78.699 E3.0568
G1 X113.138 Y78.745 E3.0644
G1 X113.338 Y78.828 E3.0719
G1 X113.522 Y78.942 E3.0795
G1 X113.683 Y79.087 E3.087
G1 X113.82 Y79.257 E3.0947
G1 X113.926 Y79.446 E3.1022
G1 X113.996 Y79.652 E3.1098
G1 X114.034 Y79.867 E3.1175
G1 X114.039 Y80.162 E3.1278
G1 X114.089 Y80.322 E3.1336
G1 X114.256 Y80.515 E3.1425
G1 X114.496 Y80.598 E3.1514
G1 X116.476 Y80.457 E3.2207
G1 X118.608 Y80.374 E3.2952
G1 X121.167 Y80.369 E3.3846
G92 E0
G1 E-1 F1800
G0 Z0.48 F1000
G0 X118.703 Y82.453 F7800
G0 Z0.08 F1000
G1 E0 F1800
G92 E0
G1 X116.022 Y82.569 E0.0937 F1050
G1 X113.394 Y82.802 E0.1859
G1 X110.728 Y83.156 E0.2798
G1 X110.377 Y83.241 E0.2924
G1 X110.04 Y83.385 E0.3052
G1 X109.731 Y83.584 E0.318
G1 X109.459 Y83.831 E0.3309
G1 X109.231 Y84.119 E0.3437
G1 X109.055 Y84.441 E0.3565
G1 X108.937 Y84.776 E0.3689
G1 X108.549 Y86.546 E0.4322
G1 X108.284 Y88.356 E0.4961
G1 X108.155 Y90.159 E0.5592
G1 X108.155 Y91.981 E0.6228
G1 X108.284 Y93.787 E0.6861
G1 X108.543 Y95.569 E0.7489
G1 X108.935 Y97.364 E0.8131
G1 X109.055 Y97.707 E0.8258
G1 X109.231 Y98.03 E0.8386
G1 X109.459 Y98.317 E0.8514
G1 X109.731 Y98.564 E0.8643
G1 X110.04 Y98.763 E0.8771
G1 X110.377 Y98.907 E0.8899
G1 X110.72 Y98.99 E0.9022
G1 X113.349 Y99.342 E0.9948
G1 X116.015 Y99.579 E1.0883
G1 X118.657 Y99.695 E1.1807
G1 X121.328 Y99.695 E1.274
G1 X123.976 Y99.579 E1.3666
G1 X126.604 Y99.347 E1.4587
G1 X129.272 Y98.992 E1.5527
G1 X129.621 Y98.907 E1.5652
G1 X129.96 Y98.763 E1.5781
G1 X130.269 Y98.564 E1.5909
G1 X130.541 Y98.317 E1.6037
G1 X130.769 Y98.029 E1.6166
G1 X130.944 Y97.706 E1.6294
G1 X131.061 Y97.372 E1.6417
G1 X131.451 Y95.6 E1.7051
G1 X131.714 Y93.792 E1.7689
G1 X131.845 Y91.989 E1.8321
G1 X131.845 Y90.189 E1.8949
G1 X131.714 Y88.361 E1.9589
G1 X131.457 Y86.577 E2.0219
G1 X131.063 Y84.784 E2.086
G1 X130.944 Y84.442 E2.0986
G1 X130.769 Y84.119 E2.1115
G1 X130.541 Y83.831 E2.1243
G1 X130.269 Y83.584 E2.1371
G1 X129.96 Y83.385 E2.15
G1 X129.621 Y83.241 E2.1628
G1 X129.28 Y83.158 E2.1751
G1 X126.65 Y82.807 E2.2678
G1 X123.976 Y82.569 E2.3615
G1 X121.341 Y82.453 E2.4536
G1 X118.703 Y82.453 E2.5457
G92 E0
G1 E-1 F1800
G0 Z0.48 F1000
G0 X113.66 Y80.011 F7800
G0 Z0.08 F1000
G1 E0 F1800
G92 E0
G1 X113.652 Y79.854 E0.0055 F1050
G1 X113.619 Y79.701 E0.011
G1 X113.559 Y79.556 E0.0164
G1 X113.476 Y79.424 E0.0219
G1 X113.371 Y79.306 E0.0274
G1 X113.245 Y79.209 E0.0329
G1 X113.107 Y79.136 E0.0384
G1 X112.957 Y79.087 E0.0439
G1 X112.801 Y79.064 E0.0494
G1 X112.644 Y79.069 E0.0549
G1 X112.49 Y79.1 E0.0604
G1 X112.337 Y79.162 E0.0661
G1 X112.204 Y79.246 E0.0716
G1 X112.092 Y79.343 E0.0768
G1 X111.99 Y79.471 E0.0825
G1 X111.909 Y79.618 E0.0884
G1 X111.838 Y79.916 E0.0991
G1 X111.871 Y80.219 E0.1097
G1 X111.93 Y80.373 E0.1155
G1 X112.016 Y80.516 E0.1213
G1 X112.228 Y80.726 E0.1318
G1 X112.415 Y80.801 E0.1388
G1 X112.559 Y80.804 E0.1438
G1 X113.209 Y80.721 E0.1667
G1 X113.302 Y80.683 E0.1702
G1 X113.437 Y80.573 E0.1763
G1 X113.529 Y80.45 E0.1817
G1 X113.639 Y80.176 E0.192
G1 X113.66 Y80.011 E0.1978
G92 E0
G1 E-1 F1800
G0 Z0.48 F1000
G0 X126.341 Y80.02 F7800
G0 Z0.08 F1000
G1 E0 F1800
G92 E0
G1 X126.36 Y80.174 E0.0054 F1050
G1 X126.408 Y80.325 E0.011
G1 X126.479 Y80.461 E0.0163
G1 X126.583 Y80.597 E0.0223
G1 X126.736 Y80.703 E0.0288
G1 X126.871 Y80.738 E0.0337
G1 X127.472 Y80.806 E0.0548
G1 X127.626 Y80.791 E0.0602
G1 X127.784 Y80.713 E0.0664
G1 X127.892 Y80.619 E0.0713
G1 X127.992 Y80.503 E0.0767
G1 X128.072 Y80.365 E0.0823
G1 X128.127 Y80.218 E0.0877
G1 X128.155 Y80.063 E0.0933
G1 X128.158 Y79.908 E0.0987
G1 X128.133 Y79.743 E0.1045
G1 X128.012 Y79.472 E0.1149
G1 X127.901 Y79.335 E0.121
G1 X127.663 Y79.161 E0.1313
G1 X127.509 Y79.1 E0.1371
G1 X127.353 Y79.069 E0.1426
G1 X127.197 Y79.064 E0.1481
G1 X127.031 Y79.089 E0.154
G1 X126.761 Y79.204 E0.1642
G1 X126.624 Y79.311 E0.1703
G1 X126.518 Y79.43 E0.1759
G1 X126.436 Y79.563 E0.1813
G1 X126.379 Y79.702 E0.1866
G1 X126.345 Y79.864 E0.1924
G1 X126.341 Y80.02 E0.1978
G92 E0
G1 E-1 F1800
G0 Z0.48 F1000
G0 X126.802 Y101.422 F7800
G0 Z0.08 F1000
G1 E0 F1800
G92 E0
G1 X126.614 Y101.522 E0.0075 F1050
G1 X126.479 Y101.686 E0.0148
G1 X126.408 Y101.823 E0.0202
G1 X126.358 Y101.982 E0.0261
G1 X126.343 Y102.276 E0.0363
G1 X126.377 Y102.439 E0.0422
G1 X126.436 Y102.584 E0.0476
G1 X126.518 Y102.718 E0.0531
G1 X126.629 Y102.842 E0.0589
G1 X126.754 Y102.939 E0.0645
G1 X126.885 Y103.008 E0.0696
G1 X127.039 Y103.061 E0.0753
G1 X127.206 Y103.086 E0.0812
G1 X127.501 Y103.051 E0.0916
G1 X127.663 Y102.987 E0.0977
G1 X127.901 Y102.813 E0.108
G1 X128.006 Y102.683 E0.1138
G1 X128.082 Y102.546 E0.1193
G1 X128.134 Y102.397 E0.1248
G1 X128.159 Y102.231 E0.1306
G1 X128.13 Y101.938 E0.1409
G1 X128.072 Y101.783 E0.1467
G1 X127.992 Y101.647 E0.1522
G1 X127.887 Y101.524 E0.1579
G1 X127.704 Y101.386 E0.1659
G1 X127.58 Y101.348 E0.1704
G1 X127.448 Y101.344 E0.175
G1 X126.802 Y101.421 E0.1978
G92 E0
G1 E-1 F1800
G0 Z0.48 F1000
G0 X113.271 Y101.448 F7800
G0 Z0.08 F1000
G1 E0 F1800
G92 E0
G1 X113.132 Y101.411 E0.005 F1050
G1 X112.542 Y101.342 E0.0258
G1 X112.389 Y101.354 E0.0311
G1 X112.268 Y101.401 E0.0357
G1 X112.104 Y101.53 E0.043
