V3.0 Spool Holder Bearing Part#

Help eachother out with assembly problems.
Post Reply
seaton
Posts: 291
Joined: Tue May 14, 2013 9:04 am
Location: Bunbury, Western Australia
Contact:

V3.0 Spool Holder Bearing Part#

Post by seaton »

As I'm upgrading from my V2 to-> Version 3 I obviously didn't receive any bearings for the spool holders, Can a V3 owner please let me know the bearing part number that's marked on it so I can source locally.

The instructions only provide measurements, not part numbers.

Cheers,

Stephen..
Stephen...

Felix 2.0 -> Felix 3.0 dual
Simplify3D Slicer, Kisslicer
Have you added your Felix to the Map? http://goo.gl/maps/HajnZ

http://blog.strobotics.com.au

User avatar
DDME-Marc
Posts: 71
Joined: Sun Nov 24, 2013 11:04 pm
Location: New Zealand

Post by DDME-Marc »

Hi Stephen,

Bearing part number is:

6804Z


Cheers,

Marc
Felix 3.0 Dual Head * E3D Titan V6 * Repetier-Host V2.1.3 * Repetier-Firmware 0.92.9 (01/08/17 - Modified) * KISSlicer Pro - 1.6.3 * Arduino 1.8.5 *

seaton
Posts: 291
Joined: Tue May 14, 2013 9:04 am
Location: Bunbury, Western Australia
Contact:

Post by seaton »

many thanks
Stephen...

Felix 2.0 -> Felix 3.0 dual
Simplify3D Slicer, Kisslicer
Have you added your Felix to the Map? http://goo.gl/maps/HajnZ

http://blog.strobotics.com.au

bruno-16OOO
Posts: 12
Joined: Sat Jul 20, 2013 12:31 pm

Post by bruno-16OOO »

hi seaton,

Where did you find the upgrade 2>3 kit ? can't find it on the store ?

seaton
Posts: 291
Joined: Tue May 14, 2013 9:04 am
Location: Bunbury, Western Australia
Contact:

Post by seaton »

bruno-16OOO wrote:hi seaton,

Where did you find the upgrade 2>3 kit ? can't find it on the store ?
I had some major problems with my V2 printer and parts were sent to me (thanks support) when the V3 started shipping last year
Stephen...

Felix 2.0 -> Felix 3.0 dual
Simplify3D Slicer, Kisslicer
Have you added your Felix to the Map? http://goo.gl/maps/HajnZ

http://blog.strobotics.com.au

bruno-16OOO
Posts: 12
Joined: Sat Jul 20, 2013 12:31 pm

Post by bruno-16OOO »

ok, so i will wait ...
thanks

Renevanderknaap
Posts: 9
Joined: Sun Jul 07, 2013 11:22 pm
Location: Netherlands

Post by Renevanderknaap »

Seaton,

I finaly received my upgradekit, i have 2 bearings but no spoolholders. Are they available as .stl files to be printed or just parts included in the upgradekit? In that case my kit is not complete

Thanks

undergroundsurf
Posts: 16
Joined: Wed Jul 31, 2013 6:07 pm
Location: Switzerland

Post by undergroundsurf »

Your kit is complete. You'll find them in the download section..

Renevanderknaap
Posts: 9
Joined: Sun Jul 07, 2013 11:22 pm
Location: Netherlands

Post by Renevanderknaap »

Thank you.

Regards René

Post Reply