G1 X111.933 Y101.767 E0.0532
G1 X111.874 Y101.921 E0.0589
G1 X111.844 Y102.076 E0.0644
G1 X111.84 Y102.233 E0.0699
G1 X111.864 Y102.388 E0.0754
G1 X111.913 Y102.537 E0.0809
G1 X111.99 Y102.677 E0.0864
G1 X112.097 Y102.812 E0.0925
G1 X112.33 Y102.983 E0.1026
G1 X112.49 Y103.048 E0.1086
G1 X112.644 Y103.079 E0.1141
G1 X112.801 Y103.084 E0.1196
G1 X112.957 Y103.061 E0.1251
G1 X113.107 Y103.012 E0.1306
G1 X113.245 Y102.939 E0.136
G1 X113.378 Y102.837 E0.1419
G1 X113.555 Y102.601 E0.1522
G1 X113.619 Y102.447 E0.158
G1 X113.652 Y102.294 E0.1635
G1 X113.66 Y102.137 E0.169
G1 X113.638 Y101.973 E0.1747
G1 X113.594 Y101.831 E0.1799
G1 X113.523 Y101.691 E0.1854
G1 X113.422 Y101.557 E0.1913
G1 X113.271 Y101.448 E0.1978
G92 E0
G1 E-1 F1800
G0 Z0.68 F1000
; layer 2, Z = 0.08
T1
; tool H0.2 W0.42
G0 X101.753 Y78.385 F7800
G0 Z0.08 F1000
G1 E0 F540
G92 E0
G1 X102.622 Y77.349 E0.0472 F2100
G1 X103.606 Y76.42 E0.0945
G1 X104.694 Y75.609 E0.1419
G1 X105.953 Y74.882 E0.1926
G1 X107.453 Y74.27 E0.2492
G1 X108.819 Y73.918 E0.2985
G1 X111.051 Y73.596 E0.3772
G1 X112.836 Y73.388 E0.44
G1 X114.641 Y73.224 E0.5033
G1 X116.429 Y73.109 E0.5659
G1 X118.198 Y73.04 E0.6277
G1 X120.009 Y73.016 E0.6909
G1 X121.808 Y73.039 E0.7538
G1 X123.598 Y73.108 E0.8163
G1 X125.386 Y73.223 E0.8789
G1 X127.169 Y73.384 E0.9414
G1 X128.948 Y73.59 E1.004
G1 X131.001 Y73.883 E1.0764
G1 X132.34 Y74.19 E1.1244
G1 X133.698 Y74.705 E1.1751
G1 X134.909 Y75.333 E1.2227
G1 X136.115 Y76.151 E1.2736
G1 X137.324 Y77.239 E1.3304
G1 X138.266 Y78.353 E1.3814
G1 X139.126 Y79.653 E1.4358
G1 X139.975 Y81.516 E1.5073
G1 X140.51 Y83.693 E1.5856
G1 X140.773 Y85.032 E1.6333
G1 X140.984 Y86.371 E1.6806
G1 X141.139 Y87.694 E1.7271
G1 X141.245 Y89.042 E1.7743
G1 X141.298 Y90.385 E1.8213
G1 X141.298 Y91.726 E1.8681
G1 X141.247 Y93.068 E1.915
G1 X141.144 Y94.407 E1.9619
G1 X140.988 Y95.741 E2.0088
G1 X140.782 Y97.067 E2.0557
G1 X140.524 Y98.385 E2.1026
G1 X140.176 Y99.858 E2.1554
G1 X139.82 Y100.981 E2.1966
G1 X139.253 Y102.23 E2.2445
G1 X138.552 Y103.392 E2.2919
G1 X137.723 Y104.463 E2.3392
G1 X136.777 Y105.429 E2.3864
G1 X135.721 Y106.281 E2.4338
G1 X134.57 Y107.006 E2.4813
G1 X133.347 Y107.591 E2.5286
G1 X132.064 Y108.029 E2.576
G1 X130.954 Y108.269 E2.6156
G1 X128.984 Y108.55 E2.6851
G1 X127.204 Y108.758 E2.7477
G1 X125.359 Y108.924 E2.8124
G1 X123.613 Y109.037 E2.8735
G1 X121.845 Y109.105 E2.9353
G1 X120.034 Y109.129 E2.9985
G1 X118.234 Y109.106 E3.0614
G1 X116.444 Y109.037 E3.124
G1 X114.657 Y108.922 E3.1865
G1 X112.873 Y108.761 E3.2491
G1 X111.075 Y108.552 E3.3123
G1 X108.498 Y108.175 E3.4032
G1 X106.755 Y107.629 E3.467
G1 X105.126 Y106.823 E3.5305
G1 X103.642 Y105.773 E3.594
G1 X102.405 Y104.569 E3.6543
G1 X101.51 Y103.421 E3.7051
G1 X100.703 Y102.092 E3.7594
G1 X99.989 Y100.349 E3.8252
G1 X99.529 Y98.431 E3.8941
G1 X99.267 Y97.102 E3.9414
G1 X99.057 Y95.761 E3.9888
G1 X98.901 Y94.426 E4.0357
G1 X98.798 Y93.102 E4.0821
G1 X98.745 Y91.763 E4.1289
G1 X98.744 Y90.419 E4.1758
G1 X98.796 Y89.079 E4.2227
G1 X98.899 Y87.741 E4.2695
G1 X99.055 Y86.396 E4.3168
G1 X99.263 Y85.065 E4.3639
G1 X99.521 Y83.748 E4.4107
G1 X99.887 Y82.202 E4.4662
G1 X100.35 Y80.829 E4.5168
G1 X101.01 Y79.515 E4.5682
G1 X101.753 Y78.385 E4.6154
G0 X102.091 Y78.636 F7800
G92 E0
G1 X102.928 Y77.637 E0.0455 F2100
G1 X103.876 Y76.742 E0.0911
G1 X104.925 Y75.96 E0.1367
G1 X106.138 Y75.26 E0.1856
G1 X107.585 Y74.669 E0.2402
G1 X108.901 Y74.331 E0.2877
G1 X111.105 Y74.013 E0.3655
G1 X112.879 Y73.806 E0.4278
G1 X114.673 Y73.643 E0.4908
G1 X116.451 Y73.528 E0.553
G1 X118.209 Y73.46 E0.6144
G1 X120.009 Y73.436 E0.6773
G1 X121.798 Y73.459 E0.7397
G1 X123.577 Y73.527 E0.8019
G1 X125.353 Y73.642 E0.8641
G1 X127.126 Y73.802 E0.9263
G1 X128.894 Y74.007 E0.9884
G1 X130.924 Y74.296 E1.06
G1 X132.218 Y74.593 E1.1064
G1 X133.527 Y75.089 E1.1553
G1 X134.693 Y75.694 E1.2012
G1 X135.855 Y76.482 E1.2502
G1 X137.022 Y77.532 E1.305
G1 X137.93 Y78.606 E1.3541
G1 X138.757 Y79.857 E1.4065
G1 X139.577 Y81.654 E1.4755
G1 X140.1 Y83.784 E1.5521
G1 X140.36 Y85.106 E1.5991
G1 X140.568 Y86.428 E1.6458
G1 X140.721 Y87.735 E1.6918
G1 X140.826 Y89.067 E1.7385
G1 X140.878 Y90.393 E1.7848
G1 X140.878 Y91.718 E1.8311
G1 X140.828 Y93.044 E1.8774
G1 X140.725 Y94.367 E1.9238
G1 X140.572 Y95.685 E1.9701
G1 X140.368 Y96.995 E2.0164
G1 X140.113 Y98.296 E2.0627
G1 X139.77 Y99.746 E2.1147
G1 X139.427 Y100.83 E2.1545
G1 X138.881 Y102.034 E2.2006
G1 X138.205 Y103.155 E2.2463
G1 X137.406 Y104.186 E2.2919
G1 X136.494 Y105.117 E2.3374
G1 X135.476 Y105.939 E2.3831
G1 X134.367 Y106.638 E2.4289
G1 X133.188 Y107.201 E2.4745
G1 X131.952 Y107.623 E2.5201
G1 X130.88 Y107.855 E2.5584
G1 X128.93 Y108.133 E2.6272
G1 X127.161 Y108.34 E2.6894
G1 X125.327 Y108.505 E2.7537
G1 X123.591 Y108.617 E2.8145
G1 X121.834 Y108.685 E2.8759
G1 X120.034 Y108.709 E2.9388
G1 X118.245 Y108.686 E3.0012
G1 X116.466 Y108.618 E3.0634
G1 X114.689 Y108.503 E3.1256
G1 X112.916 Y108.344 E3.1877
G1 X111.129 Y108.136 E3.2506
G1 X108.592 Y107.764 E3.3401
G1 X106.912 Y107.238 E3.4016
G1 X105.342 Y106.461 E3.4628
G1 X103.911 Y105.449 E3.524
G1 X102.718 Y104.288 E3.5821
G1 X101.856 Y103.182 E3.6311
G1 X101.08 Y101.903 E3.6834
G1 X100.39 Y100.22 E3.7469
G1 X99.939 Y98.342 E3.8143
G1 X99.681 Y97.029 E3.8611
G1 X99.473 Y95.704 E3.9079
G1 X99.319 Y94.386 E3.9542
G1 X99.217 Y93.078 E4.0001
G1 X99.165 Y91.754 E4.0463
G1 X99.164 Y90.427 E4.0927
G1 X99.215 Y89.103 E4.1389
G1 X99.317 Y87.781 E4.1852
G1 X99.471 Y86.452 E4.232
G1 X99.677 Y85.138 E4.2784
G1 X99.932 Y83.837 E4.3247
G1 X100.292 Y82.318 E4.3792
G1 X100.738 Y80.992 E4.4281
G1 X101.374 Y79.725 E4.4776
G1 X102.091 Y78.636 E4.5231
G92 E0
G1 E-1 F1800
G0 Z0.48 F1000
G0 X120.012 Y84.957 F7800
G0 Z0.08 F1000
G1 E0 F1800
G92 E0
G1 X121.502 Y84.976 E0.052 F1925
G1 X122.985 Y85.033 E0.1039
G1 X124.466 Y85.128 E0.1557
G1 X125.943 Y85.262 E0.2075
G1 X127.417 Y85.433 E0.2593
G1 X128.687 Y85.614 E0.3041
G1 X128.848 Y86.271 E0.3277
G1 X129.014 Y87.113 E0.3577
G1 X129.152 Y87.994 E0.3888
G1 X129.254 Y88.857 E0.4192
G1 X129.323 Y89.744 E0.4503
G1 X129.358 Y90.622 E0.4809
G1 X129.358 Y91.501 E0.5116
G1 X129.325 Y92.38 E0.5424
G1 X129.257 Y93.257 E0.5731
G1 X129.155 Y94.131 E0.6038
G1 X129.02 Y95 E0.6345
G1 X128.851 Y95.863 E0.6652
G1 X128.693 Y96.53 E0.6892
G1 X127.448 Y96.708 E0.7331
G1 X125.975 Y96.88 E0.7849
G1 X124.439 Y97.018 E0.8388
G1 X122.997 Y97.111 E0.8892
G1 X121.534 Y97.168 E0.9404
G1 X120.031 Y97.188 E0.9929
G1 X118.54 Y97.169 E1.0449
G1 X117.058 Y97.112 E1.0967
G1 X115.577 Y97.017 E1.1486
G1 X114.099 Y96.883 E1.2004
G1 X112.63 Y96.713 E1.252
G1 X111.35 Y96.525 E1.2972
G1 X111.196 Y95.883 E1.3203
G1 X111.027 Y95.023 E1.3509
G1 X110.889 Y94.142 E1.382
G1 X110.787 Y93.269 E1.4127
G1 X110.719 Y92.404 E1.443
G1 X110.685 Y91.525 E1.4737
G1 X110.684 Y90.644 E1.5045
G1 X110.718 Y89.767 E1.5351
G1 X110.786 Y88.89 E1.5659
G1 X110.888 Y88.007 E1.5969
G1 X111.024 Y87.136 E1.6277
G1 X111.194 Y86.273 E1.6584
G1 X111.349 Y85.617 E1.682
G1 X112.595 Y85.437 E1.7259
G1 X114.068 Y85.265 E1.7777
G1 X115.565 Y85.129 E1.8302
G1 X117.045 Y85.034 E1.882
G1 X118.508 Y84.977 E1.9331
G1 X120.012 Y84.957 E1.9857
G0 X120.012 Y84.537 F7800
G92 E0
G1 X121.513 Y84.556 E0.0524 F1750
G1 X123.007 Y84.614 E0.1046
G1 X124.498 Y84.71 E0.1568
G1 X125.987 Y84.844 E0.209
G1 X127.471 Y85.016 E0.2612
G1 X128.896 Y85.219 E0.3115
G1 X128.992 Y85.241 E0.3149
G1 X128.998 Y85.244 E0.3152
G1 X129.025 Y85.269 E0.3164
G1 X129.045 Y85.312 E0.3181
G1 X129.258 Y86.18 E0.3493
G1 X129.427 Y87.04 E0.3799
G1 X129.569 Y87.937 E0.4116
G1 X129.672 Y88.816 E0.4426
G1 X129.743 Y89.719 E0.4742
G1 X129.778 Y90.614 E0.5054
G1 X129.778 Y91.508 E0.5367
G1 X129.744 Y92.405 E0.568
G1 X129.675 Y93.298 E0.5993
G1 X129.571 Y94.188 E0.6306
G1 X129.433 Y95.073 E0.6619
G1 X129.261 Y95.952 E0.6932
G1 X129.063 Y96.791 E0.7233
G1 X129.045 Y96.848 E0.7254
G1 X129.041 Y96.858 E0.7257
G1 X129.034 Y96.868 E0.7262
G1 X129.027 Y96.878 E0.7266
G1 X129.018 Y96.887 E0.727
G1 X129.008 Y96.894 E0.7274
G1 X128.997 Y96.901 E0.7279
G1 X128.987 Y96.906 E0.7283
G1 X128.975 Y96.911 E0.7288
G1 X128.921 Y96.922 E0.7307
G1 X127.503 Y97.125 E0.7807
G1 X126.018 Y97.298 E0.8329
G1 X124.471 Y97.437 E0.8871
G1 X123.019 Y97.531 E0.938
G1 X121.545 Y97.588 E0.9895
G1 X120.031 Y97.608 E1.0424
G1 X118.529 Y97.589 E1.0948
G1 X117.036 Y97.532 E1.147
G1 X115.544 Y97.436 E1.1992
G1 X114.056 Y97.301 E1.2514
G1 X112.575 Y97.129 E1.3034
G1 X111.071 Y96.909 E1.3565
G1 X111.058 Y96.904 E1.357
G1 X111.043 Y96.897 E1.3576
G1 X111.03 Y96.888 E1.3582
G1 X111.014 Y96.873 E1.3589
G1 X110.984 Y96.8 E1.3617
G1 X110.786 Y95.973 E1.3914
G1 X110.613 Y95.096 E1.4226
G1 X110.473 Y94.199 E1.4543
G1 X110.369 Y93.31 E1.4856
G1 X110.3 Y92.429 E1.5164
G1 X110.265 Y91.533 E1.5477
G1 X110.264 Y90.637 E1.579
G1 X110.299 Y89.742 E1.6103
G1 X110.367 Y88.85 E1.6416
G1 X110.472 Y87.95 E1.6732
G1 X110.611 Y87.063 E1.7045
G1 X110.783 Y86.185 E1.7358
G1 X110.975 Y85.375 E1.7649
G1 X111.007 Y85.279 E1.7684
G1 X111.01 Y85.274 E1.7686
G1 X111.019 Y85.264 E1.7691
G1 X111.027 Y85.256 E1.7695
G1 X111.035 Y85.25 E1.7698
G1 X111.081 Y85.231 E1.7716
G1 X111.083 Y85.231 E1.7716
G1 X112.541 Y85.02 E1.8231
G1 X114.025 Y84.847 E1.8752
G1 X115.533 Y84.71 E1.9281
G1 X117.024 Y84.614 E1.9803
G1 X118.498 Y84.557 E2.0318
G1 X120.012 Y84.537 E2.0847
G0 X120.012 Y84.117 F7800
G92 E0
G1 X121.524 Y84.136 E0.0528 F1575
G1 X123.028 Y84.194 E0.1054
G1 X124.531 Y84.291 E0.158
G1 X126.03 Y84.426 E0.2105
G1 X127.525 Y84.6 E0.2631
G1 X128.973 Y84.806 E0.3142
G1 X129.117 Y84.839 E0.3194
G1 X129.161 Y84.856 E0.321
G1 X129.217 Y84.885 E0.3232
G1 X129.256 Y84.911 E0.3248
G1 X129.338 Y84.985 E0.3287
G1 X129.368 Y85.021 E0.3303
G1 X129.387 Y85.049 E0.3315
G1 X129.444 Y85.174 E0.3363
G1 X129.669 Y86.09 E0.3692
G1 X129.841 Y86.967 E0.4004
G1 X129.985 Y87.88 E0.4327
G1 X130.09 Y88.776 E0.4642
G1 X130.162 Y89.695 E0.4964
G1 X130.198 Y90.605 E0.5282
G1 X130.198 Y91.517 E0.5601
G1 X130.163 Y92.429 E0.5919
G1 X130.093 Y93.338 E0.6238
G1 X129.988 Y94.245 E0.6557
G1 X129.847 Y95.146 E0.6875
G1 X129.672 Y96.04 E0.7194
G1 X129.468 Y96.903 E0.7503
G1 X129.438 Y96.999 E0.7538
G1 X129.413 Y97.053 E0.7559
G1 X129.381 Y97.106 E0.7581
G1 X129.344 Y97.154 E0.7602
G1 X129.301 Y97.198 E0.7623
G1 X129.253 Y97.237 E0.7645
G1 X129.201 Y97.27 E0.7666
G1 X129.146 Y97.296 E0.7688
G1 X129.087 Y97.316 E0.7709
G1 X128.995 Y97.336 E0.7742
G1 X127.556 Y97.541 E0.825
G1 X126.062 Y97.716 E0.8775
G1 X124.504 Y97.856 E0.9321
G1 X123.041 Y97.95 E0.9834
G1 X121.556 Y98.008 E1.0353
G1 X120.031 Y98.028 E1.0885
G1 X118.519 Y98.009 E1.1413
G1 X117.015 Y97.951 E1.1939
G1 X115.512 Y97.854 E1.2465
G1 X114.013 Y97.719 E1.299
G1 X112.521 Y97.546 E1.3515
G1 X110.977 Y97.319 E1.406
G1 X110.901 Y97.295 E1.4088
G1 X110.827 Y97.259 E1.4117
G1 X110.761 Y97.212 E1.4145
G1 X110.691 Y97.144 E1.4179
G1 X110.662 Y97.108 E1.4195
G1 X110.645 Y97.079 E1.4207
G1 X110.583 Y96.929 E1.4263
G1 X110.375 Y96.062 E1.4575
G1 X110.2 Y95.169 E1.4893
G1 X110.056 Y94.256 E1.5215
G1 X109.951 Y93.351 E1.5534
G1 X109.881 Y92.453 E1.5848
G1 X109.845 Y91.542 E1.6167
G1 X109.844 Y90.629 E1.6486
G1 X109.879 Y89.718 E1.6804
G1 X109.949 Y88.809 E1.7122
G1 X110.056 Y87.894 E1.7444
G1 X110.197 Y86.991 E1.7763
G1 X110.372 Y86.096 E1.8082
G1 X110.57 Y85.259 E1.8382
G1 X110.62 Y85.113 E1.8436
G1 X110.64 Y85.074 E1.8451
G1 X110.673 Y85.023 E1.8473
G1 X110.712 Y84.976 E1.8494
G1 X110.757 Y84.934 E1.8515
G1 X110.806 Y84.897 E1.8537
G1 X110.848 Y84.873 E1.8554
G1 X110.949 Y84.832 E1.8592
G1 X111.001 Y84.818 E1.861
G1 X112.487 Y84.604 E1.9135
G1 X113.981 Y84.429 E1.966
G1 X115.5 Y84.292 E2.0193
G1 X117.002 Y84.195 E2.0718
G1 X118.487 Y84.137 E2.1237
G1 X120.012 Y84.117 E2.177
G0 X120.012 Y83.697 F7800
G92 E0
G1 X121.534 Y83.716 E0.0532 F1400
G1 X123.05 Y83.775 E0.1061
G1 X124.563 Y83.872 E0.1591
G1 X126.073 Y84.008 E0.212
G1 X127.579 Y84.183 E0.265
G1 X129.049 Y84.393 E0.3169
G1 X129.239 Y84.436 E0.3237
G1 X129.333 Y84.472 E0.3272
G1 X129.432 Y84.523 E0.3311
G1 X129.515 Y84.579 E0.3346
G1 X129.64 Y84.692 E0.3404
G1 X129.705 Y84.769 E0.3439
G1 X129.755 Y84.845 E0.3471
G1 X129.842 Y85.035 E0.3544
G1 X130.079 Y85.999 E0.3891
G1 X130.255 Y86.894 E0.4209
G1 X130.401 Y87.823 E0.4538
G1 X130.508 Y88.735 E0.4858
G1 X130.581 Y89.67 E0.5186
G1 X130.618 Y90.597 E0.551
G1 X130.618 Y91.524 E0.5834
G1 X130.583 Y92.453 E0.6159
G1 X130.511 Y93.379 E0.6483
G1 X130.404 Y94.301 E0.6807
G1 X130.261 Y95.218 E0.7131
G1 X130.083 Y96.129 E0.7455
G1 X129.873 Y97.014 E0.7773
G1 X129.83 Y97.15 E0.7823
G1 X129.785 Y97.249 E0.7861
G1 X129.728 Y97.344 E0.7899
G1 X129.661 Y97.431 E0.7938
G1 X129.584 Y97.509 E0.7976
G1 X129.498 Y97.579 E0.8015
G1 X129.404 Y97.638 E0.8054
G1 X129.305 Y97.685 E0.8092
G1 X129.2 Y97.721 E0.8131
G1 X129.069 Y97.75 E0.8177
G1 X127.611 Y97.958 E0.8692
G1 X126.105 Y98.133 E0.9221
G1 X124.536 Y98.275 E0.9771
G1 X123.062 Y98.37 E1.0287
G1 X121.567 Y98.428 E1.081
G1 X120.031 Y98.448 E1.1346
G1 X118.508 Y98.429 E1.1878
G1 X116.993 Y98.371 E1.2408
G1 X115.48 Y98.273 E1.2937
G1 X113.97 Y98.137 E1.3467
G1 X112.466 Y97.962 E1.3995
G1 X110.883 Y97.73 E1.4554
G1 X110.744 Y97.686 E1.4605
G1 X110.611 Y97.621 E1.4657
G1 X110.491 Y97.536 E1.4708
G1 X110.377 Y97.425 E1.4764
G1 X110.316 Y97.347 E1.4798
G1 X110.269 Y97.268 E1.483
G1 X110.183 Y97.058 E1.491
G1 X109.965 Y96.152 E1.5235
G1 X109.786 Y95.242 E1.5559
G1 X109.64 Y94.313 E1.5887
G1 X109.532 Y93.391 E1.6211
G1 X109.461 Y92.478 E1.6531
G1 X109.425 Y91.55 E1.6856
G1 X109.424 Y90.621 E1.718
G1 X109.46 Y89.694 E1.7504
G1 X109.531 Y88.769 E1.7828
G1 X109.64 Y87.837 E1.8156
G1 X109.783 Y86.918 E1.8481
G1 X109.962 Y86.007 E1.8805
G1 X110.166 Y85.144 E1.9115
G1 X110.231 Y84.951 E1.9186
G1 X110.275 Y84.863 E1.922
G1 X110.336 Y84.771 E1.9258
G1 X110.406 Y84.687 E1.9297
G1 X110.486 Y84.612 E1.9335
G1 X110.575 Y84.545 E1.9374
G1 X110.662 Y84.495 E1.9409
G1 X110.817 Y84.432 E1.9467
G1 X110.918 Y84.406 E1.9504
G1 X112.432 Y84.187 E2.0038
G1 X113.938 Y84.012 E2.0568
G1 X115.468 Y83.873 E2.1104
G1 X116.98 Y83.775 E2.1633
G1 X118.476 Y83.717 E2.2156
G1 X120.012 Y83.697 E2.2693
G0 X120.011 Y83.277 F7800
G92 E0
G1 X121.545 Y83.296 E0.0536 F1225
G1 X123.071 Y83.355 E0.1069
G1 X124.595 Y83.453 E0.1602
G1 X126.116 Y83.59 E0.2136
G1 X127.633 Y83.767 E0.2669
G1 X129.126 Y83.979 E0.3196
G1 X129.361 Y84.033 E0.328
G1 X129.504 Y84.088 E0.3333
G1 X129.647 Y84.162 E0.339
G1 X129.775 Y84.248 E0.3443
G1 X129.942 Y84.399 E0.3522
G1 X130.042 Y84.517 E0.3576
G1 X130.124 Y84.641 E0.3628
G1 X130.241 Y84.897 E0.3726
G1 X130.489 Y85.908 E0.409
G1 X130.668 Y86.82 E0.4415
G1 X130.817 Y87.766 E0.4749
G1 X130.926 Y88.694 E0.5075
G1 X131.001 Y89.645 E0.5408
G1 X131.038 Y90.589 E0.5738
G1 X131.038 Y91.532 E0.6068
G1 X131.002 Y92.477 E0.6398
G1 X130.929 Y93.419 E0.6728
G1 X130.82 Y94.358 E0.7058
G1 X130.675 Y95.291 E0.7388
G1 X130.493 Y96.218 E0.7718
G1 X130.278 Y97.126 E0.8044
G1 X130.223 Y97.3 E0.8107
G1 X130.158 Y97.445 E0.8163
G1 X130.075 Y97.582 E0.8219
G1 X129.978 Y97.707 E0.8274
G1 X129.867 Y97.821 E0.833
G1 X129.743 Y97.921 E0.8385
G1 X129.607 Y98.007 E0.8441
G1 X129.464 Y98.075 E0.8497
G1 X129.313 Y98.127 E0.8552
G1 X129.143 Y98.163 E0.8613
G1 X127.665 Y98.374 E0.9135
G1 X126.148 Y98.551 E0.9668
G1 X124.568 Y98.694 E1.0222
G1 X123.084 Y98.789 E1.0741
G1 X121.577 Y98.848 E1.1268
G1 X120.031 Y98.868 E1.1808
G1 X118.497 Y98.849 E1.2344
G1 X116.971 Y98.79 E1.2877
G1 X115.447 Y98.692 E1.341
G1 X113.927 Y98.555 E1.3943
G1 X112.411 Y98.379 E1.4476
G1 X110.79 Y98.141 E1.5049
G1 X110.587 Y98.077 E1.5123
G1 X110.396 Y97.983 E1.5197
G1 X110.222 Y97.86 E1.5272
G1 X110.064 Y97.706 E1.5349
G1 X109.97 Y97.586 E1.5402
G1 X109.892 Y97.458 E1.5454
G1 X109.782 Y97.188 E1.5556
G1 X109.555 Y96.242 E1.5896
G1 X109.372 Y95.316 E1.6225
G1 X109.224 Y94.37 E1.656
G1 X109.114 Y93.432 E1.6889
G1 X109.042 Y92.502 E1.7215
G1 X109.005 Y91.558 E1.7545
G1 X109.004 Y90.613 E1.7875
G1 X109.04 Y89.67 E1.8205
G1 X109.113 Y88.728 E1.8535
G1 X109.223 Y87.78 E1.8868
G1 X109.369 Y86.845 E1.9199
G1 X109.551 Y85.918 E1.9528
G1 X109.762 Y85.028 E1.9848
G1 X109.842 Y84.789 E1.9936
G1 X109.911 Y84.653 E1.9989
G1 X109.998 Y84.52 E2.0045
G1 X110.1 Y84.398 E2.01
G1 X110.216 Y84.289 E2.0156
G1 X110.344 Y84.194 E2.0211
G1 X110.477 Y84.117 E2.0265
G1 X110.684 Y84.032 E2.0343
G1 X110.835 Y83.993 E2.0398
G1 X112.378 Y83.771 E2.0942
G1 X113.895 Y83.594 E2.1475
G1 X115.435 Y83.454 E2.2015
G1 X116.958 Y83.356 E2.2549
G1 X118.465 Y83.297 E2.3075
G1 X120.011 Y83.277 E2.3615
G0 X120.011 Y82.857 F7800
G92 E0
G1 X121.556 Y82.876 E0.0539 F1050
G1 X123.093 Y82.936 E0.1076
G1 X124.628 Y83.034 E0.1614
G1 X126.159 Y83.173 E0.2151
G1 X127.687 Y83.35 E0.2688
G1 X129.203 Y83.566 E0.3223
G1 X129.483 Y83.63 E0.3323
G1 X129.676 Y83.703 E0.3395
G1 X129.863 Y83.8 E0.3468
G1 X130.034 Y83.917 E0.3541
G1 X130.244 Y84.105 E0.3639
G1 X130.378 Y84.264 E0.3712
G1 X130.492 Y84.437 E0.3784
G1 X130.639 Y84.758 E0.3908
G1 X130.899 Y85.818 E0.4289
G1 X131.082 Y86.747 E0.4619
G1 X131.233 Y87.709 E0.4959
G1 X131.344 Y88.653 E0.5291
G1 X131.42 Y89.62 E0.563
G1 X131.458 Y90.58 E0.5966
G1 X131.458 Y91.54 E0.6301
G1 X131.421 Y92.501 E0.6637
G1 X131.347 Y93.46 E0.6973
G1 X131.236 Y94.414 E0.7308
G1 X131.088 Y95.364 E0.7644
G1 X130.904 Y96.307 E0.7979
G1 X130.684 Y97.238 E0.8314
G1 X130.616 Y97.451 E0.8392
G1 X130.53 Y97.641 E0.8465
G1 X130.422 Y97.82 E0.8537
G1 X130.295 Y97.984 E0.861
G1 X130.15 Y98.132 E0.8683
G1 X129.987 Y98.263 E0.8755
G1 X129.81 Y98.375 E0.8828
G1 X129.623 Y98.465 E0.8901
G1 X129.425 Y98.532 E0.8974
G1 X129.218 Y98.577 E0.9048
G1 X127.718 Y98.791 E0.9577
G1 X126.191 Y98.969 E1.0114
G1 X124.601 Y99.112 E1.0672
G1 X123.105 Y99.209 E1.1195
G1 X121.589 Y99.268 E1.1725
G1 X120.031 Y99.288 E1.2269
G1 X118.486 Y99.269 E1.2809
G1 X116.95 Y99.209 E1.3345
G1 X115.415 Y99.111 E1.3883
G1 X113.884 Y98.973 E1.442
G1 X112.356 Y98.795 E1.4957
G1 X110.696 Y98.552 E1.5543
G1 X110.43 Y98.468 E1.564
G1 X110.18 Y98.345 E1.5737
G1 X109.952 Y98.184 E1.5835
G1 X109.75 Y97.987 E1.5933
G1 X109.623 Y97.824 E1.6005
G1 X109.516 Y97.648 E1.6077
G1 X109.381 Y97.317 E1.6202
G1 X109.144 Y96.331 E1.6556
G1 X108.959 Y95.389 E1.6892
G1 X108.808 Y94.427 E1.7232
G1 X108.696 Y93.473 E1.7567
G1 X108.623 Y92.527 E1.7899
G1 X108.585 Y91.567 E1.8234
G1 X108.584 Y90.605 E1.857
G1 X108.621 Y89.646 E1.8905
G1 X108.695 Y88.688 E1.9241
G1 X108.807 Y87.724 E1.958
G1 X108.956 Y86.772 E1.9916
G1 X109.141 Y85.829 E2.0252
G1 X109.358 Y84.912 E2.0581
G1 X109.454 Y84.627 E2.0686
G1 X109.546 Y84.442 E2.0758
G1 X109.66 Y84.269 E2.083
G1 X109.794 Y84.11 E2.0903
G1 X109.945 Y83.967 E2.0976
G1 X110.112 Y83.843 E2.1048
G1 X110.292 Y83.739 E2.1121
G1 X110.552 Y83.633 E2.1219
G1 X110.753 Y83.581 E2.1291
G1 X112.324 Y83.354 E2.1846
G1 X113.851 Y83.176 E2.2383
G1 X115.403 Y83.035 E2.2927
G1 X116.937 Y82.936 E2.3464
G1 X118.454 Y82.877 E2.3994
G1 X120.011 Y82.857 E2.4538
G92 E0
G1 E-1 F1800
G0 Z0.48 F1000
G0 X111.604 Y86.087 F7800
G0 Z0.08 F1000
G1 E0 F1800
G92 E0
G1 X111.776 Y85.916 E0.0085 F2100
G1 X112.47 Y85.816 E0.0329
G1 X111.446 Y86.839 E0.0835
G1 X111.376 Y87.198 E0.0963
G1 X111.319 Y87.56 E0.1091
G1 X113.148 Y85.732 E0.1994
G1 X113.82 Y85.653 E0.223
G1 X111.219 Y88.255 E0.3515
G1 X111.141 Y88.924 E0.375
G1 X111.141 Y88.927 E0.3751
G1 X114.481 Y85.586 E0.5401
G1 X115.135 Y85.527 E0.563
G1 X111.091 Y89.57 E0.7627
G1 X111.074 Y89.787 E0.7703
G1 X111.059 Y90.197 E0.7846
G1 X115.782 Y85.473 E1.0179
G1 X116.417 Y85.432 E1.0401
G1 X111.041 Y90.808 E1.3056
G1 X111.042 Y91.402 E1.3264
G1 X117.052 Y85.391 E1.6232
G1 X117.064 Y85.39 E1.6236
G1 X117.671 Y85.367 E1.6448
G1 X111.06 Y91.977 E1.9713
G1 X111.076 Y92.383 E1.9855
G1 X111.088 Y92.543 E1.9911
G1 X118.289 Y85.343 E2.3467
G1 X118.518 Y85.334 E2.3547
G1 X118.896 Y85.329 E2.368
G1 X111.131 Y93.094 E2.7515
G1 X111.142 Y93.235 E2.7564
G1 X111.188 Y93.631 E2.7703
G1 X119.498 Y85.321 E3.1807
G1 X120.012 Y85.314 E3.1987
G1 X120.098 Y85.315 E3.2017
G1 X111.253 Y94.16 E3.6385
G1 X111.333 Y94.674 E3.6567
G1 X120.685 Y85.322 E4.1185
G1 X121.271 Y85.33 E4.139
G1 X111.422 Y95.18 E4.6255
G1 X111.519 Y95.676 E4.6431
G1 X121.849 Y85.346 E5.1533
G1 X122.42 Y85.369 E5.1733
G1 X111.63 Y96.159 E5.7062
G1 X111.641 Y96.207 E5.7079
G1 X112.108 Y96.275 E5.7244
G1 X122.992 Y85.391 E6.262
G1 X123.55 Y85.427 E6.2815
G1 X112.626 Y96.351 E6.821
G1 X112.677 Y96.359 E6.8228
G1 X113.156 Y96.414 E6.8397
G1 X124.108 Y85.463 E7.3806
G1 X124.438 Y85.484 E7.3921
G1 X124.661 Y85.504 E7.3999
G1 X113.689 Y96.476 E7.9418
G1 X114.136 Y96.528 E7.9575
G1 X114.223 Y96.536 E7.9606
G1 X125.205 Y85.553 E8.503
G1 X125.75 Y85.603 E8.5221
G1 X114.768 Y96.585 E9.0645
G1 X115.312 Y96.634 E9.0836
G1 X126.286 Y85.661 E9.6256
G1 X126.818 Y85.723 E9.6443
G1 X115.863 Y96.677 E10.1854
G1 X116.421 Y96.713 E10.2049
G1 X127.35 Y85.785 E10.7446
G1 X127.372 Y85.787 E10.7454
G1 X127.871 Y85.858 E10.763
G1 X116.979 Y96.749 E11.3009
G1 X117.076 Y96.756 E11.3043
G1 X117.549 Y96.774 E11.3208
G1 X128.391 Y85.932 E11.8563
G1 X128.398 Y85.933 E11.8565
G1 X128.5 Y86.348 E11.8714
G1 X128.511 Y86.406 E11.8735
G1 X118.121 Y96.796 E12.3866
G1 X118.55 Y96.812 E12.4016
G1 X118.696 Y96.814 E12.4068
G1 X128.609 Y86.902 E12.8963
G1 X128.662 Y87.175 E12.906
G1 X128.699 Y87.406 E12.9142
G1 X119.283 Y96.822 E13.3792
G1 X119.869 Y96.829 E13.3997
G1 X128.779 Y87.919 E13.8397
G1 X128.799 Y88.043 E13.8441
G1 X128.846 Y88.446 E13.8583
G1 X120.467 Y96.825 E14.2721
G1 X121.069 Y96.817 E14.2931
G1 X128.905 Y88.981 E14.6802
G1 X128.949 Y89.532 E14.6995
G1 X121.675 Y96.805 E15.0587
G1 X122.293 Y96.781 E15.0803
G1 X128.98 Y90.095 E15.4105
G1 X129.001 Y90.629 E15.4292
G1 X129.001 Y90.668 E15.4306
G1 X122.911 Y96.758 E15.7313
G1 X122.979 Y96.755 E15.7337
G1 X123.544 Y96.718 E15.7535
G1 X129.001 Y91.261 E16.023
G1 X129.001 Y91.494 E16.0311
G1 X128.987 Y91.87 E16.0443
G1 X124.179 Y96.678 E16.2817
G1 X124.411 Y96.663 E16.2899
G1 X124.825 Y96.625 E16.3044
G1 X128.958 Y92.493 E16.5085
G1 X128.908 Y93.136 E16.531
G1 X125.478 Y96.566 E16.7004
G1 X125.939 Y96.525 E16.7166
G1 X126.137 Y96.502 E16.7235
G1 X128.834 Y93.805 E16.8567
G1 X128.801 Y94.083 E16.8665
G1 X128.737 Y94.495 E16.8811
G1 X126.809 Y96.423 E16.9763
G1 X127.402 Y96.354 E16.9972
G1 X127.484 Y96.342 E17.0001
G1 X128.615 Y95.212 E17.0559
G1 X128.502 Y95.788 E17.0764
G1 X128.461 Y95.959 E17.0826
G1 X128.177 Y96.244 E17.0966
G1 X128.402 Y96.211 E17.1045
G1 X128.461 Y95.959 E17.1136
G92 E0
G1 E-1 F1800
G0 Z0.68 F1000
; layer 3, Z = 0.28
; tool H0.2 W0.42
M104 S185 T0
M106 S255
G0 X119.007 Y81.207 F7800
G0 Z0.28 F1000
G1 E0 F1800
G92 E0
G1 X121.435 Y81.215 E0.0848 F2400
G1 X123.464 Y81.296 E0.1557
G1 X125.631 Y81.447 E0.2316
G1 X126.097 Y81.278 E0.2489
G1 X126.344 Y81.467 E0.2597
G1 X126.709 Y81.565 E0.2729
G1 X127.437 Y81.649 E0.2985
G1 X127.776 Y81.627 E0.3104
G1 X128.09 Y81.512 E0.3221
G1 X128.334 Y81.701 E0.3328
G1 X128.688 Y81.815 E0.3458
G1 X129.416 Y81.925 E0.3716
G1 X129.985 Y82.061 E0.392
G1 X130.489 Y82.272 E0.4111
G1 X131.008 Y82.595 E0.4324
G1 X131.459 Y83.004 E0.4537
G1 X131.791 Y83.426 E0.4724
G1 X132.085 Y83.966 E0.4939
G1 X132.271 Y84.503 E0.5137
G1 X132.649 Y86.213 E0.5749
G1 X132.896 Y87.793 E0.6308
G1 X133.047 Y89.387 E0.6867
G1 X133.099 Y90.985 E0.7425
G1 X133.047 Y92.763 E0.8046
G1 X132.896 Y94.354 E0.8604
G1 X132.616 Y96.108 E0.9225
G1 X132.249 Y97.712 E0.9799
G1 X132.085 Y98.183 E0.9974
G1 X131.828 Y98.66 E1.0163
G1 X131.408 Y99.196 E1.0401
G1 X131.011 Y99.551 E1.0587
G1 X130.489 Y99.876 E1.0801
G1 X129.985 Y100.087 E1.0992
G1 X129.416 Y100.224 E1.1197
G1 X128.733 Y100.327 E1.1438


...


G1 X114.886 Y90.213 E0.8468
G1 X115.009 Y89.984 E0.8559
G1 X115.104 Y89.729 E0.8654
G1 X115.145 Y89.545 E0.872
G1 X115.171 Y89.283 E0.8812
G1 X115.149 Y89.027 E0.8902
G1 X115.079 Y88.73 E0.9008
G1 X115.008 Y88.544 E0.9078
G1 X114.899 Y88.339 E0.9159
G1 X114.759 Y88.136 E0.9245
G1 X114.564 Y87.915 E0.9348
G1 X114.28 Y87.661 E0.9481
G1 X113.922 Y87.43 E0.963
G1 X113.633 Y87.3 E0.974
G1 X113.262 Y87.203 E0.9875
G1 X112.8 Y87.157 E1.0037
G1 X112.498 Y87.207 E1.0143
G1 X112.289 Y87.285 E1.0221
G1 X112.069 Y87.422 E1.0312
G1 X111.907 Y87.586 E1.0392
G1 X111.756 Y87.858 E1.0501
G1 X111.547 Y88.556 E1.0755
G1 X111.423 Y88.76 E1.0839
G1 X111.347 Y88.829 E1.0875
G1 X111.268 Y88.872 E1.0906
G1 X111.229 Y88.883 E1.092
G1 X111.03 Y88.907 E1.099
G1 X110.887 Y88.884 E1.1041
G1 X110.775 Y88.823 E1.1085
G1 X110.705 Y88.761 E1.1118
G1 X110.642 Y88.681 E1.1154
G1 X110.587 Y88.569 E1.1197
G1 X110.558 Y88.451 E1.1239
G1 X110.552 Y88.311 E1.1289
G1 X110.579 Y88.151 E1.1345
G1 X110.692 Y87.882 E1.1447
G1 X110.788 Y87.741 E1.1507
G1 X110.921 Y87.595 E1.1576
G1 X111.195 Y87.373 E1.1699
G1 X111.367 Y87.262 E1.177
G1 X111.573 Y87.16 E1.185
G1 X111.955 Y87.036 E1.1991
G1 X112.061 Y87.014 E1.2028
G1 X112.331 Y86.972 E1.2124
G1 X112.633 Y86.955 E1.223
G1 X113.014 Y86.976 E1.2363
G1 X113.264 Y87.007 E1.2451
G1 X113.621 Y87.078 E1.2578
G1 X114.085 Y87.225 E1.2748
G1 X114.566 Y87.451 E1.2933
G1 X114.873 Y87.638 E1.3059
G92 E0
G1 E-1 F1800
G0 Z2.68 F1000
; layer 22, Z = 2.08
G0 X120.021 Y90.877 F7800
G0 Z2.08 F1000
G1 E0 F1800
G92 E0
G1 X120.454 Y90.93 E0.0152 F560
G1 X120.638 Y91.127 E0.0247
G1 X120.533 Y91.203 E0.0292
G1 X120.519 Y91.208 E0.0297
G1 X120.021 Y91.268 E0.0472
G1 X119.523 Y91.208 E0.0647
G1 X119.509 Y91.203 E0.0653
G1 X119.354 Y91.092 E0.0719
G1 X119.349 Y91.073 E0.0726
G1 X119.354 Y91.054 E0.0733
G1 X119.509 Y90.943 E0.08
G1 X119.523 Y90.938 E0.0805
G1 X120.021 Y90.877 E0.098
G0 X120.021 Y90.454 F7800
G92 E0
G1 X120.618 Y90.527 E0.021 F490
G1 X120.67 Y90.546 E0.0229
G1 X120.999 Y90.899 E0.0398
G1 X121.14 Y91.152 E0.0499
G1 X121.111 Y91.255 E0.0537
G1 X121.095 Y91.293 E0.0551
G1 X121.06 Y91.341 E0.0572
G1 X120.731 Y91.577 E0.0713
G1 X120.618 Y91.619 E0.0755
G1 X120.021 Y91.692 E0.0965
G1 X119.424 Y91.619 E0.1175
G1 X119.31 Y91.577 E0.1218
G1 X118.982 Y91.342 E0.1359
G1 X118.981 Y91.341 E0.1359
G1 X118.918 Y91.073 E0.1455
G1 X118.981 Y90.805 E0.1552
G1 X118.982 Y90.804 E0.1552
G1 X119.311 Y90.568 E0.1693
G1 X119.424 Y90.526 E0.1735
G1 X120.021 Y90.454 E0.1945
G0 X120.021 Y90.031 F7800
G92 E0
G1 X120.717 Y90.116 E0.0245 F420
G1 X120.909 Y90.186 E0.0316
G1 X121.342 Y90.65 E0.0538
G1 X121.591 Y91.099 E0.0717
G1 X121.508 Y91.397 E0.0825
G1 X121.462 Y91.502 E0.0865
G1 X121.362 Y91.642 E0.0925
G1 X120.93 Y91.952 E0.1111
G1 X120.717 Y92.03 E0.119
G1 X120.021 Y92.115 E0.1435
G1 X119.325 Y92.03 E0.168
G1 X119.112 Y91.952 E0.1759
G1 X118.681 Y91.643 E0.1944
G1 X118.591 Y91.517 E0.1998
G1 X118.486 Y91.073 E0.2158
G1 X118.591 Y90.628 E0.2317
G1 X118.681 Y90.503 E0.2371
G1 X119.113 Y90.193 E0.2557
G1 X119.325 Y90.115 E0.2636
G1 X120.021 Y90.031 E0.2881
G92 E0
G1 E-1 F1800
; layer 23, Z = 2.28
G0 X115.58 Y89.121 F7800
G0 Z2.28 F1000
G1 E0 F1800
G92 E0
G1 X115.629 Y89.254 E0.0049 F490
G1 X115.671 Y89.427 E0.0112
G1 X115.702 Y89.75 E0.0225
G1 X115.689 Y89.876 E0.0269
G1 X115.599 Y90.208 E0.039
G1 X115.507 Y90.413 E0.0468
G1 X115.397 Y90.598 E0.0543
G1 X115.17 Y90.906 E0.0676
G1 X114.799 Y91.328 E0.0873
G1 X114.146 Y92.003 E0.1201
G1 X113.96 Y92.219 E0.13
G1 X113.762 Y92.482 E0.1415
G1 X113.58 Y92.825 E0.1551
G1 X113.484 Y93.161 E0.1673
G1 X113.452 Y93.473 E0.1783
G1 X113.427 Y93.406 E0.1808
G1 X113.39 Y93.234 E0.1869
G1 X113.374 Y93.092 E0.1919
G1 X113.385 Y92.932 E0.1975
G1 X113.411 Y92.76 E0.2036
G1 X113.478 Y92.551 E0.2112
G1 X113.556 Y92.387 E0.2176
G1 X113.654 Y92.218 E0.2244
G1 X113.928 Y91.901 E0.239
G1 X114.09 Y91.731 E0.2472
G1 X114.886 Y90.912 E0.2871
G1 X115.076 Y90.683 E0.2975
G1 X115.252 Y90.422 E0.3085
G1 X115.439 Y90.049 E0.3231
G1 X115.534 Y89.745 E0.3342
G1 X115.595 Y89.288 E0.3503
G1 X115.58 Y89.121 E0.3562
G92 E0
G1 E-1 F1800
G0 Z2.68 F1000
G0 X115.098 Y87.81 F7800
G0 Z2.28 F1000
G1 E0 F1800
G92 E0
G1 X115.439 Y88.12 E0.0161 F420
G1 X115.668 Y88.399 E0.0287
G1 X115.74 Y88.509 E0.0333
G1 X115.952 Y88.914 E0.0493
G1 X116.032 Y89.132 E0.0574
G1 X116.086 Y89.357 E0.0655
G1 X116.124 Y89.751 E0.0793
G1 X116.104 Y89.953 E0.0864
G1 X115.995 Y90.351 E0.1008
G1 X115.88 Y90.606 E0.1105
G1 X115.748 Y90.83 E0.1196
G1 X115.498 Y91.169 E0.1344
G1 X115.108 Y91.613 E0.155
G1 X114.457 Y92.287 E0.1877
G1 X114.287 Y92.483 E0.1968
G1 X114.118 Y92.708 E0.2066
G1 X113.972 Y92.984 E0.2175
G1 X113.898 Y93.241 E0.2268
G1 X113.865 Y93.562 E0.2381
G1 X113.905 Y93.94 E0.2514
G1 X114.016 Y94.277 E0.2638
G1 X114.158 Y94.525 E0.2737
G1 X114.394 Y94.807 E0.2866
G1 X114.718 Y95.07 E0.3012
G1 X114.948 Y95.197 E0.3103
G1 X115.188 Y95.284 E0.3193
G1 X115.546 Y95.339 E0.3319
G1 X115.836 Y95.326 E0.3421
G1 X116.084 Y95.263 E0.351
G1 X116.318 Y95.132 E0.3604
G1 X116.476 Y94.98 E0.368
G1 X116.627 Y94.747 E0.3777
G1 X116.712 Y94.49 E0.3872
G1 X116.743 Y94.157 E0.3988
G1 X116.716 Y93.549 E0.4201
G1 X116.688 Y93.203 E0.4322
G1 X116.884 Y93.203 E0.439
G1 X116.983 Y93.877 E0.4628
G1 X117.098 Y94.528 E0.4859
G1 X117.214 Y95.001 E0.5029
G1 X117.309 Y95.322 E0.5146
G1 X116.406 Y95.461 E0.5465
G1 X115.974 Y95.502 E0.5617
G1 X115.742 Y95.507 E0.5698
G1 X115.229 Y95.456 E0.5878
G1 X114.811 Y95.353 E0.6028
G1 X114.424 Y95.191 E0.6175
G1 X114.031 Y94.944 E0.6337
G1 X113.745 Y94.703 E0.6468
G1 X113.554 Y94.502 E0.6564
G1 X113.375 Y94.271 E0.6666
G1 X113.289 Y94.139 E0.6721
G1 X113.162 Y93.901 E0.6816
G1 X113.023 Y93.523 E0.6956
G1 X112.975 Y93.301 E0.7035
G1 X112.953 Y93.101 E0.7106
G1 X112.967 Y92.887 E0.7181
G1 X113.001 Y92.664 E0.726
G1 X113.087 Y92.396 E0.7358
G1 X113.184 Y92.191 E0.7437
G1 X113.31 Y91.973 E0.7525
G1 X113.617 Y91.619 E0.7689
G1 X113.787 Y91.44 E0.7775
G1 X114.574 Y90.631 E0.8169
G1 X114.739 Y90.431 E0.826
G1 X114.889 Y90.209 E0.8353
G1 X115.049 Y89.891 E0.8477
G1 X115.123 Y89.654 E0.8564
G1 X115.172 Y89.278 E0.8697
G1 X115.153 Y89.05 E0.8777
G1 X115.065 Y88.684 E0.8908
G1 X114.92 Y88.368 E0.9029
G1 X114.696 Y88.05 E0.9165
G1 X114.371 Y87.714 E0.9328
G1 X114.135 Y87.526 E0.9434
G1 X113.959 Y87.411 E0.9507
G1 X113.702 Y87.277 E0.9609
G1 X113.399 Y87.162 E0.9722
G1 X113.204 Y87.117 E0.9791
G1 X113.261 Y87.113 E0.9811
G1 X113.471 Y87.124 E0.9885
G1 X113.769 Y87.176 E0.999
G1 X114.109 Y87.274 E1.0114
G1 X114.367 Y87.376 E1.0211
G1 X114.696 Y87.543 E1.034
G1 X115.098 Y87.81 E1.0508
G92 E0
G1 E-1 F1800
G0 Z2.88 F1000
; layer 24, Z = 2.48
G0 X119.708 Y92.59 F7800
G0 Z2.48 F1000
G1 E0 F1800
G92 E0
G1 X119.86 Y92.608 E0.0053 F420
G1 X119.962 Y92.654 E0.0092
G1 X120.044 Y92.729 E0.0131
G1 X120.095 Y92.804 E0.0163
G1 X120.125 Y92.882 E0.0192
G1 X120.131 Y92.942 E0.0213
G1 X120.127 Y92.972 E0.0224
G1 X120.034 Y93.216 E0.0315
G1 X119.947 Y93.392 E0.0384
G1 X119.882 Y93.583 E0.0454
G1 X119.854 Y93.763 E0.0518
G1 X119.868 Y94.002 E0.0601
G1 X119.913 Y94.201 E0.0672
G1 X119.962 Y94.32 E0.0717
G1 X119.857 Y94.325 E0.0754
G1 X119.785 Y94.271 E0.0786
G1 X119.625 Y94.074 E0.0874
G1 X119.495 Y93.844 E0.0966
G1 X119.404 Y93.584 E0.1063
G1 X119.373 Y93.458 E0.1108
G1 X119.346 Y93.235 E0.1186
G1 X119.357 Y93.039 E0.1255
G1 X119.381 Y92.92 E0.1297
G1 X119.481 Y92.722 E0.1375
G1 X119.514 Y92.683 E0.1393
G1 X119.586 Y92.625 E0.1425
G1 X119.68 Y92.593 E0.146
G1 X119.708 Y92.59 E0.147
G92 E0
G1 E-1 F1800
G0 Z2.88 F1000
G0 X121.103 Y88.462 F7800
G0 Z2.48 F1000
G1 E0 F1800
G92 E0
G1 X121.258 Y88.468 E0.0054 F490
G1 X121.663 Y89.921 E0.0581
G1 X122.079 Y91.558 E0.1171
G1 X122.219 Y91.796 E0.1267
G1 X122.516 Y92.01 E0.1395
G1 X122.825 Y92.056 E0.1504
G1 X122.662 Y92.165 E0.1573
G1 X122.499 Y92.419 E0.1678
G1 X122.424 Y92.721 E0.1787
G1 X122.54 Y93.293 E0.1991
G1 X122.496 Y93.317 E0.2008
G1 X122.343 Y92.858 E0.2177
G1 X122.109 Y92.061 E0.2467
G1 X121.531 Y89.928 E0.3239
G1 X121.103 Y88.462 E0.3772
G92 E0
G1 E-1 F1800
G0 Z2.88 F1000
G0 X120.139 Y87.939 F7800
G0 Z2.48 F1000
G1 E0 F1800
G92 E0
G1 X120.92 Y88.035 E0.0275 F420
G1 X121.293 Y88.049 E0.0405
G1 X121.735 Y88.041 E0.0559
G1 X121.785 Y88.057 E0.0578
G1 X121.616 Y88.19 E0.0653
G1 X122.069 Y89.813 E0.1241
G1 X122.471 Y91.396 E0.1812
G1 X122.536 Y91.506 E0.1856
G1 X122.679 Y91.61 E0.1918
G1 X122.869 Y91.638 E0.1985
G1 X123.015 Y91.591 E0.2039
G1 X123.144 Y91.472 E0.21
G1 X123.593 Y90.512 E0.247
G1 X124.028 Y89.478 E0.2862
G1 X124.154 Y89.631 E0.2931
G1 X124.214 Y89.75 E0.2978
G1 X124.297 Y89.85 E0.3023
G1 X124.443 Y90.172 E0.3147
G1 X124.403 Y90.388 E0.3224
G1 X124.246 Y90.896 E0.3409
G1 X124.101 Y91.265 E0.3548
G1 X124.017 Y91.437 E0.3615
G1 X123.796 Y91.799 E0.3763
G1 X123.426 Y92.285 E0.3976
G1 X123.983 Y92.68 E0.4214
G1 X124.012 Y92.705 E0.4228
G1 X123.796 Y92.589 E0.4314
G1 X123.479 Y92.391 E0.4444
G1 X123.326 Y92.336 E0.4501
G1 X123.127 Y92.359 E0.4571
G1 X122.969 Y92.466 E0.4637
G1 X122.89 Y92.587 E0.4688
G1 X122.855 Y92.73 E0.4739
G1 X122.962 Y93.26 E0.4928
G1 X123.003 Y93.486 E0.5008
G1 X123.007 Y93.547 E0.503
G1 X122.859 Y93.6 E0.5084
G1 X122.349 Y93.87 E0.5286
G1 X122.26 Y93.905 E0.5319
G1 X122.229 Y93.842 E0.5344
G1 X121.942 Y92.983 E0.566
G1 X121.705 Y92.175 E0.5954
G1 X121.127 Y90.042 E0.6726
G1 X120.706 Y88.604 E0.725
G1 X120.583 Y88.347 E0.7349
G1 X120.456 Y88.169 E0.7425
G1 X120.331 Y88.048 E0.7486
G1 X120.139 Y87.939 E0.7563
G92 E0
G1 E-1 F1800
G0 Z2.88 F1000
G0 X116.823 Y93.273 F7800
G0 Z2.48 F1000
G1 E0 F1800
G92 E0
G1 X116.825 Y93.284 E0.0004 F420
G1 X116.838 Y93.47 E0.0069
G1 X116.833 Y93.468 E0.0071
G1 X116.797 Y93.338 E0.0118
G1 X116.787 Y93.274 E0.0141
G1 X116.823 Y93.273 E0.0153
G92 E0
G1 E-1 F1800
G0 Z2.88 F1000
G0 X116.008 Y89.44 F7800
G0 Z2.48 F1000
G1 E0 F1800
G92 E0
G1 X116.057 Y89.753 E0.0111 F420
G1 X116.02 Y90.07 E0.0222
G1 X115.947 Y90.316 E0.0312
G1 X115.835 Y90.564 E0.0406
G1 X115.695 Y90.794 E0.0501
G1 X115.426 Y91.123 E0.0649
G1 X115.418 Y91.132 E0.0653
G1 X115.416 Y91.002 E0.0699
G1 X115.406 Y90.978 E0.0708
G1 X115.434 Y90.708 E0.0802
G1 X115.455 Y90.674 E0.0817
G1 X115.56 Y90.168 E0.0997
G1 X115.594 Y90.088 E0.1027
G1 X115.857 Y89.704 E0.119
G1 X116.008 Y89.44 E0.1296
G92 E0
G1 E-1 F1800
; layer end
M104 S0 T0 ; turn off extruder 0
M104 S0 T1 ; turn off extruder 0
M140 S0 ; turn off bed
G28 X0;
G28 Y0;
M84 ; disable motors
; Build Summary
;   Build time: 6.59 min (0.11 hr)
;   Plastic volume: 1118.22 mm^3 (1.12 cc)
;   Filament length: 464.9 mm
;   Material cost: $0.05 (€0.04)
I've had my the Simplify 3D software for a day and haven't even done one print with my Felix 3.0 Dual. The Felix profile is only for a single extruder so I made my own and everything heats up correctly but it doesn't start the print. It starts the print with the single extruder profile but heats up both extruders.

Can you at least print with both extruders (not at the same time) by assigning which extruder to use?
Felix 3.0 Dual, Simplify 3D, Solidworks

Legion 2.3
Posts: 84
Joined: Sun Apr 20, 2014 6:23 pm

Post by Legion 2.3 »

I can print without problems when I have only 1 extruder in my list. If I add more, I get a strange G-code. I tried the Replicator 2X-profile (which has 2 extruders) and the G-code is flawless, although I can´t use it for my Felix. Maybe it works if I adjust this profile to make it compatible with the Felix 3.0, it´s worth a try.

Formatize
Posts: 16
Joined: Thu May 29, 2014 5:17 pm

Post by Formatize »

I managed to print with simplify 3D but I haven't tried dual extrusion yet.

I took the leapfrog profile (the right extruder) and removed the lower bed command in the ending G code and reconfigured the bed size. I also adjusted some other settings but it seems to work fine.

Note that when you are only selecting one extruder to print that in the temperature setting it should say the the non-selected extruder has a temperature of 0. Just have a look at the leapfrog profiles and you should get a good idea of whats going on. I've contacted support with my issues and they have been very responsive (a reply a day though).

I'm going to try dual extrusion soon because I want to print Acetal/POM with PLA or PVA support. I'll post my results if it goes well.
Felix 3.0 Dual, Simplify 3D, Solidworks

Post Reply